颗粒材料三维应力路径下的接触组构特性

颗粒材料的宏观应力变形特征与其微观接触力、组构等紧密相关.一般而言,强接触系统属于颗粒内部体系的传力结构,其对应的组构张量是影响宏观应力性质的重要因素.细观数值方法(如离散单元法)能够反映物理试验的基本规律,并且可以方便地提取宏微观数据来研究颗粒体系的应力变形机制.采用离散单元法(discrete element method,DEM)进行一系列等$p$等$b$应力路径下颗粒材料的真三轴试验,在此基础上研究了三维应力路径下颗粒材料的宏微观力学参数的演化过程、三维组构张量与应力张量多重联系以及强接触体系反映的宏观应力特征.研究表明:颗粒体系偏应力峰值状态和临界状态均存在与加载路径无关的宏微观特征;三维应力路径下组构张量与应力张量存在非共轴性,但其联合不变量演化过程表现出加载路径无关的特征;与弱接触系统的组构张量相比,强接触系统的组构张量更能反映宏观应力张量的特征;强弱接触体系的组构张量对颗粒体系宏观响应的贡献不同,其分界点存在一定取值范围,但采用平均接触力较为简单合理.      

Viscoelastic materials with a double porosity structure

This paper in concerned with the linear theory of materials with memory that possess a double porosity structure. First, the formulation of the initial-boundary-value problem is presented. Then, a uniqueness result is established. The semigroup theory of linear operators is used to prove existence and continuous dependence of solutions. A minimum principle for the dynamical theory is also derived.     

EFFECTIVE ELASTIC MODULUS OF BONE-LIKE HIERARCHICAL MATERIALS

A shear-lag model is used to study the mechanical properties of bone-like hierarchical materials.The relationship between the overall effective modulus and the number of hierarchy level is obtained.The result is compared with that based on the tension-shear chain model and finite element simulation,respectively.It is shown that all three models can be used to describe the mechanical behavior of the hierarchical material when the number of hierarchy levels is small.By increasing the number of hierarchy level,the shear-lag result is consistent with the finite element result.However the tension-shear chain model leads to an opposite trend.The transition point position depends on the fraction of hard phase,aspect ratio and modulus ratio of hard phase to soft phase.Further discussion is performed on the flaw tolerance size and strength of hierarchical materials based on the shear-lag analysis.     

THE RATE-INDEPENDENT CONSTITUTIVE MODELING FOR POROUS AND MULTI-PHASE NANOCRYSTALLINE MATERIAL

To determine the time-independent constitutive modeling for porous and multiphase nanocrystalline materials and understand the effects of grain size and porosity on their mechanical behavior, each phase was treated as a mixture of grain interior and grain boundary, and pores were taken as a single phase, then Budiansky's self-consistent method was used to calculate the Young's modulus of porous, possible multi-phase, nanocrystalline materials, the prediction being in good agreement with the results in the literature. Further, the established method is extended tosimulate the constitutive relations of porous and possible multi-phase nanocrystalline materials with small plastic deformation in conjunction with the secant-moduli approach and iso-strain assumption. Comparisons between the experimental grain size and porosity dependent mechanical data and the corresponding predictions using the established model show that it appears to be capable of describing the time-independent mechanical behaviors for porous and multi-phase nanocrystalline materials in a small plastic strain range. Further discussion on the modification factor, the advantages and limitations of the model developed were present.     

高比表面积活性炭的制备及其储氢性能的研究进展

简要分析各种储氢材料和技术的基础上,重点介绍了高比表面积活性炭的制备方法,目前最常用的活化方法是以氢氧化钾为活化剂的化学活化法;并总结了近年来前人在高比表面积活性炭储氢方面的研究结果,同时简要分析了高比表面积活性炭储氢机理方面的研究进展.     

溶胶-凝胶法制备丙烯酸树脂/TiO2有机-无机杂化材料及其结构表征

通过预水解的二氧化钛(TiO2 )溶胶与丙烯酸树脂共混或原位聚合的方法制备了均匀透明的丙烯酸树脂 TiO2 有机 无机杂化材料.考察了TiO2 溶胶制备方法、聚合物中—COOH官能团含量和杂化材料制备方法对杂化材料结构的影响.索氏抽提实验表明聚合物中的羧酸官能团和无机TiO2 相间发生了交联反应,且随着—COOH官能团含量的增加,交联程度增大.小角X射线散射(SAXS)结果发现,杂化材料中TiO2 为疏松的三维网状结构,且在纳米尺度范围内,但这种三维网状结构随着TiO2 溶胶制备中水或酸的用量增加,其致密度增加,尺寸增大.同原位聚合法相比,共混法可制备出更均匀的杂化体系,且TiO2 为单分散.     

Preparative high-speed counter-current chromatography for purification of shikonin from the Chinese medicinal plant Lithospermum erythrorhizon

The bioactive compound shikonin was successfully isolated and purified from the crude extract of the traditional Chinese medicinal plant Lithospermum erythrorhizon Sieb. et Zucc. by preparative high-speed counter-current chromatography (HSCCC). The preparative HSCCC was performed using a two-phase solvent system composed of n-hexane-ethylacetate-ethanol-water (16:14:14:5 (v/v)). A total amount of 19.6 mg of shikonin at 98.9% purity was obtained from 52 mg of the crude extract (containing 38.9% shikonin) with 96.9% recovery. The preparative isolation and purification of shikonin by HSCCC was completed in 200 min in a one-step separation.     

有机噻吩类衍生物作为电致变色材料*

噻吩类衍生物包括聚噻吩衍生物和齐聚噻吩衍生物。本文从有目的地设计、合成噻吩类衍生物的角度出发,探索了其作为电致变色材料的应用,综述了噻吩类衍生物作为电致变色材料的最新研究进展。