Studies on the thermodynamics of solvent extraction of indium (III) with HDEHMTPCA

The equilibrium molalities In³⁺ in {In₂(SO₄)₃ + Na₂SO₄ + HDEHMTPCA + n-C₈H₁₈ + water} were measured at ionic strength from (0.1 to 2.0) mol · kg⁻¹ containing Na₂SO₄ as supporting electrolyte in aqueous phase and at constant molality extractant at temperatures from (278.15 to 303.15) K in organic phase. The standard extraction constants K⁰ at various temperatures were obtained by methods of extrapolation and polynomial approximation. Thermodynamic quantities for the extraction process were calculated.     

The thermal properties of poly(oxy-1,4-benzoyl), poly(oxy-2,6-naphthoyl), and its copolymers

The thermal properties, i.e., heat capacity, enthalpy, entropy, and Gibbs function, and the transition behavior of the copolymer system of 4-hydroxybenzoic acid and 2,6-hydroxynaphthoic acid have been studied based on differential scanning calorimetry. The heat capacities of the glass, crystal, and anisotropic melt are shown to be largely additive on a molar basis. Additivity is lost in the two transition regions, glass transition and disordering transition. Isothermal crystallization experiments on the copolymers revealed the existence of two types of crystals which melt at high temperature (fast-grown crystals) and low temperature (slowly grown crystals). The ATHAS computation method is used to bring heat capacities of the solid state into agreement with approximate frequency spectra. The changes in heat capacity at the glass transitions occur at 434°K for the poly(oxy-1,4-benzoyl) [33.2 J/(K mol)] and at 420°K for poly(oxy-2,6-naphthoyl) [46.5 J/(K mol)]. The copolymers have a transition range of above 100°K. The anisotropic melt is linked to the well-known condis state of poly(oxy-1,4-benzoyl) by a continuous changes in disorder and mobility without an additional first-order transition.     

Value function and optimality conditions for semilinear control problems

This paper is concerned with optimal control problems of Mayer and Bolza type for systems governed by a semilinear state equationx(t)=Ax(t) + f(t, x(t), u(t)), u(t) U, whereA is the infinitesimal generator of a strongly continuous semigroup in a Banach spaceX. We prove necessary and sufficient conditions for optimality and then use these conditions to investigate properties of the value function related to superdifferentials. Conversely, we use the value function to obtain criteria for optimality and feedback systems.Work (partially) supported by the Research Project Equazioni di evoluzione e applicazioni fisicomatematiche (M.U.R.S.T.-Italy).     

Miscibility and phase separation in SAN/PMMA blends investigated by positron lifetime measurements

Miscibility and phase separation in SAN/PMMA blends have been investigated using DSC, IR spectroscopy and positron lifetime spectroscopy (PLS). Single broad glass transition observed throughout the blend compositions, may be due to overlap of two glass transitions. IR measurements clearly indicate the absence of strong interactions. This supports miscibility is due to intramolecular repulsive forces in the SAN component. On the other hand, free volume data show negative deviation from linear additivity indicating the blends are miscible. The interchain interaction parameter β exhibits a complex behavior and the extent of miscibility is not revealed. Following Wolf’s treatment, we have evaluated the geometry factor γ and hydrodynamic interaction parameter α and found α is a suitable parameter in predicting the miscibility window. The cloud points in SAN/PMMA blends increase with decreasing PMMA content. The change in free volume size correlates well with the observed change in cloud point.     

Evaluation of the surface tension measurement of axisymmetric drop shape analysis (ADSA) using a shape parameter

A quantitative criterion called “shape parameter” to evaluate the quality of surface tension measurement of Axisymmetric Drop Shape Analysis (ADSA) is presented. ADSA is a powerful technique for the measurement of interfacial tensions and contact angles of pendant drops, sessile drops, and bubbles. Despite the general success of ADSA, deficient results may be obtained for drops close to spherical shape. Therefore, the “shape parameter” was used to determine the range of drop shapes in which ADSA succeeds or fails. The “shape parameter” is a dimensionless parameter that expresses quantitatively the difference in shape between a given experimental profile and an inscribed circle. The surface tension measurements of ADSA were evaluated for both pendant drop and constrained sessile drop configurations using the shape parameter. Different shapes of the pendant drop were studied using different sizes and materials of holders. For each drop configuration, a “critical shape parameter” was defined based on the minimum value of the shape parameter that guarantees an error of less than ±0.1 mJ/m². Furthermore, the effects of the type of liquid and constellation on the “critical shape parameter” were studied.     

Thermal analysis study of Bi<Subscript>2</Subscript>Sr<Subscript>2</Subscript>Ca<Subscript>2</Subscript>Cu<Subscript>3-x</Subscript>Er<Subscript>x</Subscript>O<Subscript>10+δ</Subscript> glass-ceramic system

Summary We have fabricated glasses in the Bi-2223 HT_c superconductor system with Bi₂Sr₂Ca₂Cu_3-xEr_xO_{10+ δ} nominal composition, where x=0.5 and 1.0, by the glass-ceramic technique. Using an analysis developed for non-isothermal crystallization studies, information on some aspects of crystallization temperature and thermal properties has been obtained. The crystallization studies were made using DTA with several uniform rates. The calculations of crystallization activation energies, E_a, and the Avrami parameters, n, were made based on the non-isothermal kinetic theory of Kissinger and the Ozawa’s equations. The DTA data of the samples showed that the first crystallization temperature, T_x1, increases and the second crystallization temperature, T_x2, decreases by increasing the Er concentration. This suggests that the Er substitution had significant effect on the glassification of the BSCCO material due to change on the surface nucleation and increased ionic activities at high temperature region. The activation energy for crystallization, E_a, of the samples was also showed an increase at high Er concentration case. However, the Avrami parameter, n, decreased from 2.5 to 1.7 for x=0.5 and 1.0 samples, respectively. This suggests that the growth mechanism is diffusion-controlled and three-dimensional parabolic growth takes place near the first crystallization temperature. The oxidization rates and the activation barrier for oxygen out-diffusion process, E, was calculated using the TG data. It was found that the total mass gain in the x=0.5 sample is comparably smaller than that of the x=1.0 sample. This shows that the oxygen absorption of the x=1.0 sample is faster than the x=0.5 sample, leading to increase in the oxidization rate in the x=1.0 material.     

647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

强流射频四极加速器输入耦合环的物理设计研究

 详细讨论了强流射频四极加速器高频输入耦合环的一些基本问题，完成了高频输入耦合环的初步物理设计. 利用二维程序Superfish 的一些结果，确定了耦合环的大小，计算了耦合环的功耗，并对构成耦合环导线的粗细进行了估算。该耦合环的物理设计可作为耦合环试验的基础，同时，也可作为三维程序HFSS 模拟计算的起点。     

基于参数设计的信噪比交叉效率评价方法

针对DEA交叉效率评价过程中没有考虑自评与互评效率的作用而主观赋予相同权重导致交叉效率评价值不准确的问题.文章基于参数设计的思想,依据试验设计中可控与不可控因素的作用机理区分自评权重和互评权重对所评价决策单元交叉效率的影响与作用,将其界定为可控与不可控因素的管理学属性,明确不同权重作用机理;引入信噪比作为衡量决策单元交...     

Phase Transitions Induced by Top-Priority of Randomization

We study the characteristics of phase transition to take the top-priority of randomization in the rules of NaSch model (i.e.noise-first model) into account via computing the relaxation time and the order parameter.The scaling exponents of the relaxation time and the scaling relation of order parameter,respectively,axe obtained.