Time‐resolved Fourier transform infrared/attenuated total reflection spectroscopy for the measurement of molecular diffusion in polymers

Over the past 2 decades, the use of time‐resolved Fourier transform infrared/attenuated total reflection (ATR) spectroscopy for the measurement of diffusion in polymers has grown. ATR is a powerful technique for the measurement of diffusion in polymers because it is an in situ technique that is relatively inexpensive, provides reliable short‐time data, and provides a wealth of information at the molecular level. This article highlights the technique and its application to numerous studies, ranging from the diffusion of drugs in human skin to chemical warfare agents in barrier materials. In addition to these topics, recent studies with ATR to quantify and model molecular interactions during the diffusion process are reviewed. In the future, the ATR technique may have an impact on a variety of emerging fields in which diffusion in polymers plays an important role, such as fuel cells, membrane separation, sensors, and drug delivery. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2794–2807, 2003     

Antifouling ultrafiltration membrane composed of polyethersulfone and sulfobetaine copolymer

A new random copolymer was synthesized by reacting hydrophilic N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) (DMMSA) with hydrophobic butyl methacrylate (BMA) through a conventional radical polymerization. The as-prepared sulfobetaine copolymer (DMMSA–BMA) was blended with polyethersulfone (PES) to fabricate antifouling ultrafiltration membrane for BSA separation. The X-ray photoelectron spectroscopy analysis of blend membranes revealed concentration of sulfobetaine groups at the membrane surfaces that endowed the membrane with higher hydrophilicity and better antifouling property. For the membrane with 8.0 wt% DMMSA–BMA copolymer concentration (No. 5), irreversible fouling has been considerably reduced and the flux recovery rate of the blend membrane reached as high as 82.8%. Furthermore, the blend membrane could effectively resist BSA fouling in a wide pH range from 4.0 to 8.0.     

Quantitative determination of paraffin oil in blood by capillary gas chromatography

A capillary gas chromatographic method is described for the quantitative determination of liquid paraffin in blood. Paraffin is extracted from blood into n-heptane. After solvent evaporation and dissolution of the residue in 100–200 μl n-heptane one μl is injected into a gas chromatograph fitted with a fused silica capillary column (Permabond® OV-1-CB-0.1, 10 m × 0.32 mm i.d.) and flame ionization detector. Analysis is performed by using an oven program [50°C (3 min)?285°C (5 min), rise 10%min]. The sensitivity (1.5 ng hexadecane) and the reproducibility prove the applicability of the method for the determination of liquid paraffin in blood and for the study of the stability of the liquid paraffin hollow fiber membranes used in an extracorporeal liver support system.     

The melt hollow fiber spinning process: steady-state behavior,sensitivity and stability

The rheology of the melt hollow fiber spinning process is examined in the thin filament limit. The resulting thin filament equations are also applicable to single-phase and two-phase extensional flows. Using a novel numerical solution procedure, the sensitivity of the fiber spinning equations to material property and process variations is investigated. Fiber geometry is directly controlled by the mass flowrates of the core and clad fluids while the spinline tension is most strongly influenced by clad viscosity. A maximum can occur in the clad stress profile if a core liquid is used and the ratio of core to clad viscosity increases greatly with temperature. Isothermal spinning of high viscosity clad liquids with either a core gas or liquid is unstable for draw ratios greater than 20.2 as found for solid fibers.     

Determining moisture absorption/desorption properties of commercial membranes by thermogravimetry (TG)

A series of different commercial membranes were characterized by their moisture absorption and desorption properties under controlled humidity and temperature conditions. This work was made possible by combining the features of a constant humidity conditioning chamber with those of a thermogravimetric (TG) apparatus. These two modules were interconnected by tubing, rotameters, an atmosphere-recycling microbellows pump and switching valves. Under programmed heating and isothermal conditions reproducible data were obtained in terms of weight-gain or weight-lossvs. time and pore size. Evaluation of the resulting TG curves allowed us to report reasonable differences in the materials, some of which had been previously surface-modified by the manufacturer.     

The cell-penetrating peptide TAT(48-60) induces a non-lamellar phase in DMPC membranes.

Cell-penetrating peptides (CPPs) are short polycationic sequences that can translocate into cells without disintegrating the plasma membrane. CPPs are useful tools for delivering cargo, but their molecular mechanism of crossing the lipid bilayer remains unclear. Here we study the interaction of the HIV-derived CPP TAT (48-60) with model membranes by solid-state NMR spectroscopy and electron microscopy. The peptide induces a pronounced isotropic (31)P NMR signal in zwitterionic DMPC, but not in anionic DMPG bilayers. Octaarginine and to a lesser extent octalysine have the same effect, in contrast to other cationic amphiphilic membrane-active peptides. The observed non-lamellar lipid morphology is attributed to specific interactions of polycationic peptides with phosphocholine head groups, rather than to electrostatic interactions. Freeze-fracture electron microscopy indicates that TAT(48-60) induces the formation of rodlike, presumably inverted micelles in DMPC, which may represent intermediates during the translocation across eukaryotic membranes.     

Sol-Gel Routes to Zeolite Membranes and Thin Films

The synthesis of zeolite membranes and thin films using the secondary growth process is briefly described. In this process colloidal zeolite particles (sols) are prepared hydrothermally and then subsequently deposited on substrates to produce uniform layers of controlled thickness, as illustrated with silicalite and zeolite-A. The formation and growth of the zeolite sols has been investigated in situ by small angle neutron scattering (SANS). SANS measurements on silicalite sols at progressively higher concentrations have provided details of the colloid interactions which lead to zeolite gel-layer structures which are uniform and free of defects.     

Preparation of lucifer yellow fluorescent liposomes: A method for cells' membrane labeling

This report describes a method to conjugate lucifer yellow to the external surface of liposomes. The heterobifunctional cross-linking reagentN-succinimidyl 3-(2-pyridyldithio)propionate has been used to activate DMPE molecules. The DMPE-dithiopyridine product has been mixed with DMPC to prepare liposome vesicles. These have been reduced by DTT and finally reacted with lucifer yellow-iodoacetamide to produce the fluorescence-labeled vesicles. The quenching of their fluorescence intensity by Kl is consistent with fully exposed fluorophores. The decay of the fluorescence intensity of the lipid-bound lucifer yellow is biexponential (₁=7.9 ns; ₂=1.1 ns), with a relative yield of 0.16. When the fluorescent liposomes are mixed with cells, the lucifer yellow-DMPE derivative is transferred. Boar spermatozoa and peripheral human blood lymphocytes have been used as cellular models. The extent of incorporation is dependent on the incubation time and temperature. At 36°C, lucifer yellow fluorescence appears in the spermatozoa cells after 10 min of incubation and reaches its maximum at about 60 min. The fluorescent phospholipid derivative seems to incorporate specifically into membrane structures. The highest labeling ratio is observed with integer, scarcely motile, spermatozoa. A poorer labeling yield (15%) is found with lymphocytes. Interestingly, photobleaching due to epiillumination of the labeled cells is apparently negligible and cells are clearly visible after irradiation times ranging from several minutes to few hours.A preliminary account of this work was presented at the Quarto Simposio su Biotecnologie Biochimiche, Capri, 28–30 June 1992.     

Gas Phase Catalysis by Metal Nanoparticles in Nanoporous Alumina Membranes

Nanoporous alumina membranes, loaded with palladium and ruthenium nanoparticles of various size, were used for gas phase hydrogenation of 1, 3‐butadiene and for oxidation of carbon monoxide, respectively. Those membranes contain 10⁹ ‐ 10¹¹ pores per cm², all running perpendicular to the surface. Membrane discs of 20 mm in diameter and only 60 μm thick, incorporated in a reactor in which the reactants can be pumped in a closed circuit through the pores, turned out to very actively catalyze hydrogenation of butadiene (Pd) and oxidation of CO (Ru). The activity of the Pd catalysts depends characteristically on the particles size, the gas flow, and of the educts ratio. As could be expected, larger particles are less active than smaller ones, whereas increasing gas flows in case of hydrogenation accelerates the reactions. Excessive hydrogen reduces selectivity with respect to the various butenes, but favours formation of butane.