Adsorption studies of organosubstituted laminated silicates

The hysteresis of sorptive deformation of sorbents has been studied for the first time. Based on the results obtained, it is assumed that the deformation of sorbents could be the universal reason for the sorptive hysteresis.For Part 1, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1477–1479, August, 1995.     

Theory of electron tunneling through a bridge molecule with two electronic levels at low temperatures

A theory of electron tunneling through a single-center bridge redox group that has two electronic levels participating in the electron transfer process is presented. The temperature is presumed to be low enough to ignore activation redox conversions of the bridge group. Salient features of this system are due both to the presence of two electroactive states of the bridge group and to relaxation processes along the reaction coordinate. The processes in question make the tunneling current time-dependent at fixed potentials and can bring about hysteresis in current-voltage curves when cycling the bias potential. Effects of inelastic tunneling with excitation of vibrations of a local quantum degree of freedom are considered.     

Surface structures of adsorption layers of sodium hyaluronate and bovine serum albumin complexes on poly(γ-methyl-l-glutamate) film and their surface properties

Two-dimensional structures and characteristics of the complexes between sodium hyaluronate (NaHA) and bovine serum albumin (BSA) were studied by using a quartz crystal microbalance method and an atomic force microscope (AFM). NaHA did not adsorb on poly(-methyl-l-glutamate) (PMLG) film. On the other hand, the complexes adsorbed on it and the adsorption behaviors were found to be Langmuir types. With increasing weight ratio of BSA to NaHA, W _BSA, the adsorption constants K decreased and the saturated adsorption masses increased. The adsorbed complexes were spherical particles and at saturated adsorption states they covered compactly on the PMLG film. The mean diameters d _AFM estimated from the topographic images decreased from 70 to 54 nm with increasing W _BSA. The adhesion force F _ad and the frictional force F _f between the complex layers and the AFM tip were obtained by using the contact mode of the AFM. With increasing W _BSA, the values of F _ad decreased and the values of F _f increased. Compared with the frictional coefficient of the NaHA adsorption layer on the BSA monolayer, the values for the NaHA–BSA complex layer were found to be much higher.     

Estimation of the dimensions of nano-capillaries from gas adsorption data

A new approach is presented to determine the dimensions of cylindrical nanopores from adsorption measurements.     

Nitrogen Adsorption Study of MCM-41 Molecular Sieves Synthesized Using Hydrothermal Restructuring

Nitrogen desorption scanning hysteresis loops (DSHLs) for large-pore MCM-41 silicas (pore diameter from 4.0 to 6.5 nm) are reported for the first time. DSHLs for MCM-41 were compared with those of conventional mesoporous silicas and no appreciable differences were found, although hysteresis loops and DSHLs for the latter were usually broader. Since desorption behavior of conventional porous silicas is appreciably influenced by pore connectivity, the observed similarity in hysteresis behavior suggests single-pore blocking effects for MCM-41 due to variation of pore diameter along its nonintersecting channels. It was also shown that the steepness of nitrogen desorption branches at relative pressures close to 0.4 often results from proximity of the lower pressure limit of adsorption-desorption irreversibility and consequently it is not justified to consider it as an indication of narrow pore size distribution. Thus, application of desorption data in calculations of pore size distributions may be grossly misleading.     

Bifurcation phenomena near homoclinic systems: A two-parameter analysis

The bifurcations of periodic orbits in a class of autonomous three-variable, nonlinear-differential-equation systems possessing a homoclinic orbit associated with a saddle focus with eigenvalues ( ±i,), where ¦/¦ < 1 (Sil'nikov's condition), are studied in a two-parameter space. The perturbed homoclinic systems undergo a countable set of tangent bifurcations followed by period-doubling bifurcations leading to periodic orbits which may be attractors if ¦/¦ < 1/2. The accumulation rate of the critical parameter values at the homoclinic system is exp(-2¦/¦). A global mechanism for the onset of homoclinicity in strongly contractive flows is analyzed. Cusp bifurcations with bistability and hysteresis phenomena exist locally near the onset of homoclinicity. A countable set of these cusp bifurcations with scaling properties related to the eigenvalues±i of the stationary state are shown to occur in infinitely contractive flows. In the two-parameter space, the periodic orbit attractor domain exhibits a spiral structure globally, around the set of homoclinic systems, in which all the different periodic orbits are continuously connected.     

Application of the JKR Method to the Measurement of Adhesion to Langmuir-Blodgett Cellulose Surfaces

The JKR method has been applied for studying adhesion between poly(dimethylsiloxane) (PDMS) caps and Langmuir–Blodgett cellulose surfaces including the substrate, hydrophobized mica, and two flat mineral surfaces, bare mica and glass. The self-adhesion of PDMS caps and oxidized PDMS caps are included as a reference to compare with literature data. The results of the measurements have been compared with previous studies using the surface force apparatus and similar systems. A satisfactory agreement is obtained for simple systems showing no, or very limited, hysteresis between loading and unloading curves. In several cases, however, a large hysteresis is found between loading and unloading curves, with a larger adhesion measured from the pull-off force than from the JKR-curve determined on loading. This is, for instance, the case for PDMS against cellulose. The situation is analogous to that found in wetting studies showing a large hysteresis between advancing and receding contact angles.     

Mechanism of the molecular hysteresis

The redox behavior in acetone solution of (1,5-dithiacyclooctane 1-oxide)bis(pentaammineruthenium(II)) has been characterized, where the concept of “molecular hysteresis” is presented. Detailed thermodynamics for the complex are studied, in which intramolecular electron transfer rates for Ru³⁺OS/Ru²⁺→Ru²⁺SO/Ru³⁺ were determined as 0.12 sec^?1 and 0.055 sec^?1. The molecular hysteresis consists of two important factors: isomerizations for the sulfoxideruthenium complexes and the slow intramolecular electron transfer in the complex; both are examined. Isomerization rates for Ru³⁺S→O and Ru²⁺O→S determined range from 0.4 to 5000 sec^?1 and from 0.7 to 16 sec^?1, respectively, for [Ru(NH₃)₅(sulfoxide)]^2+/3+. A mechanism for the slow electron transfer in the complex is also presented. Features of molecular hysteresis are discussed.     

Modulated differential scanning calorimetry in the glass transition region

Temperature-modulated calorimetry (TMC) allows the experimental evaluation of the kinetic parameters of the glass transition from quasi-isothermal experiments. In this paper, model calculations based on experimental data are presented for the total and reversing apparent heat capacities on heating and cooling through the glass transition region as a function of heating rate and modulation frequency for the modulated differential scanning calorimeter (MDSC). Amorphous poly(ethylene terephthalate) (PET) is used as the example polymer and a simple first-order kinetics is fitted to the data. The total heat flow carries the hysteresis information (enthalpy relaxation, thermal history) and indications of changes in modulation frequency due to the glass transition. The reversing heat flow permits the assessment of the first and higher harmonics of the apparent heat capacities. The computations are carried out by numerical integrations with up to 5000 steps. Comparisons of the calculations with experiments are possible. As one moves further from equilibrium, i.e. the liquid state, cooperative kinetics must be used to match model and experiment.On leave from Toray Industries, Inc., Otsu, Shiga 520, Japan.This work was supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U. S. Department of Energy at Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464. Support for instrumentation came from TA Instruments, Inc. Research support was also given by ICI Paints, and Toray Industries, Inc.     

溶有增粘树脂的丙烯酸酯乳液共聚及压敏胶的性能

用一步法将溶有松香或氢化松香的丙烯酸酯单体进行乳液共聚合时，由于增粘树脂分子的自由基链转移作用使单体的转化率明显降低．先将大部分丙烯酸酯单体进行乳液共聚制得种子乳液，再将溶有增粘树脂的剩余丙烯酸酯单体加到种子乳液中进行第二步乳液共聚合，可显著提高单体的总转化率．用ＴＥＭ对分步聚合所得复合乳液的粒子形态进行了观察并对第二步乳液共聚合的机理进行了讨论．用分步乳液共聚合的方法制得的增粘树脂 丙烯酸酯复合乳液共聚物的压敏胶粘性能较一步法有很大的提高．