Stage-frit: A straightforward sub-2 μm nano-liquid chromatography column fabrication for proteomic analysis

In this work we demonstrated a facile method for the fabrication of C18 coordination polymer gel in a capillary, called stage-frit, which was efficiently applied to pack sub-2 μm C18 beads into the capillary by a high pressure bomb for the online separation of proteolytic peptides. The back pressure of the column with 10 cm × 75 μm i.d. is regularly lower than 170 bar at a flow rate of 300 nl/min, which could be operated on a common nanoLC system instead of nanoUPLC system due to the good permeability, low back pressure and high mechanical stress of the frit that will totally reduce the cost for the purchase of instrument. The stage-frit allows long-term continuous flow of the solvent and no significant beads loss or pressure instability was observed during the period. The repeatability of retention time for fifteen BSA tryptic peaks was found to be less than 1.08% (RSD) in six time nanoLC-ESI-MS/MS experiments. The average full width at half maximum (FWHM) of peptide peaks is 5.87 s. The sub-2 μm stage-frit nanoLC column showed better sensitivity than the commercial available for large scale proteomic analysis of total tissue proteins from human spleen. The number of identified peptides is approximately 0.4-fold and 0.2-fold higher than that obtained by utilizing commercial columns packed with 3 μm and 1.8 μm C18 materials, respectively. In the field of analytical chemistry, particularly the use of nanoLC systems, stage-frit nanoLC column offers a great potential for the separation of complex mixtures.     

氟苯尼考胶体金免疫层析定量检测方法的建立

建立了定量检测氟苯尼考的胶体金免疫层析方法.对胶体金标记抗体时溶液pH和抗体浓度、金标抗体用量、检测线上抗原浓度以及检测时间进行了优化.采用胶体金试纸条读取仪测定试纸条检测线和质控线的信号强度,以标准品的浓度为横坐标,阳性样本和阴性样本的检测线/质控线的信号比值(Bx/B0)为纵坐标建立标准曲线.结果表明,胶体金免疫层析试纸定量检测氟苯尼考的线性范围为0.1~1.5 ng/mL,检出限为0.08 ng/mL,检测时间为15 min.本方法具有简便、快速和可定量等特点,适于大批量样品的现场筛查.     

Determination of various inorganic anions and organic acids in the atmospheric particulate matter using capillary zone electrophoresis with indirect UV detection

Capillary zone electrophoresis with indirect UV detection was developed for the simultaneous analysis of inorganic anions and organic acids using a mixed solution of 2,6-pyridinedicarboxylic acid and cetyltrimethylammonium hydroxide as the background electrolyte (BGE). The parameters which influence the separation, such as indirect UV detection wavelength, BGE conditions, applied voltage and extraction conditions were investigated. Thirteen inorganic anions and organic acids were detected within 20 min. The calibration curves of each analyte were linear with correlation coefficients greater than 0.991. The relative standard deviations (n = 10) of the peak areas ranged from 0.6% to 3.3%. The detection limits for these species ranged from 0.4 to 1.4 mg/L at a signal-to-noise ratio of 3. The recovery rate of each analyte was more than 80% under optimised extraction conditions, except for nitrite. The proposed method was applied towards the analysis of inorganic anions and organic acids in the atmospheric particulate matter using an Andersen sampler. The particle size of the particulate matter was determined, but not the size of the anions.     

碳酸氢钠浸提-连续流动分析法测定园艺植物堆肥中的有效磷

为了解堆肥中有效磷供应状况,采用碳酸氢钠浸提-连续流动分析法测定园艺植物堆肥中有效磷的含量。通过对样品前处理条件、仪器参数进行优化,确定了提取时间45 min,料液比1∶60,吸样时间35 s,清洗时间60 s,去离子水作为基线液。标准曲线的线性关系良好,相关系数大于0.999,精密度好;检出限为0.008 mg/L;与手动法相比,连续流动分析法自动化程度高,而且对环境和人均友好。     

镍锗尖晶石扩散域高温蠕变性能的实验研究

利用人工合成的多晶材料研究了镍锗尖晶石在扩散域的高温蠕变性质。材料颗粒尺寸为0．5μm到8μm，压缩试件为圆柱状，使用气体介质围压试验机。常压蠕变试验过程中，围压为300MPa，温度为1123K到1523K，差应力在55－330MPa范围内。从实验结果得到的镍锗尖晶石在扩散域的流动律表明流动机制为颗粒边界的扩散蠕变（Coble蠕变）。将橄榄石和尖晶石的蠕变数据外推到地球内部条件，粗粒时尖晶石强度远大于橄榄石，粒度减小时，尖晶石比橄榄石还要弱。     

低浓度固液两相流的颗粒相动理学模型

用广义Fokker-Planck扩散模型描述液相湍动对颗粒的挟带作用，用修正的BGK模型描述粒间碰撞效应，建立了封闭的颗粒相PDF输运方程．运用Chapman-Enskog迭代法求得方程的二阶近似解，获得颗粒相脉动速度二阶矩和三阶矩闭合关系．模型与颗粒流模型相容，与液相湍流闭合模型是否相容依赖于扩散模型的具体形式，并据此比较了不同的涡一颗粒作用模型．模型与二维明渠流轻质沙和天然沙试验资料符合很好．表明细小粒径颗粒能够充分跟随水流运动；大粒径颗粒的相间平均速度差和壁面滑移速度明显，近壁区内的颗粒沿流向和垂向脉动强度都可能大于水流，并存在一定程度的颗粒碰撞效应．     

复杂边界条件下渗流场流线分布研究

流线分布研究已受到油藏工程师们的普遍关注。本文从无限大油藏稳态渗流场基本解出发,结合边界元方法求解出复杂边界条件下稳态渗流场的势分布,以此为基础提出了流线场的生成办法,并给出了应用实例。本文方法的优点在于求解过程中将问题的维数降低了一维,减少了计算量;计算精度较高且具有一定的普遍应用性;适应于求解任意形状的包括定压、定流量或混合边界在内的组合边界问题。实例表明,利用本文方法产生的流线分布因能够较为直观地反映出油藏流体在注采井间的运动轨迹,为优化井网和注入方案提供了重要依据。     

Flow properties of a dusty-gas point source in a supersonic free stream

By using Lagrangian method, the flow properties of a dusty-gas point source in a supersonic free stream were studied and the particle parameters in the near-symmetry-axis region were obtained . It is demonstrated that fairly inertial particles travel along oscillating and intersecting trajectories between the bow and termination shock waves . In this region, formation of " mufti- layer structure" in panicle distribution with alternating low- and high density layers is revealed. Moreover, sharp accumulation of particles occurs near the envelopes of particle trajectories .     

振动翼型和襟翼的绕流特性研究

用数值模拟手段详细地研究了振动翼型和襟翼的绕流问题,数值模拟的出发方程为Euler和N-S方程,格式为Bcam-Warming格式的改进型。数值实验主要针对流场的二大特性进行的,即振动对激波的影响和振动对分离的抑制作用,结果表明:(1)随翼型或襟翼的振动激波强度和位置也相应地变化但这一变化滞后于攻角的变化;(2)振幅加大激波强度的变化和激波运动范围也加大;(3)振动频率越高对激波的影响反而较低频时要小;(4)流动条件的不同可使升力回线的走向发生变化;(5)振动对分离有明显的抑制作用。     

How to predict viscous fingering in three component flow

In a WAG process (Water Alternate Gas), water and a miscible solvent (gas) are injected into a reservoir containing water and oil. The solvent will finger through the oil, leading to early breakthrough and poor recovery. Compared with a miscible flood, when only solvent is injected, fingering is supressed by the simultaneous injection of water, since this reduces the apparent mobility contrast between the injected and displaced fluids. The fingering in a miscible flood, with only hydrocarbon flowing, can be modelled successfully using a Todd and Longstaff fractional flow. In this paper, we demonstrate how to modify the effective Todd and Longstaff mobility ratio self-consistently to account for fingering in three component systems. The resultant empirical equations of flow are solved exactly in one dimension and are in excellent agreement with the averaged saturation and concentration profiles computed using two dimensional high resolution simulation, for a variety of injected water saturations, in both secondary and tertiary displacements.