A Global Solution to a Two-dimensional Riemann Problem Involving Shocks as Free Boundaries

We present a global solution to a Riemann problem for the pressure gradient system of equations.The Riemann problem has initially two shock waves and two contact discontinuities. The angle between the two shock waves is set initially to be close to 180 degrees. The solution has a shock wave that is usually regarded as a free boundary in the self-similar variable plane. Our main contribution in methodology is handling the tangential oblique derivative boundary values.     

一种捕捉多向刚性爆轰波的激波定位随机投影方法

提出一种激波定位随机投影方法,利用当地随机投影,引入激波指示器并提出恰当的判定当地投影区域的规则,使爆轰波多向推进的问题得以解决。数值实验表明,激波定位随机投影方法不仅适用于爆轰波的多向推进,还能高效求解刚性反应方程,易于推广到三维情况。     

激光冲击强化“残余应力洞”的形成机制

利用ABAQUS有限元软件进行了单个圆形高斯光斑的激光冲击强化数值模拟,分析材料表面光斑中心区域形成的"残余应力洞"现象,并通过分析材料的动态力学响应特征揭示了"残余应力洞"的形成机制。结果表明:在冲击波加载时,光斑边界处会产生很强的剪切应力,形成向四周传播的表面稀疏波和向材料内部传播的剪切波。当稀疏波同时传播到光斑中心,发生相遇、汇聚,使材料产生急剧的上下位移过程,造成冲击波加载塑性变形后的二次塑性变形。二次塑性变形中形成了较大的剪切塑性应变,并降低了冲击波加载阶段产生的轴向和径向塑性应变,使残余压应力降低,从而形成"残余应力洞"。     

Planar and Nonplanar Shock Waves in a Degenerate Quantum Plasma

The nonlinear propagation of modified electron‐acoustic (mEA) shock waves in an unmagnetized, collisionless, relativistic, degenerate quantum plasma (containing non‐relativistic degenerate inertial cold electrons, both nonrelativistic and ultra‐relativistic degenerate hot electron and inertial positron fluids, and positively charged static ions) has been investigated theoretically. The well‐known Burgers type equation has been derived for both planar and nonplanar geometry by employing the reductive perturbation method. The shock wave solution has also been obtained and numerically analyzed. It has been observed that the mEA shock waves are significantly modified due to the effects of degenerate pressure and other plasma parameters arised in this investigation. The properties of planar Burgers shocks are quite different from those of nonplanar Burgers shocks. The basic features and the underlying physics of shock waves, which are relevant to some astrophysical compact objects (viz. non‐rotating white dwarfs, neutron stars, etc.), are briefly discussed. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

激光诱导AZ31B镁合金薄板动态响应实验研究

为分析在激光冲击波作用下AZ31B镁合金薄板背面的动态响应,采用聚偏氟乙烯贴片传感器与数字示波器对强激光诱导的冲击波进行测量,得到压电波形,结合冲击波的传播特性,对弹塑性双波的传播规律进行了研究。结果表明：激光诱导的材料动态响应是快速的;压电波形图反映出的弹性前驱波与塑性加载波传播到靶材背面的时间与理论时间相符;弹性前驱波能量小引发的波形振幅较小,紧随着的塑性加载波能量大并引起较大振幅波动,弹塑性双波卸载过程与紧接着的加载过程导致了压电信号的波动振幅提高。     

激光冲击与渗碳复合工艺改善12CrNi3A钢磨损性能

为了提高12CrNi3A钢渗碳层质量及其抗磨损性能,提出了激光冲击与渗碳不同顺序复合的工艺方法。球磨实验结果表明,相比渗碳处理,激光冲击后渗碳试样的比磨损率降低了51%,而渗碳后激光冲击强化试样的比磨损率降低了13%,说明激光冲击后渗碳的复合工艺能更好地改善抗磨损性能。在摩擦系数差别不大的情况下,抗磨损性能的提升与显微硬度提高、微观组织变化有关,从这两方面讨论抗磨损性能提升的机理。研究表明:激光冲击强化可促进渗碳的过程,强化后渗碳形成的渗碳层结构致密,大量细小碳化物形成,固溶强化、第二相强化作用增强,显微硬度增大,从而提高抗磨损性能;而渗碳后激光冲击强化只使渗层表面发生了形变强化,与渗碳工艺相比,显微硬度略有提高,抗磨损性能提高有限。     

不同水底介质对有限域中装药沉底爆炸特性的影响

通过开展装药沉底爆炸原理性实验研究,得到了不同水底条件对装药沉底爆炸气泡运动和冲击波压力的影响规律:沉底装药水下爆炸气泡通常呈半球形,依附在水底并同时急剧膨胀达到最大半径,随后气泡做收缩运动并连带水底介质颗粒迅速上浮,同时形状发生显著变化,如在石底和泥底时气泡在水底射流的作用下呈蘑菇状上浮,砂底时气泡则呈现出柱状上浮、未出现明显脉动运动即已坍塌破裂;沉底爆炸与水底介质发生强烈耦合作用而形成不同程度的反射波,通常水下石底的反射冲击波较泥底和砂底更强烈,且一般迭加后的冲击波峰值压力高于入射波阵面压力;不同水底介质条件下,装药与水底发生的强烈耦合作用均对水底造成强冲击破坏。     

Magneto-elasto-dynamic analysis of an elastically confined conducting nanowire due to an axial magnetic shock

Vibration of a conducting nanowire embedded in an elastic matrix due to an axial magnetic shock is of concern. Based on Maxwell?s and Cauchy?s equations, a model is proposed to study the problem in the context of nonlocal continuum theory. For solving the equations of motion of the nanowire, an analytical approach and a semi-analytical technique are proposed for low and high levels of small-scale parameter, respectively. The effects of small-scale parameter, stiffness of the surrounding matrix, and duration of the applied magnetic shock on the maximum dynamic elastic fields are examined.     

Gasdynamic characteristics of toroidal shock and detonation wave converging

Shock wave focusing is a fundamental problem in the shock wave research and the instantaneous impulse of high temperature and pressure generated at the focal points has been applied recently in industrial and medical researches[1]. There are several methods to create shock wave focusing, among which the more commonly-used one is to make a planar shock wave reflect from a concave surface, such as the elliptical or parabolic re- flector. Toroidal shock wave focusing has been proposed and investi…     

加速器电水锤数值模拟与实验研究

强流加速器水介质形成线放电或击穿形成的冲击波对陶瓷真空界面具有破坏作用。为获得该冲击载荷的信息,应用通用软件ANSYS/LS-DYNA建立了一种水下爆炸有限元模型,将电弧放电等效为爆炸源,模拟得到了冲击波传播时序、压力历史曲线及陶瓷板的加速度响应;为验证模型的有效性,应用"针-板"电极水开关在输出电脉冲40～50 ns、幅值100～300 kV可调的10级陡化前沿Marx发生器上开展了电水锤缩比实验研究。实测了不同击穿电压下冲击波峰压、波速和主脉冲宽度,并依据经验公式计算了放电沉积能量和冲击波能量,平均约17%的间隙放电能量转换为冲击波机械能。对冲击波能量与峰压关系进行了拟合,并与数值模拟结果进行了比较,二者变化趋势基本一致,量级上吻合较好。