Analysis of microcystins by capillary zone electrophoresis coupling with electrospray ionization mass spectrometry

In this paper, a rapid and effective method based on capillary zone electrophoresis (CZE) coupled with electrospray ionization mass spectrometry (ESI-MS) was established for the trace analysis of microcystin (MC) isomers in crude algae sample. The experimental conditions including the composition, acidity and concentration of buffer, separation voltage, injection time, and MS detection parameters were investigated in detail. A capillary separation system was as follows: a uncoated fused-silica capillary tube (50 μm i.d. × 90 cm), 40 mmol L⁻¹ ammonium acetate solution (pH 9.86) as running buffer, 25 kV as separation voltage, 20 kV × 3 s water first and 20 kV × 20 s for sample injection. Mass analysis was performed in ESI source, with sheath gas temperature 150 °C, sheath gas pressure 10 psi, and sheath gas flow 6 L min⁻¹. And sheath liquid was 7.5 mmol L⁻¹ acetic acid in 50% isopropanol-water (3 μL min⁻¹). Protonation and ammonium adduct molecular ions m/z 506.9 (MC-LR) and 532.0 (MC-YR) were used for the quantification of MCs. Under these conditions, two MCs were baseline separated within 9 min, the calibration curves were obtained in the range of 0.11-10.0 μg mL⁻¹ and 0.16-10.5 μg mL⁻¹ for MC-LR and MC-YR, respectively. Meanwhile, limits of detection were 0.05 and 0.08 μg mL⁻¹ for MC-LR and MC-YR, respectively. The recoveries for the two MCs were in the range of 95.8-108%. The developed approach had been successfully applied to the analysis of MCs in crude algae samples.     

色谱法测定催化剂中碳含量操作条件研究

根据燃烧-色谱法的原理建立了催化剂碳含量的测定方法并开发了催化剂高温定碳仪,通过考察燃烧温度、载气流速、桥流等对催化剂碳含量测定的影响,确定了测定催化剂碳含量的最佳操作条件。实验结果表明,在确定的最佳操作条件下,测定的催化剂碳含量与化学法基本相同。     

高分子共混物剪切流动的研究 Ⅱ.动力学及其它研究方法

文章是《高分子共混物剪切流动的研究Ⅰ.研究概况及热力学方法》的续篇,介绍高分子共混物剪切流动的研究进展,涉及动力学、散射光和数值模拟等三种研究方法。     

Open tubular capillary electrochromatography: A useful microreactor for collagen I glycation and interaction studies with low-density lipoprotein particles

Diabetes, a multifunctional disease and a major cause of morbidity and mortality in the industrialized countries, strongly associates with the development and progression of atherosclerosis. One of the consequences of high level of glucose in the blood circulation is glycation of long-lived proteins, such as collagen I, the most abundant component of the extracellular matrix (ECM) in the arterial wall. Glycation is a long-lasting process that involves the reaction between a carbonyl group of the sugar and an amino group of the protein, usually a lysine residue. This reaction generates an Amadori product that may evolve in advanced glycation end products (AGEs). AGEs, as reactive molecules, can provoke cross-linking of collagen I fibrils. Since binding of low-density lipoproteins (LDLs) to the ECM of the inner layer of the arterial wall, the intima, has been implicated to be involved in the onset of the development of an atherosclerotic plaque, collagen modifications, which can affect the affinity of native and oxidized LDL for collagen I, can promote the entrapment of LDLs in the intima and accelerate the progression of atherosclerosis.In this study, open tubular capillary electrochromatography is proposed as a new microreactor to study in situ glycation of collagen I. The kinetics of glycation was first investigated in a fused silica collagen I-coated capillary. Dimethyl sulphoxide, injected as an electroosmotic flow marker, gave information about the charge of coating. Native and oxidized LDL, and selected peptide fragments from apolipoprotein B-100, the protein covering LDL particles, were injected as marker compounds to clarify the interactions between LDLs and the glycated collagen I coating. The method proposed is simple and inexpensive, since only small amounts of collagen and LDL are required. Atomic force microscopy images complemented our studies, highlighting the difference between unmodified and glycated collagen I surfaces.     

Rapid Multiphase Flow Dynamics Mapped by Single‐Shot MRI Velocimetry

A new, fast magnetic resonance imaging (MRI) method is described and applied to map flow fields in systems with internal velocities rapidly varying along the streamlines. While conventional MRI techniques encode the velocity information in a preparatory period prior to the imaging acquisition module, our technique repeatedly refreshes the velocity encoding during a single‐shot imaging sequence. In this way, the maximum acceleration responsible for velocity variation of the molecules is increased by up to two orders of magnitude compared to standard procedures. Besides being compatible with high acceleration, this pulse sequence is suited to acquiring in a single scan the multiple velocity images required to construct a full velocity vector map. The power of this new methodology is demonstrated by following the internal dynamics of toluene droplets levitating in a counterflow of water during mass transfer of acetone from the water phase into the drop in the presence of surface‐active impurities. The dramatic reduction in measurement time allows visualization for the first time of the important impact of even small concentrations of acetone on accumulation of surfactants at the drop’s surface.     

Characterization of bacterial lipid profiles by using rapid sample preparation and fast comprehensive two‐dimensional gas chromatography in combination with mass spectrometry

The bacteria fatty acid profile has been extensively studied for taxonomic classification purposes, since bacteria, in general, contain particular and rare fatty acids, compared with animal and plant tissues. As for any real‐world sample type, the development of rapid and reliable methods for (i) sample identification (in this case, bacterium type), and (ii) constituent identification (in this instance, the fatty acid profile) is desirable. In this research, a half‐an‐hour procedure, to analyze bacteria, was developed: a 2‐min one‐step sample preparation step was followed by a relatively fast comprehensive 2D GC‐MS separation (25 min). Furthermore, dedicated MS libraries were constructed for the identification of bacteria and fatty acids. Finally, data processing, only qualitative at this stage, was carried out with the support of a novel comprehensive 2D GC software.     

Similarities and Differences of the Active Sites in Basic and Advanced MgCl2‐Supported Ziegler‐Natta Propylene Polymerization Catalysts

Though preparation procedures of heterogeneous Ziegler‐Natta catalysts for propylene polymerization are sophisticated, it is uncertain whether the nature of the active sites is similar or different for different preparation procedures. In this study, the effects of preparation procedures on the nature of the active sites were investigated by stopped‐flow polymerization in combination with microstructure analysis of polymers. Both basic and advanced types of catalysts showed the same two kinds of isospecific active site, which indicated little influence of the preparation method on the active site structure. On the contrary, the ratios of the two kinds of isospecific sites were not the same, resulting in variation of average polymer properties.

     

载气流速对高场不对称波形离子迁移谱的影响

载气流速是影响高场不对称波形离子迁移谱(FAIMS)的重要参数.以自制的高场不对称波形离子迁移谱仪为实验平台,在射频电场幅值3 kV/cm,频率500 kHz,占空比0.36的条件下,研究了载气流速对苯离子迁移谱谱峰强度和半峰宽的影响.实验结果表明: 载气流速为3.7 L/min时,苯样品的谱峰强度最大,仪器的灵敏度最高.随着载气流速的增加,谱峰半峰宽变宽,仪器的分辨率下降.载气流速为3 .0～3.7 L/min时仪器综合性能最佳.此结果对于控制迁移谱仪载气流速有重要的参考意义.     

Analysis of trace degradation products (decarboxylated diastereoisomers) of S-adenosylmethionine by electrophoresis in capillaries with cationic coatings (N-methylpolyvinylpyridinium or divalent barium)

Commercial preparations of S‐adenosylmethionine (SAM) when analyzed in uncoated capillaries show a minute impurity believed to be decarboxylated (dc) SAM. By using two types of cationic coatings, thus reducing the electro‐endo‐osmotic flow (EOF), it was possible to separate this impurity into two diastereoisomers of dcSAM. The coatings evaluated for this purpose were: (i) N‐methylpolyvinylpyridinium, used under reversed EOF at acidic conditions (pH 4.0) and (ii) deposition of divalent barium at alkaline pH values (pH 9.4), providing reduced EOF. Under these conditions, it was possible to separate this impurity into two diastereoisomers, which by chemical synthesis were indeed proven to be dcSAM. It was further demonstrated that, in the alkylation of 5′‐methylthioadenosine by 3‐bromopropylamine in bromidric acid to dcSAM, another minute impurity was present, proven, via mass spectrometry, to consist of S‐(5′‐adenosyl)‐3‐thiopropylamine (decarboxylated and demethylated (dc‐SAH)). The LOD for the two dcSAM diastereoisomers was assessed as 17.5 μg/mL and their LOQ as 25.5 μg/mL. By the barium‐based protocol it was possible to quantify the dcSAM, present in a commercial sample of SAM, as a 0.1% impurity.