The effect of magnetic field heat treatment on magnetostriction of Terfenol-D 2-2 composites

Based on the analysis of the magnetostriction for Terfenol-D composites, Terfenol-D 2-2 magnetostrictive composites have been prepared with laminations perpendicular to [1 1 2] axes. Then one of the samples was annealed in the vacuum at 423 K for 15 min at the magnetic field of 240 kA/m, which is along the direction of laminations and vertical to the [1 1 2] axes of the specimen. The static magnetostriction λ and dynamic magnetostrictive coefficient d₃₃ of samples were measured under the compressive stress of 0, 2, 4, 6 and 8 MPa. Effects of the compressive stress and the magnetic field heat treatment on the magnetostriction λ have been investigated. It is found that the magnetostriction of 2-2 composites can be improved under the compressive stress when the magnetic field is larger than 20 kA/m. The magnetostriction of 2-2 composites with the magnetic field heat treatment increases under compressive stress, and it can reach 1390×10⁻⁶ at the magnetic field of 200 kA/m and under the compressive stress of 4 MPa, much larger than the value of 860×10⁻⁶ without the magnetic field heat treatment. The highest magnetostriction of the 2-2 composite with the magnetic field heat treatment can reach 1530×10⁻⁶. The dynamic magnetostrictive coefficient d₃₃ of 2-2 composites with the magnetic field heat treatment have been improved, compared with that without magnetic field heat treatment. The maximum value of d₃₃ of the sample with magnetic field heat treatment is 71% larger than that without magnetic field heat treatment.     

Analysis of film strain and stress in a film-substrate cantilever system

The bending problem of a magnetic film-nonmagnetic substrate cantilever system is studied by using the principle of energy minimization. Emphasis is placed on the analysis of geometrical and physical parameter dependence of the neutral plane, internal film stress and strain of the cantilever system, and then the influence of such a parameter on the bending characteristic is presented. The results indicate, owing to the anisotropic expanding feature of the magnetostriction, that the neutral plane is generally anisotropic, and moves downwards rapidly with the increasing thickness ratio. Meanwhile, the bounding rigidity of substrate on the film will decrease with the increasing thickness ratio, and thus release the film stress, i.e., it decreases, but the film strain increases. The effect of Poisson’s ratio of the materials on the film strain, the stress and the neutral plane in the direction transverse to the magnetization is prominent. For the strain and the stress in the magnetization, however, the role of Poisson’s ratio is inconspicuous. This property is due to the initiative elongating (or contracting) feature of the magnetic film along its magnetization. Supported by the National Natural Science Foundation of China (Grant No. 10762001), the Key Project of the Chinese Ministry of Education (Grant No. 206024), and the Program for New Century Excellent Talents in University of China (Grant No. NCET-2005-0272)     

Analytical solutions for some defect problems in 1D hexagonal and 2D octagonal quasicrystals

We study some typical defect problems in one-dimensional (1D) hexagonal and two-dimensional (2D) octagonal quasicrystals. The first part of this investigation addresses in detail a uniformly moving screw dislocation in a 1D hexagonal piezoelectric quasicrystal with point group 6mm. A general solution is derived in terms of two functions φ ₁, φ ₂, which satisfy wave equations, and another harmonic function φ ₃. Elementary expressions for the phonon and phason displacements, strains, stresses, electric potential, electric fields and electric displacements induced by the moving screw dislocation are then arrived at by employing the obtained general solution. The derived solution is verified by comparison with existing solutions. Also obtained in this part of the investigation is the total energy of the moving screw dislocation. The second part of this investigation is devoted to the study of the interaction of a straight dislocation with a semi-infinite crack in an octagonal quasicrystal. Here the crack penetrates through the solid along the period direction and the dislocation line is parallel to the period direction. We first derive a general solution in terms of four analytic functions for plane strain problem in octagonal quasicrystals by means of differential operator theory and the complex variable method. All the phonon and phason displacements and stresses can be expressed in terms of the four analytic functions. Then we derive the exact solution for a straight dislocation near a semi-infinite crack in an octagonal quasicrystal, and also present the phonon and phason stress intensity factors induced by the straight dislocation and remote loads.      

An automated vane shear test tool for environmental monitoring with unmanned ground vehicles

The present work describes the development of a novel robotic vane shear test tool for characterization of soil parameters with high precision and accuracy. The tool automates industrial standards for testing procedures. The proposed system is capable of performing high resolution torque measurements, which are then used to estimate the shear strength of the soil. The design of the instrument and its advantages over traditional manual instruments are discussed, after which error sources, calibration, and test procedures are described. The developed tool was successfully validated against high-end commercial equipment. The built unit was employed for characterizing mine waste in a laboratory setting and also deployed in the field on board an Unmanned Ground Vehicle for remote soil characterization.     

Biocatalytic Feedback‐Controlled Non‐Newtonian Fluids

Non‐Newtonian fluids are ubiquitous in daily life and industrial applications. Herein, we report an intelligent fluidic system integrating two distinct non‐Newtonian rheological properties mediated by an autocatalytic enzyme reaction. Associative polyelectrolytes bearing a small amount of ionic and alkyl groups are engineered: by carefully balancing the charge density and the hydrophobic effect, the polymer solutions demonstrate a unique shear thickening property at low pH while shear thinning at high pH. The urea‐urease clock reaction is utilized to program a feedback‐induced pH change, leading to a strong upturn of the nonlinear viscoelastic properties. As long as the chemical fuel is supplied, two distinct non‐Newtonian states can be achieved with a tunable lifetime span. As a proof of concept, we demonstrate how the physical energy‐driven nonequilibrium properties can be manipulated by a chemical‐fueled process.     

First-principles investigation on ideal strength of B2 NiAl and NiTi alloys

For B2 NiAl and NiTi intermetallic compounds, the ideal stress–strain image is lack from the perspective of elastic constants. We use first-principles calculation to investigate the ideal strength and elastic behavior under the tensile and shear loads. The relation between the ideal strength and elastic constants is found. The uniaxial tension of NiAl and NiTi along <001> crystal direction leads to the change from tetragonal path to orthogonal path, which is driven by the vanishing of the shear constant C(66). The shear failure under {110}{111} shear deformation occurring in process of tension may result in a small ideal tensile strength(~ 2 GPa) for NiTi. The unlikeness in the ideal strength of Ni Al and Ni Ti alloys is discussed based on the charge density difference.     

聚变实验堆真空室壳体成型残余应力分析

为了了解聚变实验堆真空室壳体表面残余应力的分布以及退火工艺对残余应力的影响,通过模拟分析和实验检测两种方式对不锈钢316LN冷压曲面和热压曲面残余应力进行研究,获得退火前后曲面表面残余应力的大小,得到冷压曲面和热压曲面残余应力的分布以及退火工艺对残余应力分布的影响。研究结果为分析成型工艺提供数据支撑,对中国聚变工程实验堆真空室的研究与制造具有重要意义。     

Superposition of large butt-end and coaxial torsional and axial shear deformations of homogeneous and fiber-reinforced thick-wall cylinders

A mathematical model of superposition of large butt-end and coaxial torsional and axial shear deformations of homogeneous and fiber-reinforced thick-wall cylinders is constructed. The macroscopic stresses of the reinforced material are additively determined by matrix stresses and by tensile or constrained compression stresses in the reinforcing fibers. The model is based on the numerical solution of two boundary-value problems, one of which corresponds to the butt-end torsion and the other to the coaxial torsion and axial shear. The boundary-value problem on joint deformations is solved with the use of the displacement field determined from the solution to the boundary-value problem on butt-end torsion. The results obtained by applying this method to homogeneous and axially-radially reinforced thick-wall cylinders subjected to butt-end torsion with subsequent coaxial torsion and axial shear are presented. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 43, No. 4, pp. 465–492, July–August, 2007.     

动脉中血液脉动流的一种分析方法

动脉中的血液流动被分解为平衡状态(相当于平均压定常流状态)和叠加在平衡状态上的周期脉动流,利用Fung的血管应变能密度函数分析血管壁在平衡状态下的应力-应变关系,确定相对于平衡状态血管作微小变形所对应的周向弹性模量和轴向弹性模量,并建立在脉动压力作用下相应的管壁运动方程,与线性化Navier-Stokes方程联立,求得血液流动速度和血管壁位移的分析表达式,详细讨论血管壁周向和轴向弹性性质差异对脉博波、血液脉动流特性以及血管壁运动的影响.     

由压痕蠕变试验确定材料的蠕变性能参数

研究由平头压痕蠕变试验来确定受压材料蠕变性能参数的可行性。利用有限元蠕变分析确定在定压痕应力下的压痕蠕变率,重点放在稳定压痕蠕变率和受压材料蠕变性能参数的关系上。详细地研究了压头形状、大小和宏观约束对压痕蠕变响应的影响:当压头的尺寸和受压材料为同一数量级时,宏观约束将有十分明显的影响。提出两种方法来由压痕蠕变试验来确定受压材料蠕变性能参数,并给出了算例,结果有利于准确认识平头压痕蠕变试验,从而拓宽其应用范围。