Conjugated polymer nanoparticles as fluorescence switch for selective cell imaging

Fluorescence switch plays a vital role in bioelectronics and bioimaging.Herein,we presented a new kind of facile electrostatic complex nanoparticles(ECNs)for fluorescence switching in cells and marking of individual cell.The ECNs were prepared by mixing positively charged poly(6-(2-(thiophen-3-yl)ethoxy)hexyl trimethylammonium bromide)(PT)and negatively charged diarylethene sodium salt(DAECOONa).DAE-COONa is a photoswitchable molecule which can be transformed between the ring-closed fo rm and ring-open form under the irradiation of UV or visible light.The closed-form of DAE-COONa can efficie ntly quench the fluorescence of PT through intermolecular energy transfer,while the open form of DAE-COONa does not influence the emission of PT.Thus,the fluorescence of ECNs can be modulated by light irradiation,and the ECNs with good fluorescence switching performance have been employed for fluorescence imaging and individual cell lighting up process successfully.We demonstrate that the electrostatic complex strategy provides a facile method to construct fluorescence switch fo r selective cell marking and imaging applications.     

壳聚糖溶液pH对载细胞海藻酸钠-壳聚糖微胶囊性能的影响

以激光共聚焦扫描显微镜为研究手段, 原位直观地考察了在不同pH条件下聚电解质膜的络合程度和蛋白扩散情况. 通过分析pH值对微胶囊膜性能的影响规律, 并结合不同种类细胞对环境pH的敏感特性, 确定了制备细胞培养用海藻酸钠-壳聚糖微胶囊的最佳pH值. 结果表明, 当壳聚糖溶液的pH值由3.50增加到6.50, 微胶囊膜的络合深度呈现高-低-高的趋势, 而微胶囊膜的膨胀性能呈现低-高-低的趋势, 模型蛋白通过微囊膜的扩散呈现低-高-低的趋势, 拐点均出现在pH=4.00和5.50处. 结合动物细胞及微生物细胞对环境pH耐受能力的考察, 确定制备微囊化动物细胞时, 微胶囊成膜反应溶液的最佳pH值为5.50; 制备微囊化大肠杆菌时, 反应溶液的最佳pH值为5.00; 制备微囊化酵母菌时, 反应溶液的最佳pH值为4.50.     

Co@SiO2核壳式纳米粒子的合成、性质表征及在细胞分离和细胞芯片上的应用

合成了Co@SiO2核壳式纳米粒子, 并采用透射电镜(TEM)、 X射线衍射(XRD)、扫描电镜(SEM)和振动样品磁强计(VSM)对其形状、尺寸、荧光及磁特性进行了表征, 探讨了其在细胞分离和细胞芯片上的应用和原理.     

Effects of ultrasound on Microcystis aeruginosa cell destruction and release of intracellular organic matter

Harmful algal blooms negatively impact ecosystems and threaten drinking water sources. One potential method to effectively counteract algal blooms is ultrasonication. However, ultrasonication can easily lead to the release of intracellular organic matter (IOM). The purpose of this study was to investigate the relationship between the destruction of algal cells and IOM release at different ultrasound frequencies. Microcystis aeruginosa cells were ultrasonicated at 20 kHz with an intensity of 0.038 W/mL, 740 kHz with an intensity of 0.113 W/mL, and 1120 kHz with an intensity of 0.108 W/mL. The IOM release was detected by fluorescence spectroscopy in addition to the more commonly used haemocytometry and optical density. After ultrasonication for 15 min, the removal rate of algal cells reached 10.5% at 20 kHz, 9.46% at 740 kHz, and 35.4% at 1120 kHz. The 20 kHz and 740 kHz ultrasound caused local damage to algal cells and then disrupted them, whereas the 1120 kHz ultrasound directly disrupted most algal cells. The extracellular organic matter (EOM), which was increased by ultrasonication, mainly consisted of protein-like compounds, chlorophyll, and a small amount of humic-like substances. Gas vacuoles had been destructed before the cells were broken, as indicated by the decrease of cell size and the wrinkles on the cell surface. Moreover, the removal of algae cells while upholding integrity is more conducive to the safety of the water environment.     

Physics-based plasticity model incorporating microstructure changes for severe plastic deformation

During machining processes, materials undergo severe deformations that lead to different behavior than in the case of slow deformation. The microstructure changes, as a consequence, affect the materials properties and therefore influence the functionality of the component. Developing material models capable of capturing such changes is therefore critical to better understand the interaction process–materials. In this paper, we introduce a new physics model associating Mechanical Threshold Stress (MTS) with Dislocation Density (DD) models. The modeling and the experimental results of a series of large strain experiments on polycrystalline copper (OFHC) involving sequences of shear deformation and strain rate (varying from quasi-static to dynamic) are very similar to those observed in processes such as machining. The Kocks–Mecking model, using the mechanical threshold stress as an internal state variable, correlates well with experimental results and strain rate jump experiments. This model was compared to the well-known Johnson–Cook model that showed some shortcomings in capturing the stain jump. The results show a high effect of rate sensitivity of strain hardening at large strains. Coupling the mechanical threshold stress dislocation density (MTS–DD), material models were implemented in the Abaqus/Explicit FE code. The model shows potentialities in predicting an increase in dislocation density and a reduction in cell size. It could ideally be used in the modeling of machining processes.     

Organic Nanocrystals Based on a Solid-emission-tunable AIEgen for Cell Imaging

The development of fluorescent nanocrystals based on organic small molecules is of great importance in bioimaging due to the merits of easy modification,high brightness and excellent photostability,however suffering from the emission-detrimental aggregation-caused quenching(ACQ)effect.Herein,we successfully designed and synthesized an AIE-active di(N,N-dimethylaniline)-dibenzofulvene(named as NFTPE),which exhibits the crystallization-induced emission enhancement(CIEE)effect.Interestingly,two types of yellow-and orange-emissive crystals for NFTPE were obtained,exhibiting aggregation microenvironment-dependent emission tuning in the solid state.Single-crystal analysis and density functional theory(DFT)calculations reveal that different aggregation microenvironments result in the distinct molecular conformation for various emission.Excitingly,the crystallization of NFTPE in an aqueous solution under the assistance of amphiphilic PEG polymer matrices could be monitored in situ by the fluorescence changes,facilitating the preparation of NFTPE nanocrystals(NFTPE-NCs)by adjusting the aggregation microenvironment.The obtained NFTPE-NCs exhibit the superior performance in cell imaging in respect to high brightness,photostability,and biocompatibility,thus demonstrating the potential in bioimaging applications.     

Synthesis, Crystal Structure and Inhibition of the K562 Cell Proliferation of N＇-Tertbutylaminocarbonyl-N-2-chlorophenoxyacetylthiourea

The title compound N'-tert-butylaminocarbonyl-N-2-chlorophenoxyacetylthiou- rea has been synthesized for the first time. Complete assignments were achieved by IR, 1H NHR and single-crystal X-ray diffraction analyses. The inhibitory rate of the cellular growth of K562 cells (chronic myeloid 1eukemic cells) was measured using MTT [3-(4,5-dimethylthiazo-2-y1)-2,5-di- phenyltetra-zolium bromide] assay. The cell apoptosis was assessed by agarose gel electrophoresis to find that the title compound has antiproliferation and apoptosis inducing effects on K562 cells. In order to investigate the relationship between structure and activity of the target compound, we report its crystal structure and biological behavior in the present paper. Crystallographic data: C14H18- ClN3O3S, Mr = 343.82, orthorhombic, space group Pnma, a = 19.786(6), b = 6.789(2), c = 12.938(4) , V = 1738.0(9) 3, Z = 4, Dc = 1.314 g/cm3, F(000) = 720, μ(MoKα) = 0.354 mm-1, R = 0.0378 and wR = 0.0941. The molecule is a planar structure.     

白血病细胞酶联免疫酶催化银沉积于插指电极阵列电化学免疫分析新方法

建立了一种检测白血病细胞表面抗原的细胞酶联免疫电化学分析新方法. 该方法兼有细胞酶联免疫分析抗原、抗体结合的特异性和插指电极阵列酶催化银沉积电化学分析的灵敏性. 在聚苯乙烯微孔板中包被白血病细胞, 先后加入鼠抗人抗体及碱性磷酸酶(ALP)标记的马抗鼠抗体, ALP催化抗坏血酸磷酸酯(AAP)水解成抗坏血酸(AA), AA使银离子还原成银单质并沉积到插指电极阵列表面, 导致插指电极阵列上相邻两个梳齿导通. 通过对电导率的测定, 可实现对细胞表面抗原的高灵敏分析. 此分析方法灵敏度高(可检测出50个左右的HL-60细胞)、特异性好, 且可用于大量样品的分析, 为白血病等肿瘤疾病的早期诊断和免疫分型提供了新技术. 此外, 该方法也可用于细胞表面分子基因工程抗体活性的检测.     

Evaluation of photodynamic therapy (PDT) procedures using microfluidic system

A hybrid PDMS/glass microfluidic system for evaluation of the efficiency of photodynamic therapy is presented. 5-aminolevulinic acid (ALA) was used as a precursor of photosensitizer. The geometry of the microdevice presented in this paper enables to test different concentrations of the photosensitizer in a single assay. The viability of the A549 cells was determined 24 h after PDT procedure (irradiation with light which induced a photosensitizer accumulated in carcinoma cells, λ = 625 nm). The presented results confirmed the possibility to perform the photodynamic therapy process in vitro in microscale and the possibility to assess its effectiveness. Moreover, because two identical microstructures on a single chip were performed, the microchip can be used for examination simultaneously various cell lines (carcinoma and normal) or various photosensitizers.