Influence of the siliceous support structure on the coverage density of the chemically bonded phase

Two different types of silica support, viz. silica gel and porous glass, have been modified by mono- and difunctional octade-cylsilane. The resulting materials were characterized by physicochemical and chromatographic methods. Special attention was paid to the influence of the siliceous support structure and coverage density of chemically bonded phases on the retention data.     

以CBP为主体的高色纯度红色磷光有机电致发光器件

以铱配合物红色磷光体Ir(piq)2(acac)为掺杂剂,制备了基于CBP材料的一系列红色电致磷光器件(PLED),其结构为ITO/CuPC(1nm)/Ir(piq)2(acac):CBP(25nm)/BCP(10nm)/Alq3(35nm)/LiF(1nm)/Al(100nm),对4种不同的掺杂剂浓度进行了比较,研究了它们的电致发光特性。得出了Ir(piq)2(acac)的最佳掺杂比为8%,此时器件的色坐标都非常接近标准红色,且色纯度超过了98%以上;在16V时,色坐标为(x=0.67,y=0.32),色纯度为99.74%,基本满足了全色显示对红色发光的要求。     

Characterization of C18 chemically modified silica-gel and porous glass phases by high resolution solid state NMR spectroscopy and other physico-chemical methods

Summary Two types of packing materials, porous glass (PG) and silica gel (SG) have been modified by mono- and difunctional octadecylchlorosilane. The packing surfaces before and after chemical modification have been characterized by CP/MAS NMR, SIMS, porosimetrical, elemental and chromatographic methods. On the basis of the physico-chemical and chromatographic data the PG and SG (of similar porosity) used as supports of chemically bonded phases for RP HPLC, have been compared. Presented at 13th Symposium on Column Liquid Chromatography, Stockholm, June 25–30, 1989.     

CP/MAS NMR investigations of silica gel surfaces modified with aminopropylsilane

Summary Aminopropyl chemically bonded phases for high performance liquid chromatography (HPLC) have been prepared using mono- and trifunctional methoxyor ethoxysilanes. Three types of silica gel with different surface characteristics were used as support for the chemically bonded phases (CBPs). Surface characteristics of the packings before and after chemical modification were determined by porosity parameters, elemental analysis and CP/MAS NMR spectroscopy.²⁹Si and¹³C CP/MAS NMR investigations gave informations about different interactions between aminosilyl ligands and/or these ligands and/or water molecules condensed in the pores of the silica gel surface. With decreasing pore diameter of the silica gel the proportion of protonated aminopropyl ligand increases.     

Beyond the BET Family: Targeting CBP/p300 with 4‐Acyl Pyrroles

Bromodomain and extra‐terminal domain (BET) inhibitors are widely used both as chemical tools to study the biological role of their targets in living organisms and as candidates for drug development against several cancer variants and human disorders. However, non‐BET bromodomains such as those in p300 and CBP are less studied. XDM‐CBP is a highly potent and selective inhibitor for the bromodomains of CBP and p300 derived from a pan‐selective BET BRD‐binding fragment. Along with X‐ray crystal‐structure analysis and thermodynamic profiling, XDM‐CBP was used in screenings of several cancer cell lines in vitro to study its inhibitory potential on cancer cell proliferation. XDM‐CBP is demonstrated to be a potent and selective CBP/p300 inhibitor that acts on specific cancer cell lines, in particular malignant melanoma, breast cancer, and leukemia.     

Effect of Ir(pq)2acac doping on CBP in phosphorescence organic light-emitting diodes

Doping is one of the most powerful methods amongst the various performance improvement ways. Doping affects the energy levels of the host layer by the energy level of the dopant. This allows the energy bandgap to be adjusted to a desired level and thus generates light corresponding to that energy level. Alternatively, it can act as an energy barrier between the interfaces to change the flow of carriers. In this study, the voltage dependences of undoped and doped devices were observed. Bis(2-phenylquinoline) iridium(III) (acetylacetonate) (Ir(pq)₂acac) was doped in 4,4′-N, N′-dicarbazole-biphenyl (CBP) as the emission layer. The light intensity changes with the doping concentration, and the efficiency was also studied. When a high voltage was applied, the effect of triplet-triplet annihilation (TTA) adversely affected the electron-hole recombination. We analyzed the optimal operating conditions and the effect of doping concentration on OLEDs.     

半空间SH波方程非线性井间双参数反演

以半空间的ＳＨ波方程出发,采用Ｂｏｒｎ迭代法求解半空间弹性介质中密度和剪切模量分布的非线性反演问题。首先,采用矩量法和正则化方法,给出井间反演积分方程的离散形式,然后应用Ｂｒｏｎ迭代法求解非线性反演问题。     

Synthesis and Biological Evaluation of Spirocyclic Chromane Derivatives as a Potential Treatment of Prostate Cancer

As a significant co-activator involved in cell cycle and cell growth, differentiation and development, p300/CBP has shown extraordinary potential target in cancer therapy. Herein we designed new compounds from the lead compound A-485 based on molecular dynamic simulations. A series of new spirocyclic chroman derivatives was prepared, characterized and proven to be a potential treatment of prostate cancer. The most potent compound B16 inhibited the proliferation of enzalutamide-resistant 22Rv1 cells with an IC₅₀ value of 96 nM. Furthermore, compounds B16–P2 displayed favorable overall pharmacokinetic profiles, and better tumor growth inhibition than A-485 in an in vivo xenograft model.     

一种改善红光顶发射OLED色纯度及角度依赖特性的方法研究

在Si/SiO₂衬底上生长金属银作为阳极,4,4,4-tris(3-methylphenylpheny-lamino)-triphenylamine(m-MTDATA):MoOx/m-MTDATA/N,N-bis-(1-naphthyl)-N,N-diphenyl-1,1-biphenyl-4,4-diamine(NPB)作为空穴注入及传输层,发光层采用4,4-N,N-dicarbazole-biphenyl(CBP)掺杂磷光染料(1-(phenyl)isoquinoline)iridium(III) acetylanetonate(Ir(piq)₂(acac))的结构,4,7-di-phenyl-1,10-phenanthroline(BPhen)作为空穴阻挡层及电子传输层,阴极为LiF(1 nm)/Al(2 nm)/Ag(20 nm)复合阴极结构.通过在光取出的复合阴极上方生长一层CBP光学覆盖层,有效地改善了复合阴极膜系的透射率,从而改善了顶发射结构的光学耦合输出特性,在提高器件的正向发光效率的同时还使色坐标往深红光区移动.并且生长光学覆盖层结构的器件角度依赖特性明显得到改善,这对于制作高显示质量的显示器件具有重要意义.在原有结构的基础上增加20 nm的NPB掺杂磷光染料Ir(piq)₂(acac)作发光层,从而得到双发光层结构为NPB:Ir(piq)₂(acac)(1%,20 nm)/CBP:Ir(piq)₂(acac)(1%, 20 nm).由于NPB具有较高的空穴迁移率,避免了由于光学厚度的增加而引起器件工作电压的大幅升高,而双发光层的结构有利于增大激子复合区域,提高辐射复合几率,减少非辐射损耗,实现主客体之间高效的三线态能量传递,相对单发光层顶发射结构,双发光层结构不仅提高了器件的发光效率,而且改善了器件的色坐标.     

Bioseparation of recombinant cellulose-binding module-proteins by affinity adsorption on an ultra-high-capacity cellulosic adsorbent

Low-cost protein purification methods are in high demand for mass production of low-selling price enzymes that play an important role in the upcoming bioeconomy. A simple protein purification method was developed based on affinity adsorption of a cellulose-binding module-tagged protein on regenerated amorphous cellulose (RAC) followed by modest desorption. The biodegradable cellulosic adsorbent RAC had a very high protein-binding capacity of up to 365 mg of protein per gram of RAC. The specifically-bound CBM-protein on the external surface of RAC was eluted efficiently by ethyl glycol or glycerol. This protein separation method can be scaled up easily because it is based on simple solid/liquid unit operations. Five recombinant proteins (CBM-protein), regardless of intercellular or periplasmic form, were purified successfully for demonstration purpose.