集成微管路离子选择电极功能块研究

本文对微型管状离子选择电极在流动条件下的电化学特征进行了研究,并设计了新的集成微管路离子选择以电极功能块。用此微型装置测定了土壤、血清、水和药物中的K~+、Na~+、pH、Cl~-、F~-、阿托品、东茛菪碱,并和各种标准方法作了比较,获得满意分析结果。     

Die Kristallstruktur von wasserfreiem Melaminiumchlorid

Crystal Structure of non‐aqueous Melaminium Chloride Melaminium chloride was obtained as colorless, needle‐shaped, single crystalline material from solid state reactions between melamin and ammonium chloride. The structure of [C₃N₆H₇]Cl was refined by single crystal X‐ray diffraction: I2/m, Z = 8, a = 852.87(4), b = 1704.4(1) c = 918.44(4) pm and β = 92.165(6)°. The crystal structure contains melaminium ions stacked to columns along [100] and linked via N‐H···N bridges to form bands along [001]. Both of the two distinct chloride ions are stabilized by six hydrogen bonds through distorted trigonal prismatic arrangements of hydrogen atoms to yield a supramolecular structure.     

A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.     

Determination of chloride ion in aqueous samples by isotope-dilution Fourier-transform flame infrared emission (ID-FIRE) spectrometry

An isotope dilution method for the determination of chloride ion in aqueous samples is described. The method makes use of the isotopic shift in the rotational lines of the 1–0 band of HCl emitted in the near infrared region of the spectrum by vibrationally excited HCl molecules present in a hydrogen/entrained air flame. Chloride ion in the sample is converted to chlorine gas by electrolysis and swept into a hydrogen/entrained air flame where it is converted into HCl. Because isotope dilution is an absolute method of analysis, matrix effects are minimized, and the chlorine generation step need not be quantitative. With the system described in this paper, samples must contain at least 9 mg of chloride ion per ml, and a 2-ml sample is required. Over the range from 10 to 30 mg Cl⁻ ml⁻¹, the average error was −0.96%, and the average relative standard deviation was 3.3% for seven samples using seven of the more intense lines in the P branch. Compared with standard silver nitrate titrations, the isotope dilution procedure was not affected by such common interferences as bromide ion and iodide ion. The technique was applied to several seawater samples from different regions.     

Diffusion Mechanisms of Zeolite Catalysts

The diffusion mechanisms within zeolite catalysts, such as resistance to diffusion at pore mouths, configurational diffusion, adsorption-controlled diffusion, influence of co-existing molecules and pore blocking, were overviewed. Two kinds of diffusivities, the intracrystalline diffusivity and the effective diffusivity, were discussed separately to clarify the diffusion mechanism.     

Determination of chloride by stripping chronopotentiometry with silver-film electrode

The experimental parameters of cathodic stripping chronopotentiometry of chloride at a silver-film electrode are investigated and optimized. The chloride preconcentration is achieved in the form of silver chloride by a controlled potential oxidation of the working electrode under vigorous stirring. Cathodic stripping of the deposit is obtained by the constant current, under the condition of diffusive mass transfer. Deaeration of the solution is not necessary. A detection limit of 35 μ dm⁻³ (10⁻⁶ mol dm⁻³) is obtained at a deposition time of 180 s, with a reproducibility of 6.7 % (expressed as relative standard deviation, RSD).     

All-solid-state planar miniature ion-selective chloride electrode

All-solid-state ion-selective electrodes with plastic membrane (poly(vinyl chloride) (PVC), bis(2-ethylhexyl) sebacate (DOS), methyltri-n-tetradecylammonium chloride (MTTACl)), a conducting poly(pyrrole) (PPy) film doped either with chloride ions (PPyCl) or hexacyanoferrate(II) ions (PPyFeCN), and glassy carbon (GC) or screen-printed graphite layer (S-PG) as an inner electric contact were investigated. All the electrodes show close to Nernstian response, but their lifetimes vary. The at least 2-months lifetime of screen-printed electrodes is only achieved for the electrodes containing PPyFeCN (cation-exchanging film). Shorter lifetime of other screen-printed electrodes, i.e. without PPy, or with PPyCl (anion-exchanging film), was attributed to the diffusion of anionic products of the hydrolysis of organic components of the graphite paste used to prepare the electric contact. The properties of miniature, screen-printed electrodes comprising PPyFeCN solid contact, were comparable to those ion-selective electrodes with PPy solid contact (regardless the ion-exchanging characteristic of the polymer) deposited on GC electric contact.     

超临界NaCl水溶液的分子动力学模拟

采用分子动力学模拟的方法对超临界NaCl水溶液的微观结构进行了研究.模拟发现在所研究超临界条件下,密度的变化比温度的变化对超临界NaCl水溶液的微观结构影响更大.温度及密度对Cl－ H2O径向分布函数的影响比对Na＋ H2O径向分布函数的影响要大.超临界条件下,各gNa＋－Cl－在0.261 nm处出现峰值,表明Na＋、Cl－之间发生了离子的缔合.超临界条件下,随温度增加,缔合作用增强；随密度增加,缔合作用减弱.本文工作为建立可适用于超临界条件下的电解质热力学模型提供了依据.     

Ion chromatographic determination of chloride,chlorate, and perchlorate in sulfuric acid solutions

Summary The determination of chloride and perchlorate by non-suppressed ion chromatography in aqueous process solutions containing a high sulfate background is described. The method is reliable and fast. The sensitivity for perchlorate is lower than for other anions like nitrate, nitrite and chlorate. The detection limits are about 0.3 g/ml with linear calibration curves within a concentration range from 1 to 50 g/ml.