苯二酚异构体电迁移行为预测与研究

系统研究了邻、间、对苯二酚3种异构体在毛细管区带电泳中的迁移行为,从理论上分析了解离常数、缓冲液pH与迁移行为之间的关系,进行了定量预测。通过实验讨论了缓冲溶液类型及浓度、缓冲溶液的pH、分离电压等因素对三种异构体分离的影响,获得了优化的分离条件。结果表明,使用未涂层石英毛细管柱(50μmi.d.,50 cm,有效长度为45 cm),在检测波长225 nm,硼砂缓冲溶液30 mmol/L,pH为8.5~9.15,分离电压为10~25 kV的条件下,苯二酚3种异构体均可按对、间、邻的顺序得到基线分离,实验结果与理论预测相符。     

碳原子线的抗菌性能

Antibacterial effects of a new material, carbon atom wires (CAWs), another allotropic form of carbon based on sp hybridization, were investigated by various methods including zone of inhibition, bacterial colonies and conductivity measurements．The bacteria used in the research were Bacillus subtilis(ATCC9372), Staphylococcus aureus(ATCC25923) and Proteus vulgaris(49102). As experimental results indicated, CAWs exhibited well inhibitory effects on the bacteria tested. An excellent biocompatibility of pyrolytic carbon has been well recognized. The additional inherency of the new material against bacterial growth could be potentially utilized in medical applications.     

Remarkable ability of spiral orthogonal zone plate in generating various focused optical vortices

We propose an amplitude spiral orthogonal zone plate (ASOZP) as a Cartesian-based spiral zone plate for generating variety of optical vortices. The presented model is made by overlapping closely a vertical spiral one-dimensional zone plate and a horizontal one. We demonstrate that the element produces diversity of focused vortices, in a way that the vorticity and number of the produced vortices could be easily manipulated. In addition, the generated vortices show rotation features in the vicinity of the focal plane. Furthermore, it is demonstrated that diffraction efficiency of the model is much more higher than the previously introduced Cartesian-based elements. We finally verify numerical results by experimental studies.     

Sequence‐based separation of single‐stranded DNA at high salt concentrations in capillary zone electrophoresis

DNA separation by fragment length can be readily achieved using sieving gels in electrophoresis. Separation by sequence has not been as simple, generally requiring adequate differences in native or induced conformation between single or hybridized strands or differences in thermal or chemical stability of hybridized strands. Previously, it was shown that four single‐stranded DNA (ssDNA) 76‐mers that differ by only a few A‐G substitutions could be separated based solely on sequence by adding guanosine‐5’‐monophosphate to the running buffer in capillary zone electrophoresis (CZE). The separation was attributed to interactions of the ssDNA with self‐assembled guanine‐tetrad structures; however, subsequent studies of an expanded set of ten 76‐mers showed that the separation was a more general phenomenon that occurred at high salt concentrations. With the long‐term goal of using experimental and computational methods to provide insight into the basis of the separation, a set of ssDNA 15‐mers was designed including a poly(dT) 15‐mer and nine variants. Separations were performed using fluorescent‐labeled ssDNA in CZE with laser‐induced fluorescence detection. Results show that separation improves with increasing buffer concentration and decreasing temperature, due at least in part to longer separation times. Migration times increase with increasing purine content, with A having a much larger effect that G. Circular dichroism spectra of the mixtures of the strands suggest that the separation is not due to changes in conformation of the ssDNA at high salt concentrations.     

DNA fragment separations by on‐line combination of capillary isotachophoresis–capillary zone electrophoresis with UV detection

A high‐speed DNA fragment separation system based on an on‐line combination of capillary ITP with CZE (CITP‐CZE) and using UV detection at 260 nm was developed. A novel CITP‐CZE buffer system of pH 6.1 was designed for the separation of ten DNA fragments with sizes ranging from 100 to 1000 bp. An effect of underivatized α‐, β‐ and γ‐cyclodextrins on the resolution of DNA fragments in the CZE step of the CITP‐CZE combination was systematically investigated. Methylhydroxyethylcellulose present in the BGE was used to eliminate the EOF. DNA ladder fragments were separated within 10 min with LODs in the range of 1–5 ng/μL (S/N = 3). The RSDs of the migration time and peak area of individual DNA fragments were in the range of 1–3 and 3–9%, respectively. The developed CITP‐CZE system was further applied to the analysis of digest plasmid DNA samples.     

Simultaneous separation and rapid determination of spironolactone and its metabolite canrenone in different pharmaceutical formulations and urinary matrices by capillary zone electrophoresis

The aim of this study was to develop a novel, sensitive, precise, simple, and rapid capillary zone electrophoresis method for the quality control of spironolactone in three different formulation types and a rapid simultaneous determination of the content of spironolactone and canrenone in urine samples using fluocinonide as an internal standard. After optimization of separation conditions, the electrolyte solution was the pH 5.5, 20 mM phosphate buffer containing 4.5 g/L sulfated‐β‐cyclodextrin, 15 kV of electric filed across the capillary applied at 25°C. A diode array detector was used, and the detection wavelength was 260 nm. Under optimum conditions, good linearity was achieved with correlation coefficients from 0.9976 to 0.9997. Detection limits were 0.56 and 0.20 μg/mL, and the quantitation limits were 1.87 and 0.67 μg/mL, respectively. Excellent accuracy and precision were obtained. Recoveries of the analytes varied from 100.8 to 103.1%. The results indicated that baseline separation of analytes was obtained and this method was suitable for quantitative determination of spironolactone in pharmaceutical preparations and rapid simultaneous determination of the content of spironolactone and its major metabolite canrenone in urine samples.     

Experimental study of the formation of high-resistivity zones at the gel/buffer interface in CE

A novel, nondamaging method for experimental characterization of the formation and propagation of high-resistivity zones in CE, based on the measurement of time-dependent Joule heating on the outer capillary surface is proposed. The method detects propagation of resistive regions in capillaries in real time and allows the estimation of their velocity and resistance. The presented experimental data are in agreement with the results of the computer simulation as well as with previous data on the subject. The proposed method is useful for the development of new polymers as well as for the refinement and optimization of new CE protocols.     

New cloud vapor zone (CVZ) coupled headspace solid-phase microextraction technique

A new cloud vapor zone (CVZ)-based headspace solid-phase microextraction (HS-SPME) technique has been demonstrated with the capability of heating the sample matrix and simultaneously cooling the sampling zone. A bi-temperature-controlled (BTC) system, allowing 10 mL of test sample heating and headspace external-cooling, was employed for the CVZ formation around the SPME-fiber sampling area. In the CVZ procedure, the heated headspace vapor undergoes a sudden cooling near the SPME to form a dense cloud of analyte–water vapor, which is helpful for adsorption or absorption of the analyte. The device was evaluated for the quantitative analysis of aqueous chlorothalonil. Parameters influencing sampling efficiency, e.g., SPME fiber coating, SPME sampling temperature and time, solution modifier, addition of salt, sample pH, and temperature, were investigated and optimized thoroughly. The proposed BTC-HS-SPME method afforded a best extraction efficiency of above 94% accuracy (less than 4.1% RSD, n = 7) by using the PDMS fiber to collect chlorothalonil in the headspace at 5 °C under the optimized condition, i.e., heating sample solution (added as 10% ethylene glycol and 30% NaCl, at pH 7.0) at 130 °C for 15 min. The detection was linear from 0.01 to 80 μg L⁻¹ with a regression coefficient of 0.9998 and had a detection limit of 3.0 ng L⁻¹ based on S/N = 3. Practical application was demonstrated by analyzing chlorothalonil in farm water samples with promising results and recoveries. The approach provided a very simple, fast, sensitive, and solvent-free procedure to collect analytes from aqueous solution. The approach can provide a new platform for other sensitive HS-SPME assays.     

Fresnel波带板编码成像技术

 介绍了Fresnel波带板编码成像原理,并设计出高空间分辨率的Fresnel波带板编码相机,用双孔可见光源对编码相机的成像进行了实验研究,表明该编码相机可以真实地还原源区的空间大小和形状。     

Estimation of the Refractive Index Change in Glass Induced by Femtosecond Laser Pulses

It is known that local refractive index change occurs when femtosecond laser pulses with extremely high peak power are launched into glass. We focused 130-femtosecond laser pulses of 800 nm into the bulk of glass and examined the shape of the induced refractive index change. We found that the length of the spot of the refractive index change along the optical axis reached about 30 μm despite the diameter being about 2 μm. To estimate the distribution of induced refractive index change, we fabricated Bragg grating by scanning the focused spot and calculated the amount of the change by applying Kogelnik’s coupled mode theory to the measured diffraction efficiencies of the higher order diffracted beams.