PREPARATION AND PROPERTIES OF CLAY/POLY(N-ISOPROPYLACRYLAMIDE-co-ACRYL AMIDE)NANOCOMPOSITE HYDROGELS

Polymer hydrogels as a kind of soft materials have attracted increasing scientific and technological interest in past several decades. These materials have been applied widely in many fields [1], such as molecular filter [2,3], superabsorbent [4], and contact lenses [5] etc. However, synthetic polymeric hydrogels are seldom used as mechanical devices due to the lack of mechanical strength. Therefore, it is very imperative to improve their mechanical properties for wider use of polymeric hydrog…     

An impedance study of Ir(210) in HCl solutions

In the Ir(210)/aqueous HCl solution system the “hydrogen adsorption region” is due to the combined process of hydrogen and chloride ion adsorption. We demonstrate that by using impedance spectroscopy the rates of, and charges associated with, hydrogen and chloride adsorption rates can be determined separately. Published in Elektrokhimiya in Russian, 2009, Vol. 45, No. 1, pp. 32–41. Dedicated to the 100th anniversary of B.V. Ershler. The text was submitted by authors in English.     

移动加热器法生长碲锌镉晶体的组分输运与界面形貌研究

移动加热器法(THM)生长碲锌镉晶体时,界面稳定性对晶体生长的质量有很大影响。本文基于多物理场有限元仿真软件Comsol建立了THM生长碲锌镉晶体的数值模拟模型,讨论了Te边界层与组分过冷区之间的关系,对不同生长阶段的物理场、Te边界层与组分过冷区进行仿真研究,最后讨论了微重力对物理场分布的影响,并对比了微重力与正常重力下的生长界面形貌。模拟结果表明,Te边界层与组分过冷区的分布趋势是一致的,在不同生长阶段,流场中次生涡旋的位置会发生移动,从而导致生长界面的形貌随着生长的进行发生变化,同时微重力条件下形成的生长界面形貌最有利于单晶生长。因此,在晶体生长的中前期,对次生涡旋位置的控制和对组分过冷的削弱,是THM生长高质量晶体的有效方案。     

Similarity solutions for non-Newtonian power-law fluid flow

The problem of the boundary layer flow of power law non-Newtonian fluids with a novel boundary condition is studied.The existence and uniqueness of the solutions are examined,which are found to depend on the curvature of the solutions for different values of the power law index n.It is established with the aid of the Picard-Lindel¨of theorem that the nonlinear boundary value problem has a unique solution in the global domain for all values of the power law index n but with certain conditions on the curvature of the solutions.This is done after a suitable transformation of the dependent and independent variables.For 0 n 1,the solution has a positive curvature,while for n 1,the solution has a negative or zero curvature on some part of the global domain.Some solutions are presented graphically to illustrate the results and the behaviors of the solutions.     

基于光纤智能夹层传感结构的应力测量研究

制作了一种模块化的光纤传感夹层,对夹层内的光纤传感器的应力特性进行了实验研究。分析了应变对传感系数的影响,对埋入到光纤智能夹层中的两种光纤传感器的输出特性进行了比较。实验结果表明:光纤Bragg光栅传感器的波长漂移与应变之间具有理想的线性关系,但应变灵敏度由1.2pm/με降至1.15pm/με;由于制作工艺的局限,对于非本征F-P光纤传感器,当应变达到350με后,应变与载荷具有较好的线性响应。与非本征F-P光纤传感器相比,光纤Bragg光栅传感器是光纤智能夹层首选的应变传感器。将埋入了Bragg光栅传感器的智能夹层粘贴于某型飞机的翼-身连接构件内部进行监测,实验结果为光纤智能夹层应用于复合材料结构的应变监测提供了参考。     

卫星减振的试验研究

根据某卫星发射对减振性能的要求,本文提出在适配器与星箭界面之间安装整星隔振器并且在适配器表面粘贴约束阻尼层的减振方案。并且利用振动台分别对卫星减振系统施加垂向和横向的基础激励,测量卫星上关键位置处的加速度响应,比较减振前后其频率响应特性的变化,以验证卫星减振方案的减振性能。试验结果的对比分析验证了此卫星减振系统能够隔离卫星高频段的横向和垂向振动,降低卫星结构频率响应的幅值,能够减小运载火箭发射时传递给卫星的环境载荷,提高卫星发射的可靠性。本文对于相关的航天器的减振设计具有实用的参考价值。     

Numerical solution of the problem of the mixing of the boundary layers shed from the trailing edge of a wing

During the mixing of viscous incompressible flows with different velocities, in the vicinity of a trailing edge an interaction region with a three-layer structure is formed, similar to that in the case of symmetric shedding with equal velocities. The boundary layers developing on the upper and lower sides of the airfoil form a viscous mixing layer, or vortex sheet, which separates the flows downstream of the trailing edge. The boundary value problem corresponding to the flow in the viscous sublayer in the vicinity of the trailing edge of a flat plate is solved for high Reynolds numbers using an efficient numerical method for solving the equations of asymptotic interaction theory.     

Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

碳钢的高应力冲击磨损行为研究

在高应力冲击磨损条件下，金属材料的磨损表面很容易形成硬度很高（ＨＶ≥１０００）的白层．采用新的试验方法，研究了碳钢在高应力冲击条件下的磨损特征，并且从分析白层的结构出发，讨论了白层的形成机制和失效模式．结果表明，材料的高应力冲击磨损质量损失与冲击次数之间具有线性关系，韧性较好的低碳钢的耐磨性比高碳钢的好，原因是硬度越高，白层在磨损过程中越容易发生剥层与剥落．白层是一种高度塑性变形层，其内部精细结构的变形特征证实了白层的塑性变形机制     

大气边界层的一些空气动力学特征

本文在定常和中性温度层结条件下,首先介绍了均匀平坦地面上大气边界层的一些空气动力学特征,并将大气边界层与一般空气动力学边界层作了比较。然后介绍了地面粗糙度分布有阶跃变化以及非平坦地形上的大气边界层特征。文中说明,气流的平均流场结构以及湍流特性与均匀平坦地面的情形相比有显著不同。最后,提出了一些有待今后进一步研究的问题。