Critical points in the Bragg glass phase of a weakly pinned crystal of Ca3Rh4Sn13

New experimental data are presented on the scan rate dependence of the magnetization hysteresis width ΔM(H) (∞ critical current densityJ _c(H)) in isothermalMH scans in a weakly pinned single crystal of Ca₃Rh₄Sn₁₃, which displays second magnetization peak (SMP) anomaly as distinct from the peak effect (PE). We observe an interesting modulation in the field dependence of a parameter which purports to measure the dynamical annealing of the disordered bundles of vortices injected through the sample edges towards the destined equilibrium vortex state at a givenH. These data, in conjunction with the earlier observations made while studying the thermomagnetic history dependence inJ _c(H) in the tracing of the minor hysteresis loops, imply that the partially disordered state heals towards the more ordered state between the peak field of the SMP anomaly and the onset field of the PE. The vortex phase diagram in the given crystal of Ca₃Rh₄Sn₁₃ has been updated in the context of the notion of the phase coexistence of the ordered and disordered regions between the onset field of the SMP anomaly and the spinodal line located just prior to the irreversibility line. A multi-critical point and a critical point in the (H,T) region of the Bragg glass phase have been marked in this phase diagram and the observed behavior is discussed in the light of recent data on multi-critical point in the vortex phase diagram in a single crystal of Nb.     

Quantitative measurement of tip-sample forces by dynamic force spectroscopy in ambient conditions

We introduce a dynamic force spectroscopy technique enabling the quantitative measurement of conservative and dissipative tip-sample forces in ambient conditions. In difference to the commonly detected force-vs-distance curves dynamic force microscopy allows to measure the full range of tip-sample forces without hysteresis effects caused by a jump-to-contact. The approach is based on the specific behavior of a self-driven cantilever (frequency-modulation technique). Experimental applications on different samples (Fischer-sample, silicon wafer) are presented.     

Sulfur adsorption on Fe(1 1 0): a DFT study

The adsorption of atomic S on the Fe(1 1 0) surface is examined using density functional theory (DFT). Three different adsorption sites are considered, including the atop, hollow and bridge sites and the S is adsorbed at a quarter monolayer coverage in a p(2 × 2) arrangement. The hollow site is found to be the most stable, followed by the bridge and atop sites. At all three sites, S adsorption results in relatively minor surface reconstruction, with the most significant being that for the hollow site, with lateral displacements of 0.09 Å. Comparisons between S-adsorbed and pure Fe surfaces revealed reductions in the magnetic moments of surface-layer Fe atoms in the vicinity of the S. At the hollow site, the presence of S causes an increase in the surface Fe d-orbital density of states between 4 and 5 eV. However, S adsorption has no significant effect on the structure and magnetic properties of the lower substrate layers.     

Formation of long range ordered arrangement of quantum dots with the help of lateral centripetal flow

A simple “chimney” method was used to eliminate the voids in an arrangement of quantum dots sized 2 nm on a solid substrate, which resulted in a large well ordered superlattice of area in the order more than 1 μm². Based on the principle of speeding up the interparticle interaction of nanoparticles to overcome the particle-substrate one, a lateral centripetal force originated from a glass tube acting as a chimney in a simple evaporation device is imposed. This method allows the packing process to be controlled in a mechanical force field, that is, with the same nanogold dispersion different patterns on a substrate—from separate dots to an ordered compact monolayer or even a multilayer structure—could be easily obtained.     

Adsorption Isotherm of Water Vapor and Its Large Hysteresis on Highly Ordered Mesoporous Silica

The first and second adsorption–desorption isotherms of water vapor on a new mesoporous material derived from kanemite have been measured. The isotherms show unusual type V isotherms and large hysteresis. The type V isotherms, which have never been observed for the other adsorbates, suggest that the mesoporous material has a hydrophobic surface, although the hydrophobicity decreased after treatment with water vapor because of rehydration of the surface. The significantly large hysteresis could be explained by the difference in contact angle between adsorption and desorption.     

JD树脂刻蚀及涂层的XPS研究

ＪＤ光学树脂表面刻蚀过程的ＸＰＳ研究表明，引进树脂遥ＣＯＨ，Ｃ＝Ｏ，Ｃ－ＳＯ３Ｈ，ＣＯＯＨ等基因随刻蚀温度的提高或时间的延长而增加，对其相对含量进行了计算，固化后的耐磨涂层具有ＳｉＯ２结构，ＪＤ板材的最佳刻蚀条件为２０℃，２０ｍｉｎ。     

Specific features of the thermodynamics of activation in the LaNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> and CeNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> systems

Using heat conducting Tian—Calvet calorimetry and volumetric measurements, the first hydrogen absorption—desorption cycles in the LaNi₅-H₂ and CeNi₅-H₂ systems were studied. The pressure—composition isotherms were plotted, the equilibrium pressures of hydrogen along the absorption and desorption branches and in the region of hysteresis for different activation steps were determined, and the enthalpies of phase transitions α → β and β → α were calculated. The profiles of the heat evolution curves were analyzed. It was concluded that the mechanism of the reactions studied changes upon activation.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 134–139, January, 2005.     

毛细管电泳分离几种神经递质的研究

研究了不同毛细管预处理方法对组胺、5-羟色胺及儿茶酚胺类神经递质电泳分离的影响，采用优化的毛细管预处理方法及电泳分离条件基线分离了组胺、5-羟色胺、去甲肾上腺素和肾上腺素。利用多巴胺和5-羟色胺在毛细管内壁吸附效应的不同，对电泳淌度极为相近的多巴胺和5-羟色胺进行了分离和鉴定。以PC22细胞为研究对象，证实了该细胞中所含大量神经递质是多巴胺，不是5-羟色胺。     

Structural and adhesion properties of surfaces functionalized with polyelectrolytes and polystyrene particles

Surfaces functionalized with polystyrene particles and polyelectrolytes were used to investigate the morphological and adhesion properties of composite substrates. Atomic force microscopy (AFM) studies showed that surfaces with non-homogeneous topography have non-homogeneous adhesion properties. In addition, the homogeneity of the adhesion properties is dependent upon the chemical species used to functionalize the surface. Force volume (FV) imaging was utilized to map the adhesion of the fabricated substrates with high-resolution. The FV studies revealed that the hydrophobicity of the surface is not uniform despite the fact that the surface was functionalized with the same polyelectrolyte. The analysis methodology we report here opens the possibility to design better surfaces for future tissue engineering applications.     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.