高密度聚乙烯／超高分子量聚乙烯共混物高取向薄膜形态结构与力学性能的研究

高密度聚乙烯／超高分子量聚乙烯共混物高取向薄膜形态结构与力学性能的研究张伟广，赵勇，杨德才中国科学院长春应用化学研究所，高分子物理开放实验室，长春，１３００２２）关键词ＨＤＰＥ、ＵＨＭＷＰＥ、共混物、形态结构、力学性能如何提高高分子材料抗张强度和模量...     

尼龙6与半芳香性非晶尼龙原位共混物的结构与性能

一种半芳香的非晶尼龙共聚物溶解于熔融的己内酰胺中,引发后者负离子开环聚合原位制备尼龙6与非晶尼龙的共混物.与纯尼龙6相比较,此原位共混物的强度与模量显著提高.非晶区呈现单一的玻璃化转变,表明共混物为均相体系,其组分的相容性源于负离子聚合过程中链交换反应引起的共聚.与纯尼龙6相比较,此共混物的熔点与结晶度显著降低.此外,与纯尼龙6只存在α晶不同,共混物中伴生有大量的γ晶.当非晶尼龙含量为20 wt%时,绝大部分晶体为γ晶.然而,共混物中球晶仅有一定程度细化.共混物强度和模量的提高被认为主要源于非晶区分子活动能力降低以及γ晶相对含量的提高.     

COMPATIBILITY AND PHASE BEHAVIOR OF PS/SBR BLEND Ⅰ. EFFECT OF MOLECULAR WEIGHT OF PS

The results of this study reveals not only the sensitivity of the compatibility of PS with SBR to the molecular weight (MW) of PS and temperature, but also some other interesting characteristics, i. e., unusual morphology change during the process of mixing with increase in temperature of specimen preparation observed under optical microscope and double-peak UCST curves for three blends with PS of low MW from DSC data. Acording to the amount of inward shift of the component T_g's and the broadening of the transition regions, it may be said that this polymer pair is compatible only when the MW of PS is low, and even then there still exists micro-heterogeneity.     

结晶聚合物品相相容性的研究

通过ＤＳＣ、Ｘ－射线衍射、红外光谱及拉伸试验研究了ＨＤＰＥ与ＬＬＤＰＥ、ＨＤＰＥ与ＬＤＰＥ之间的晶相相容性．结果表明，链结构相近的ＨＤＰＥ和ＬＬＤＰＥ的晶相相容性好，能形成共晶；而链结构差异较大的ＨＤＰＥ和ＬＤＰＥ的晶相相容性较差，倾向于分别结晶，但有部分链段被对方的晶区夹持．不论是支化度大的ＬＤＰＥ链段插入以ＨＤＰＥ为主的晶区，还是支化度小的ＨＤＰＥ链段插入以ＬＤＰＥ为主的晶区，都可破坏晶区的规整性．共晶的形成使共混物的熔点、结晶度、晶粒体积等低于两组份的线性加和，而力学性能，尤其是断裂伸长率，则显著提高，呈协同效应．     

热致液晶共聚酯／Nylon－1010共混物的研究

利用偏光显微镜（ＰＬＭ），差示扫描量热计及广角Ｘ－射线衍射等手段研究了热致液晶共聚酯／Ｎｙｌｏｎ－１０１０共混体系．发现当热致液晶共聚酯（ＨＴＨ１０）含量达到３０％时共混物微结构与纯ＨＴＨ１０相似．尼龙－１０１０的结晶度先是随ＨＴＨ１０含量增加而增加，随后又随之下降，但其结晶温度却随ＨＴＨ１０加入而单调下降，共混物的熔融热焓△Ｈｍ在ＨＴＨ１０含量为３０％时与计算值有较大的偏差，广角Ｘ－射线衍射结果表明，此时共混物结构发生了较为明显的变化，两组份之间在此时存在一定的相互作用．     

Blends of propylene-ran-ethylene and propylene-ran-(1-butene) copolymers: Crystal superstructure and mechanical properties

Blends of isotactic propylene-ran-ethylene (EP) and propylene-ran-(1-butene) (BP) copolymers with various comonomer content (2-3.1 wt.% ethylene, 9.9 wt.% 1-butene), were prepared in Brabender internal mixer at various compositions (25/75, 50/50, 75/25). Static, impact and dynamic mechanical behavior of copolymers and their blends was investigated. The crystalline structure was studied by DSC and SAXS analysis. For all copolymers the lamellar thickness, crystallinity degree and glass transition temperature are lower than those of iPP homopolymer, depending on the comonomer content. It was found that the copolymers exhibit improved impact strength as compared to plain iPP, due to lower crystallinity and higher mobility of chains within amorphous component. Moreover, the elastic modulus as well as the yield behavior of the examined samples resulted to depend primarily on the amount of the crystalline phase and the thickness of the lamellar crystals, respectively. A linear dependence of yield stress on the logarithm of reciprocal lamellar thickness was observed for blends and copolymers, supporting the concept of thermal nucleation of dislocations which control the crystallographic slip processes initiated at the yield point. The blends of BPS with either EPS or EP2 display complete miscibility in the entire range of composition and their mechanical properties are intermediate between those of plain components, changing gradually with the composition.     

苯并唑类共聚物与共混物的能量转移与激子空间限制研究

通过3-氨基-4-羟基苯甲酸盐酸盐(AHBAH),2,5-二氨基-1,4-苯硫醇盐酸盐(DABDT)和2,5-噻吩二羧酸(TDA)在多聚磷酸中缩聚,合成了一系列不同组成的高、低带隙无规共聚物聚(2,5-苯并噁唑)-co-聚(2,5-噻吩基苯并二噻唑)(ABPBO-co-PBZTT),并制备了一系列由ABPBO和PBZTT组成的共混物.通过紫外-可见吸收光谱、光致荧光光谱研究了聚合物不同组成和结构变化对光物理性能的影响.随着共聚物中PBZTT含量的增加,共聚物的发射波长红移,并发生了明显的ABPBO结构吸收能量向PBZTT转移的现象,共聚物膜的量子效率比纯PBZTT膜的量子效率有明显提高.共混物虽然也发生了能量转移现象,但其更易于形成集聚体,量子效率与纯的PBZTT聚合物相比,并没有明显提高.     

Effect of PEG on the crystallization of PPDO/PEG blends

A new biodegradable polymer system, poly(p-dioxanone) (PPDO)/poly(ethylene glycol) (PEG) blend was prepared by a solvent casting method using chloroform as a co-solvent. The PPDO/PEG blends have different weight ratios of 95/5, 90/10, 80/20 and 70/30. Crystallization of homopolymers and blends were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). When 5% of PEG was blended, the crystallization exothermal peaks (T_c) of PPDO increased sharply and the crystallization exothermal peaks (T_c) of PEG decreased slightly compared with the homopolymers. The crystallization rates of both components increased, and caused greater relative crystallization degree (X_t%). But when the content of PEG was more than 5%, the crystalline behaviors of blends had no more significant changes accordingly. The melting points of each sample varied little over the entire composition range in this study. The nonisothermal crystallization of PPDO homopolymer and blend (PPDO/PEG = 70/30) were also studied by DSC. The crystallization began at a higher temperature when the cooling rates were slower. The nonisothermal crystallization kinetics of blends was analyzed by Ozawa equation. The results showed that the Ozawa equation failed to describe the whole crystallization of the blend, but Mo equation could depict the nonisothermal crystallization perfectly.     

聚甲基丙烯酸甲酯－聚四氢呋喃两嵌段共聚物／聚四氢呋喃共混体系的相容性和结晶行为

报道了对嵌段共聚物结晶型共混体系结晶行为的研究．通过对聚甲基丙烯酸甲酯－聚四氢呋喃两嵌段共聚物／聚四氢呋喃共混体系的研究，我们发现１．微相分离结构的存在，可使相容的这类体系形成多种特殊的结晶形态；２．共混体系的相容性可以方便地由其结晶行为来判断；３．共混体系中共聚物的结晶能力显著提高．这些特点都明显不同于一般的聚合物共混体系．     

PVC/PBD-b-PMMA共混体系相容性的研究

采用ＤＭＡ和ＴＥＭ系统研究了聚丁二烯－聚甲基丙烯酸甲酯的嵌段共聚物（ＰＢＤ－ｂ－ＰＭＭＡ）与聚氯乙烯（ＰＶＣ）共混体系的相容性问题。结果表明：ＰＶＣ／ＰＢＤ－ｂ－ＰＭＭＡ共混体系具有部分相溶性。相容的程度与共混体系的组成、组分聚合物的分子量以及共聚物中ＰＢＤ和ＰＭＭＡ嵌段的比例密切相关。