Capillary gas chromatography of lower aliphatic C2?C5 aldehydes in the free form as a group of pungent odorants in air

The capillary gas chromatography of the C₂-C₅ lower aliphatic aldehydes (e.g.,acetaldehyde, propionaldehyde, n- and i-butyraldehydes, n- and i-valeraldehydes) which, in the free form in air, have unpleasant odors and low threshold odor values, has been studied using cold-trap preconcentration with liquid oxygen. The capillary column outlet was connected to enable simultaneous detection by FID, ECD, FPD AND FTD (SID).     

硝酸、硫化钠溶液浸取冷原子荧光法选择性测定土壤及河流沉积物中硫化汞

本文研究了饱和硫化钠溶液对土壤样品中硫化汞的浸取效率(其加标回收率达100%),以及用硝酸和硫化钠溶液对样品中汞的选择性浸取并研究了土壤中硫化汞垂直分布。提出了利用硝酸、饱和硫化钠溶液浸取,由冷原子荧光法选择性测定土壤及河流沉积物中硫化汞的新方法。用该方法对同一样品进行8次测定,其相对标准偏差为7.1%。     

Comment on papers by K. Shanahan that propose to explain anomalous heat generated by cold fusion

Dr. Shanahan has published two papers (Thermochim. Acta 428 (2005) 207, Thermochim. Acta 382 (2002) 95) in which he argues that excess heat claimed to be produced by cold fusion is actually caused by errors in heat measurement. In particular, he proposes that unrecognized changes in the calibration constant are produced by changes in the locations where heat is being generated within the electrolytic cell over the duration of the measurement. Because these papers may lend unwarranted support to rejection of cold fusion claims, these erroneous arguments used by Shanahan need to be answered.     

Simultaneous Determination of Four Active Components in a Compound Formulation by Liquid Chromatography

Summary A rapid and accurate LC method is described for simultaneous determination of pseudoephedrine hydrochloride (PSE), acetaminophen (AMP), dextromethorphen hydrobromide (DEX), and diphenhydramine hydrochloride (DPH) in a compound formulation. Chromatographic separation of the four drugs was achieved on a Hypersil CN column (150 mm × 4.6 mm, 5 m particle) by use of a mobile phase comprising a mixture of 3 mM ion-pairing solution, 2% aqueous triethylamine solution, and 2 M phosphoric acid, 68:48:88 (v/v), pH 3.0, delivered at 1.0 mL min^–1. Compounds were detected at 215 nm and the run time was less than 10 min. The linearity, accuracy, and precision of the method were found to be acceptable over the concentration ranges 6.1–36.4 g mL^–1 for PSE, 65.0–390.0 g mL^–1 for AMP, 3.1–18.6 g mL^–1 for DEX, and 5.0–30.0 g mL^–1 for DPH.     

Two-beam interference detection of the changes in fibre structural parameters during low drawing process

A Pluta polarizing interference microscope with a fibre stretching device attached was used to detect the changes in molecular structure that occur during the fibre cold drawing process. Fibres drawn with low draw ratios show different types of deformation mechanisms. The interference patterns recorded at different draw ratios are used to relate the deformation mechanisms with the measured structural parameters. Some optical parameters are measured such as; refractive indices nand n birefringence n, the polarizability per unit volume , the orientation distribution function f(θ), the angle θ between the stretching direction and the chain axis, and the angle θ_m which the transition dipole moment of the molecular species makes with the molecular axis (chain axis). Three polymeric fibres (Polyethylene terephthalate PET, Polypropylene PP and Polyamide PA) were used in this study and their interferograms are illustrated.     

The intersection marker method for 3D interface tracking of deformable surfaces in finite volumes

Currently, the majority of computational fluid dynamics (CFD) codes use the finite volume method to spatially discretise the computational domain, sometimes as an array of cubic control volumes. The Finite volume method works well with single‐phase flow simulations, but two‐phase flow simulations are more challenging because of the need to track the surface interface traversing and deforming within the 3D grid. Surface area and volume fraction details of each interface cell must be accurately accounted for, in order to calculate for the momentum exchange and rates of heat and mass transfer across the interface. To attain a higher accuracy in two‐phase flow CFD calculations, the intersection marker (ISM) method is developed. The ISM method is a hybrid Lagrangian–Eulerian front‐tracking algorithm that can model an arbitrary 3D surface within an array of cubic control volumes. The ISM method has a cell‐by‐cell remeshing capability that is volume conservative and is suitable for the tracking of complex interface deformation in transient two‐phase CFD simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

Accuracy and CPU time of JE-TLM,PLRC-TLM and CRC-TLM methods for plasma medium

The current density (JE), the piecewise linear recursive convolution (PLRC) and the constant convolution recursive (CRC) techniques are developed and integrated into the transmission line matrix (TLM) algorithm. A comparison of these three schemes according to the criteria of accuracy and CPU time is presented. Numerical experiments show that JE provides the most accurate solution and requires the least CPU time; PLRC is nearly as accurate but consumes more CPU time than CRC.     

Simulating Dirac fermions with Abelian and non-Abelian gauge fields in optical lattices

In this work we present an optical lattice setup to realize a full Dirac Hamiltonian in 2+1 dimensions. We show how all possible external potentials coupled to the Dirac field can arise from perturbations of the existing couplings of the honeycomb lattice pattern. This greatly simplifies the proposed implementations, requiring only spatial modulations of the intensity of the laser beams to induce complex non-Abelian potentials. We finally suggest several experiments to observe the properties of the quantum field theory in the setup.     

真空冷却过程中实验条件对真空冷却速率的影响

以熟肉为实验材料,对实验条件对真空冷却速率的影响进行了理论分析和实验研究。实验结果表明:真空室有效容积越小、真空泵抽速越高,则真空冷却时间就会越短;冷阱温度对真空冷却速率有着明显的影响;当真空室内的最终压力在0.4～0.61kPa变化时,熟肉的表面温度一直在0℃以上,其真空冷却的时间随着真空室内压力的升高而增加。而真空室内的最终压力在0.3kPa左右时,熟肉的表面温度在真空冷却过程会低于0℃。     

聚变实验堆真空室壳体成型残余应力分析

为了了解聚变实验堆真空室壳体表面残余应力的分布以及退火工艺对残余应力的影响，通过模拟分析和实验检测两种方式对不锈钢316LN冷压曲面和热压曲面残余应力进行研究，获得退火前后曲面表面残余应力的大小，得到冷压曲面和热压曲面残余应力的分布以及退火工艺对残余应力分布的影响。研究结果为分析成型工艺提供数据支撑，对中国聚变工程实验堆真空室的研究与制造具有重要意义。