A novel self-locked energy absorbing system

Metallic thin-walled round tubes are widely used as energy absorption elements. However, lateral splash of the round tubes under impact loadings reduces the energy absorption efficiency and may cause secondary damage. Therefore, it is necessary to assemble and fasten round tubes together by boundary constraints and/or fasteners between tubes, which increases the time and labor cost and affects the mechanical performance of round tubes. In an effort to break through this limitation, a novel self-locked energy-absorbing system has been proposed in this paper. The proposed system is made up of thin-walled tubes with dumbbell-shaped cross section, which are specially designed to interlock with each other and thus provide lateral constraint under impact loadings. Both finite element simulations and impact experiment demonstrated that without boundary constraints or fasteners between tubes, the proposed self-locked energy-absorbing system can still effectively attenuate impact loads while the round tube systems fail to carry load due to the lateral splashing of tubes. Furthermore, the geometric design for a single dumbbell-shaped tube and the stacking arrangement for the system are discussed, and a general guideline on the structural design of the proposed self-locked energy absorbing system is provided.     

Sound transmission from stiffened double laminated composite plates

An analytical model is developed to investigate the sound transmission loss from orthogonally rib-stiffened double laminated composite plates structure under a plane sound wave excitation, in which first order shear deformation theory is presented for laminated composite plates. By using the space harmonic approach and virtual work principle, the sound transmission loss is described analytically. The validity and feasibility of the model are verified by comparing the present theoretical predictions with numerical results published previously. The influences of structure geometrical parameters on sound transmission loss are subsequently presented. Through numerical results, it can be concluded that the proposed analytical model is accurate and simple in solving the vibroacoustic behavior of an orthogonally rib-stiffened double laminated composite plates.     

Shear‐induced structuring kinetics in thermoplastic segmented polyurethanes monitored by rheological tools

Thermoplastic segmented polyurethanes (TPUs) are an important class of thermoplastic elastomers with a two‐phase microstructure arising from the thermodynamic incompatibility between hard (HSs) and soft segments. This microphase separation observed on cooling from a homogeneous state is often combined with the solidification of either or both types of segments. In this study, the structuring mechanism of two TPUs with HSs based on 4,4′‐diphenylmethane diisocyanate and 1,4‐butanediol was investigated from rheological measurements. Hence, in addition to the structuring temperature influence, the effect of an applied preshear flow in the melt polymer was analyzed, in particular. The results clearly show an enhancement of the solidification kinetics by the preshear. Indeed, the measured structuring time can be reduced by more than 1 decade. Rheo‐optical microscopy observations coupled with a shearing hot stage corroborated these results and showed the modification of the microstructure by the shear. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 190–201, 2010     

Wall shear stress and near-wall convective transport: Comparisons with vascular remodelling in a peripheral graft anastomosis

Fluid dynamic properties of blood flow are implicated in cardiovascular diseases. The interaction between the blood flow and the wall occurs through the direct transmission of forces, and through the dominating influence of the flow on convective transport processes. Controlled, in vitro testing in simple geometric configurations has provided much data on the cellular-level responses of the vascular walls to flow, but a complete, mechanistic explanation of the pathogenic process is lacking. In the interim, mapping the association between local haemodynamics and the vascular response is important to improve understanding of the disease process and may be of use for prognosis. Moreover, establishing the haemodynamic environment in the regions of disease provides data on flow conditions to guide investigations of cellular-level responses.     

Influence of pressure on the relative population of the two lowest vibrational levels of the C <Superscript>3</Superscript> Π<Subscript>u</Subscript> state of nitrogen for electron beam excitation

Continuous and pulsed 12 keV electron beams were used to excite nitrogen within a gas cell at pressures ranging from 10 to 1400 hPa. The pressure dependence of the ratio of photon fluxes for emission from vibrational levels v'=0 and 1 of the C ³Π _u state has been studied. The results confirm the presence of a collisional excitation mechanism populating v'=0, 1 in addition to electron impact excitation. Rate constants of (1.27 ±0.04)×10^-11 cm³s^-1 [ v'=0] and (2.68 ±0.08)×10^-11 cm³s^-1 [ v'=1] were measured for C ³Π _u quenching by ground state nitrogen. For electron beam conditions relative excitation efficiencies of 1:0.59:0.22 for vibrational levels 0, 1 and 2 were calculated. The recorded flux ratios are compared with the predictions given by a vibrational relaxation model.     

飞秒激光激发空气电离的阈值研究

报道在脉宽50fs—22ps，波长800nm脉冲激光作用下的空气电离阈值的研究结果.利用探测等离子体发光信号的方法，实验测量了激发空气电离所需的阈值激光强度.结果表明，当激光脉冲宽度从50fs增加到22ps时，阈值光强I_th从8.7×10¹⁴W/cm²下降到2.7×10¹³W/cm²；I_th经历了由迅速降低逐渐发展为缓慢降低的过程.在50fs—1p     

A novel pose and illumination robust face recognition with a single training image per person algorithm

In the real-world application of face recognition system, owing to the difficulties of collecting samples or storage space of systems, only one sample image per person is stored in the system, which is so-called one sample per person problem. Moreover, pose and illumination have impact on recognition performance. We propose a novel pose and illumination robust algorithm for face recognition with a single training image per person to solve the above limitations. Experimental results show that the proposed algorithm is an efficient and practical approach for face recognition.     

Comparison of shear banding in BMGs due to thermal-softening and free volume creation

This paper reports a comparative study of shear banding in BMGs resulting from thermal softening and free volume creation. Firstly, the effects of thermal softening and free volume creation on shear instability are discussed. It is known that thermal softening governs thermal shear banding, hence it is essentially energy related. However, compound free volume creation is the key factor to the other instability, though void-induced softening seems to be the counterpart of thermal softening. So, the driving force for shear instability owing to free volume creation is very different from the thermally assisted one. In particular, long wave perturbations are always unstable owing to compound free volume creation. Therefore, the shear instability resulting from coupled compound free volume creation and thermal softening may start more like that due to free volume creation. Also, the compound free volume creation implies a specific and intrinsic characteristic growth time of shear instability. Finally, the mature shear band width is governed by the corresponding diffusions (thermal or void diffusion) within the band. As a rough guide, the dimensionless numbers: Thermal softening related number B, Deborah number (denoting the relation of instability growth rate owing to compound free volume and loading time) and Lewis number (denoting the competition of different diffusions) show us their relative importance of thermal softening and free volume creation in shear banding. All these results are of particular significance in understanding the mechanism of shear banding in bulk metallic glasses (BMGs). Supported by the Chinese Academy of Sciences under the project “Multi-Scale Complex System” (Grant No. KJCX-SW-L08), the National Natural Science Foundation of China (Grant Nos. 10725211 and 10721202), and the Doctorial Start-up Fund of Hunan University of Science and Technology (Grant No. E50840)     

Dynamic adhesive strength of fiber-polymer systems

A new device for studying the dynamic adhesive strength is created. A procedure for determining the dynamic adhesive strength in fiber—polymer systems under impact loading (pull-out technique) is developed. The adhesive strength of the interface of polymer—steel wire joints formed by polymers of different chemical nature (epoxy resin, polysulfone, and polypropylene) is examined. It is shown that the dynamic adhesive strength grows as the loading rate increases for all the systems under investigation and that the relationship between the adhesive strength and the loading rate, , over a wide range of rates can be described by two straight lines corresponding to the quasi-static and impact loading, respectively. When passing from the quasi-static to dynamic loading, the character of scale relations of the adhesive strength does not change.Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 689–700, November–December, 1999.     

Dissociative attachment of low-energy electrons to vibrationally excited molecules using a photoelectron source

The process of dissociative attachment (DA) of low-energy electrons ) to vibrationally excited sodium dimer molecules is studied with high electron energy resolution () in a supersonic molecular beam. A novel photoelectron source, based on two-step photoionization of the sodium atoms in the beam, may deliver a current of up to 1 nA and has been used with a current of typically 0.2 nA in this experiment. The energy dependence of the rate of sodium anion formation is determined by ion detection based on a time-of-flight analysis. The molecules are selectively excited to levels using the technique of coherent population transfer by delayed pulses (STIRAP). The comparison of the experimental data with recent resonance model calculations based on improved potential curves reveals generally good agreement for levels v ”>12. For some distinct differences between theoretical and experimental results persist. Received: 21 November 1998 / Received in final form: 7 April 1999