光强连续可调的圆偏振光衰减器

利用1/4波片及偏光棱镜,设计了光强连续可调的圆偏振光衰减器,通过该器件可获得偏振度高且光强连续可调的圆偏振光.该衰减器解决了632.8 nm多膜氦氖激光器出射光为非完全自然光且偏振面随时间做随机变化导致实验误差的问题,为偏光信息测试系统提供了相对稳定的激光光源.     

米散射理论在新型导光板中的应用

根据米散射理论,提出了新型导光板的设计思路,计算并分析了对于一定波长的入射光,不同粒径的微粒的散射特性。总结了随着微粒粒径的变化,散射效率、消光效率与背向散射效率的变化规律,分析了散射过程中的偏振度随粒子粒径几散射角变化的情况,同时模拟计算了多个微粒对同一波长的入射光经过多次散射后的概率统计结果。     

Stationary Flow Past a Semi-Infinite Flat Plate: Analytical and Numerical Evidence for a Symmetry-Breaking Solution

We consider the question of the existence of stationary solutions for the Navier Stokes equations describing the flow of a incompressible fluid past a semi-infinite flat plate at zero incidence angle. By using ideas from the theory of dynamical systems we analyze the vorticity equation for this problem and show that a symmetry-breaking term fits naturally into the downstream asymptotic expansion of a solution. Finally, in order to check that our asymptotic expressions can be completed to a symmetry-breaking solution of the Navier–Stokes equations we solve the problem numerically by using our asymptotic results to prescribe artificial boundary conditions for a sequence of truncated domains. The results of these numerical computations a clearly compatible with the existence of such a solution. Mathematics Subject Classification (2000). 76D05, 76D25, 76M10, 41A60, 35Q35 Supported in part by the Fonds National Suisse.     

Parallel Plate Interferometer with a Reflecting Mirror for Measuring Angular Displacement

A parallel plate interferometer with a reflecting mirror for measuring angular displacement is proposed. A deflection angle of a beam caused by an angular displacement is amplified by use of a reflecting mirror to increase the optical path difference (OPD) in the plane-parallel plate, which provides high sensitivity of the phase measurement. Detection of light transmitted through the plane-parallel plate with a position sensitive detector (PSD) enables high accurate measurement of the initial angle of incidence to the plane-parallel plate with insensitivity to stray light. The improved parallel plate interferometer achieves a measurement repeatability of 10⁻⁸ rad.     

高性能微通道板除气过程中电阻的变化

比较了高性能微通道板和标准型微通道板在经过相同或类似制管工艺处理前、后电阻的变化，测定了高性能微通道板分别在真空烘烤和2个不同阶段电子清刷后电阻随电压及温度的变化关系。实验结果表明：高性能微通道板的热稳定性优于标准型微通道板，其电阻温度系数为-0.007/℃；经过第二阶段清刷后，电阻随电压的变化缓慢，电压系数为-1.11×10^-4V^-1；用这种材料和工艺制作的低电阻、大动态范围、高稳定性微通道板可满足特种探测器的需求。     

Simulation of non-selfadjoint control of thin elastic plates in the presence of conservative in-plane forces

Summary Based on the analysis presented in [1], a closed-form solution for the response of a controlled plate to a transversely applied dynamic loading is presented. Both the applied loading and the control are considered to be continuously distributed. The results and the corresponding parametric study are presented for two common boundary conditions of SSSS and SFSF in the plates. Received 11 March 1997; accepted for publication 18 March 1998     

Maximum principles for a fourth order equation from thin plate theory

This paper focuses on a nonlinear equation from thin plate theory of the form Δ(D(x)Δw)−(1−ν)[D,w]+c(x)f(w)=0. We obtain maximum principles for certain functions defined on the solution of this equation using P-functions or auxiliary functions of the types used by Payne [L.E. Payne, Some remarks on maximum principles, J. Anal. Math. 30 (1976) 421-433] and Schaefer [P.W. Schaefer, Solution, gradient, and laplacian bounds in some nonlinear fourth order elliptic equations, SIAM J. Math. Anal. 18 (1987) 430-434].     

各向异性介质的平行平板干涉

提出了各向异性介质平行平板干涉中的相位差计算方法.证明了e光干涉产生的条纹为严格的椭圆曲线,椭圆长短轴的比值等于o光主折射率与e光主折射率之比,而与晶体厚度、干涉级等参数无关.拍摄了实验干涉图,并用最小二乘法对干涉条纹进行椭圆曲线拟合,结果与理论完全一致.本文提出的方法可用于晶体主折射率比值的精确简便测量.     

Boundary integral equations in time-dependent bending of thermoelastic plates

The initial-boundary value problems with the Dirichlet and Neumann boundary conditions arising in the theory of bending of thermoelastic plates with transverse shear deformation are reduced to time-dependent boundary integral equations by means of layer potentials. The solvability of these equations is then investigated in Sobolev-type spaces.     

强脉冲载荷作用下弹-塑性薄圆板的大挠度动力响应

利用有限变形弹塑性连续体的最小加速度原理 ,建立了分析圆板动力响应问题的数值方法 ,并通过对均匀分布的脉冲载荷作用下铰支圆板位移响应的细致分析 ,探讨了响应过程中的饱和冲量现象 ,指出对于高载范围内的脉冲载荷 ,相应于最大变形的饱和冲量确实是存在的。结果还表明 ,虽然圆板的弹塑性动力分析非常复杂 ,但基于最小加速度原理的数值计算方法却具有简单、直接的优点。