Synthesis of titanium nitride thin films deposited by a new shielded arc ion plating

Thin films of titanium nitride (TiN) were deposited on stainless steel substrates by a modified deposition technique, double-layered shielded arc ion plating with vicarious circular holes (DL-SAIP). The results show that the TiN film with the distance of 10 mm between the double-layered shield plates had the least droplets. The deposition rate of the films prepared with the new technique was more homogeneous than that of all the other shielded arc ion plating. The film/substrate adhesion and microhardness values of the TiN films were higher than 40 N and 18 GPa, respectively. Thus such TiN thin films can be expected in applications.     

Influence of superalloy substrate roughness on adhesion and oxidation behavior of magnetron-sputtered NiCoCrAlY coatings

The present study has been conducted in order to determine the influence of superalloy substrate roughness on adhesion and oxidation behavior of magnetron-sputtered NiCoCrAlY coatings. Six types of coating samples with different substrate roughness were tested. The surface roughness and real surface area of both the substrates and coatings were studied by atomic force microscopy (AFM) techniques. The scratch tests performed at progressive loads were employed to evaluate the adhesion of the coatings. Cyclic oxidation tests were performed at 1100 °C in air for 50 cycles, each cycle consisting of 1 h heating in the tube furnace followed by 15 min cooling in the open air. The AFM measurements exhibit that the surface roughness of the sputtered NiCoCrAlY coating increases with the increasing of the superalloy substrate roughness. The NiCoCrAlY coatings present slightly lower roughness than the corresponding superalloy substrate. The scratch adhesion tests indicate that the coatings on substrates with a smoother surface possess better adhesion than on those with a rougher surface. Both the real surface area and oxidation weight gain of the coatings decrease with the decreasing of the superalloy substrate roughness. The NiCoCrAlY coating sputtered on the superalloy substrate with lower roughness provides relatively higher antioxidant protection than that provided by the coating with rougher substrate.     

Percolative dielectric behavior of wet chemical synthesized lead lanthanum titanate-cobalt iron oxide composite thin films

We have investigated the electrical and magnetic properties of solution synthesized Pb_0.85La_0.15TiO₃-CoFe₂O₄ composite thin films. These composite films exhibit both polarization as well as magnetic hysteresis characteristics at room temperature. The dielectric constant of the composite films is found to increase remarkably up to 6.0 vol% CFO contents. The increase of the dielectric constant and loss tangent follow a general percolation model originally developed for metal-ceramic composites. It is argued that Maxwell-Wagner polarization, as well as diffusion of transition metal cation(s) from CFO to PLT15 lattice are responsible for the percolative behavior of the dielectric properties in these films.     

Surface modification of an epoxy resin with polyamines via cyanuric chloride coupling

The presence of polyamine groups on the surface of dielectric resins potentially improves the adhesion with electrochemically deposited metals. In this article, first cyanuric chloride is covalently bound to the surface hydroxyl groups of the epoxy resin. The remaining reactive sites on the coupled cyanuric chloride molecule are then used to anchor polyamines. New data on the triazine coupling is presented. The surface reactions are monitored and characterized by means of ATR-IR, SEM-EDS, XPS and ToF-S-SIMS.     

An Interpenetrated Framework Material with Hysteretic CO2 Uptake

A new, twofold interpenetrated metal–organic framework (MOF) material has been synthesized that demonstrates dramatic steps in the adsorption and hysteresis in the desorption of CO₂. Measurement of the structure by powder X‐ray diffraction (PXRD) and pair distribution function (PDF) analysis indicates that structural changes upon CO₂ sorption most likely involve the interpenetrated frameworks moving with respect to each other.     

Barium Sodium Niobate Powders and Thin Films: Preparation and Ferroelectric Behavior

Powders and thin films of barium sodium niobate, Ba₄Na₂Nb₁₀O₃₀, of filled tungsten bronze type ferroelectric were processed by a sol-gel route using barium metal, niobium ethoxide and sodium methoxide as precursors. Polycrystalline powder resulted after heat treating the gel powder at or above 650°C. Thin films of Ba₄Na₂Nb₁₀O₃₀ showed no preferred orientation on Si(100), Pt/Si(100) and sapphire substrates. Hysteresis measurements at 1 kHz for the thin films annealed at 750°C, obtained using a prehydrolyzed precursor solution, and gave remanent polarization of 17.34 µC/cm² and coercive field of 62.5 kV/cm. Microstructural investigation of surface morphology of these films revealed grains about 0.3 µm in size. Prehydrolysis of the precursor solution was found to be necessary to achieve dense films with ferroelectric properties.     

[mü]MAD, the adhesion based dynamic micro-manipulator

In this paper, a micro-manipulation method based on adhesion forces and dynamic effects is proposed. A prototype manipulator, called [mü]MAD, has been constructed and successfully experimented. Moreover, the advanced capabilities of [mü]MAD, especially two new interesting applications, are presented: sorting of micro-objects and mechanical characterizations.     

Simulations of the spreading of a vesicle on a substrate surface mediated by receptor-ligand binding

A continuum model was introduced for the adhesion of vesicles to substrate surfaces. In the model, the vesicle membrane was assumed to be a closed shell with hyperelasticity. The vesicle cavity is filled with a liquid of fixed volume. The receptors on the membrane are mobile and initially uniformly distributed while the ligands on the substrate surface are fixed and also uniformly distributed. The formation of localized regions of tight binding between receptors and ligands, results in vesicle adhesion to the substrate surface. An adhesive model was introduced to describe the adhesive interaction between the receptors and the ligands. The growth of the adhesion area occurs via recruiting receptors from the non-adhered region through diffusion. Finite-element methods were used to solve the governing equations for the deformation of the vesicle and the receptor diffusion on the membrane surface. Effects of the membrane stiffness, the cohesive parameters and the receptor density on the adhesion kinetics of the vesicle were studied. In addition, the instability of the advancing front of the adhesion was also analyzed.     

一类Hysteresis函数的微分(英文)

1 IntroductionThe theory of hysteresis operators developed in the past 20 years has pro-ved to be a powerful tool fOr solving mathematical probIems in various bran-ches of applications such as solid mechanics, material fatigue, ferromagnetism,phase tIansitbo, and many others. Many models Qf hysteresis operator havebeen constructed (see [1]--[4]). Since hysteresis operators make some good cha-racters (include differentiability) of functional sustain destruction, hysteresisfunctionals are not …     

Isopropyl alcohol plasma modification of polystyrene surfaces to influence cell attachment behaviour

An isopropyl alcohol plasma has been used to modify polystyrene surfaces by the deposition of a hydrophilic thin film. The films have been characterised by X-ray photoelectron spectroscopy, atomic force microscopy and water contact angle measurements. These studies show the oxygen content of the modified surfaces increases with treatment time up to ∼10 at.% after 600 s. Monochromated XPS results show the surface oxygen to be in the form of carbonyl and alcohol/ether groups with a complete absence of carboxyl species. The suitability of the modified surfaces for cell culture was assessed by the growth of transformed human fibroblast cells (1BR.3N) in the presence of serum proteins which made up ∼10% (v/v) of the culture media. Plasma treatment times >60 s were found to result in cell attachment and proliferation rates comparable to tissue culture polystyrene which has a similar total surface oxygen concentration with the addition of a carboxyl group functionality. A simple chemical patterning technique was used to produce chemically heterogeneous surfaces for spatially resolved cell attachment studies. 1BR.3N cells were found to attach preferentially to the areas exposed to the plasma which were more hydrophilic than the untreated regions.