Dioscin-Mediated Autophagy Alleviates MPP+-Induced Neuronal Degeneration: An In Vitro Parkinson’s Disease Model

Autophagy is a cellular homeostatic process by which cells degrade and recycle their malfunctioned contents, and impairment in this process could lead to Parkinson’s disease (PD) pathogenesis. Dioscin, a steroidal saponin, has induced autophagy in several cell lines and animal models. The role of dioscin-mediated autophagy in PD remains to be investigated. Therefore, this study aims to investigate the hypothesis that dioscin-regulated autophagy and autophagy-related (ATG) proteins could protect neuronal cells in PD via reducing apoptosis and enhancing neurogenesis. In this study, the 1-methyl-4-phenylpyridinium ion (MPP⁺) was used to induce neurotoxicity and impair autophagic flux in a human neuroblastoma cell line (SH-SY5Y). The result showed that dioscin pre-treatment counters MPP⁺-mediated autophagic flux impairment and alleviates MPP⁺-induced apoptosis by downregulating activated caspase-3 and BCL2 associated X, apoptosis regulator (Bax) expression while increasing B-cell lymphoma 2 (Bcl-2) expression. In addition, dioscin pre-treatment was found to increase neurotrophic factors and tyrosine hydroxylase expression, suggesting that dioscin could ameliorate MPP⁺-induced degeneration in dopaminergic neurons and benefit the PD model. To conclude, we showed dioscin’s neuroprotective activity in neuronal SH-SY5Y cells might be partly related to its autophagy induction and suppression of the mitochondrial apoptosis pathway.     

Spin Transport in a Rashba Ring-Quantum Dot System Pumped by Microwave Fields

We report a theoretical study on producing electrically spin-polarized current in the Rashba ring with parallel double dots embedded, which are subject to two time-dependent microwave fields. By means of the Keldysh Green's function method, we present an analytic result of the pumped current at adiabatic limit and demonstrate that the interplay between the quantum pumping effectand spin-dependent quantum interference can lead to an arbitrarily controllable spin-polarized current in the device. The magnitude and direction of the charge and spin current can be effectively modulated by system parameters such as the pumping phase difference, Rashba precession phase, and the dynamic phase difference of electron traveling in two arms of ring; moreover, thespin-polarization degree of the charge current can also be tuned in the range [-∞, +∞]. Our findings may shed light on the all-electric way to produce the controllable spin-polarized charge current in the field of spintronics.     

辐射在CH泡沫中传输的数值模拟

利用一维多群辐射输运程序对辐射在CH泡沫中的传输过程进行了数值模拟,给出一些细致的物理图像和定量结果。在一定的入射辐射流条件下,密度变化对辐射传输特征、辐射加热介质的热力学平衡弛豫过程有重要影响。随着密度下降,辐射由亚声速传输转变为超声速传输,辐射在传输过程中的能谱形状也不同。     

利用“神光-Ⅱ”激光装置多路光束叠加直接驱动下的冲击波平面性及稳定性

利用“神光-Ⅱ”的3路基频光输出及小透镜列阵束匀滑技术,通过优化设计和合理地选择光路组合,实现了多路叠加斜入射的驱动激光, 在靶材料中产生一个650~750μm范围内平面性良好的冲击波,有效地提高了“神光-Ⅱ”输出光束的利用率。同时,利用斜面靶进行的冲击稳定性实验表明,在靶面功率密度分别为3.26×1014及2.56×1014W/cm2时,冲击波至少在28.38~55.82和22.13~35.07μm的Al样品厚度内是稳定传播的。     

过模慢波结构频率反射特性及谐振腔的影响

利用有限元方法求解:S-参数矩阵,研究了过模慢波结构对圆波导TM01,TM02模的反射特性,分析了在慢波结构末端加入谐振腔后,由于两端口的不对称性而造成的对反射特性影响。结果表明,在TM01的π模频率附近,慢波结构和谐振腔组成的系统对无谐振腔一侧端口入射TM01模的反射增大,而对有谐振腔一侧端口入射TM01模的反射减小。根据计算结果,解释了普通多波切伦柯夫振荡器所用慢波结构周期数较多的原因,说明了在多波切伦柯夫振荡器中引入谐振腔后,不但可以减少所用慢波结构周期数,而且有利于提高微波输出效率。     

马克思的制度经济思想再认识

在当代经济学的语境下,本文从一种广义的制度分析新视角,首次重新解读了马克思（以及恩格斯）著作中的制度经济论述。通过深入细致的思想梳理、观点辨析、理论提炼与重构工作发现,马克思的经济学是经济思想史上第一个重要的制度经济学分析体系。这一分析体系既包含有关社会经济制度问题的基本概念与原理的“一般性分析”,也包括关于资本主义市场经济制度的历史特性的“专门性分析”。两个分析层次之间具有内在的逻辑联系,反映了从“一般”到“特殊”的创新性理论演绎思路。对马克思的制度经济学分析体系的重新发掘与提炼表明,马克思的制度经济思想不仅在制度经济思想史上占具至关重要的地位,而且对于丰富和推进当代制度经济理论发展也具有重要的学术启示与借鉴意义。     

Air Flow Computation around an Automated Guided Vehicle

An upwind finite element scheme for the incompressible viscous flow at a high Reynolds number was proposed by the fourth and fifth authors. The scheme has the potential to approximate the advection term in third-order accuracy. We apply it to a two-dimensional non-stationary analysis of airflows around an Automated Guided Vehicle (AGV), which starts with constant acceleration, runs at a constant speed and stops with constant deceleration. The results are at least qualitatively good and compatible with experimental ones.     

Effect of long-period stacking ordered phase on thermal stability of refined grains in Mg-RE-based alloys

The refined grains in both as-cast Mg-10Y-1Zn-2Zr (WZ101?K, wt.%) and Mg-10Y-1Al (WA101, wt.%) alloys have been found to have superior thermal stability after solution treatment. Plate-shaped, but different polytypes of long-period stacking ordered (LPSO) phases distributed along grain boundaries are considered as the predominant inhibitors of grain growth. Based on the plate-shaped features of the LPSO phases, a modified Zener’s model is established and the predicted limiting grain sizes are in a good agreement with the experimental results. Therefore, this model has strong potential for designing advanced Mg-RE-based alloys with high strength and high creep resistance at high temperatures.     

Poly(amidoamine)s: Past,present, and perspectives

Poly(amidoamine)s (PAAs) are a family of synthetic polymers obtained by stepwise polyaddition of prim‐ or sec‐amines to bisacrylamides. Nearly all conceivable bisacrylamides and prim‐ or sec‐amines can be employed as monomers endowing PAAs of a structural versatility nearly unique among stepwise polyaddition polymers. PAAs are degradable in aqueous media, including physiological fluids. Many of them are remarkably biocompatible notwithstanding their cationic character. PAAs are per se highly functional polymers and, in addition, can be further functionalized giving rise to an endless variety of polymeric structures meeting the requisites for applications in such apparently disparate fields as inorganic water pollutants scavengers, sensors, drug and protein intracellular carriers, transfection promoters, peptidomimetic antiviral and antimalarial agents. In this review, the unique chemistry of PAAs is discussed and a vast library of PAA structures and PAA applications from the beginning to the present days reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2319–2353