The lay-out of the photon collider at the international linear collider

One of the interaction regions at the linear colliders should be compatible both with e ⁺ e ⁻ and γγ, γe modes of operation. In this paper, the differences in requirements and possible design solutions are discussed.      

Surface elastic properties of Si decorated with Ni nanostructures

Brillouin spectroscopy was used to study elastic properties of the Si (1 1 1) decorated with Ni nanostructures deposited by nanospherical lithography. The height of the nickel nanostructure deposited was about 25 nm, while the area taken by the structure differed depending on the type of matrix used. It was found that the Ni nanostructures change the velocity of both bulk and surface phonons in the systems studied. This finding is in contradiction to the results concerning the surface phonons velocities in different media covered with a homogenous thin metal film, in which the effect was observed for films thicker than 70 nm.     

Insight into chain dimensions in PEO/water solutions

Small‐Angle Neutron Scattering has been performed from poly(ethylene oxide) in deuterated water at temperature ranging from 10 to 80 °C. A simple fitting model was used to obtain a correlation length and a Porod exponent. The correlation length L characterizes the average distance between entanglements in the semidilute region and is proportional to the individual coil sizes in the dilute region. L was found to increase with temperature in the semidilute region but it decreases with temperature in the dilute region. This decrease is the precursor to the single‐chain collapse which applies to very dilute polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2196–2200, 2007     

On acoustic and electric waves diffraction in piezoelectric medium by a permeable half-plane crack

The problem of electric and acoustic waves diffraction by a half-plane crack in a transversal isotropic piezoelectric medium is investigated. The crack is assumed to be electric permeable and free of tractions. The so-called “quasi-hyperbolic approximation” [15] is adopted. Applying Laplace transformations and Wiener–Hopf technique a closed form solution is obtained. By the means of Cagniard–de Hoop method a detailed dynamic full electroacoustic wavefield’s investigation is conducted. Mode conversion between electric and acoustic waves, effect of electroacoustic head wave, Bleustein–Gulyaev surface wave and the wavefield structure depending on the type of the incident wave (acoustic or electric) and its angle of incidence are analyzed in details. The dynamic field intensity factors at the crack tip depending on the angle of incidence and on time are derived explicitly. Numerical analysis is presented.     

利用喇曼光谱测量氧碘化学激光器氯气利用率的实验研究

 介绍了利用自发喇曼散射光谱测量氧碘化学激光器单态氧发生器氯气利用率的原理及实验装置，并给出了在以氮气作为稀释气的0.1mol/s射流式氧发生器上测试的结果，测试相对误差小于12%。由于该方法只需要通过测量喇曼谱线相对强度之比，即可算出氯的利用率，因此不需要另外的标定实验，从而避免了因标定带来的影响。该方法减小了测试误差，简化了实验过程，提高了测试效率。     

含腔电大尺寸导体目标电磁散射的一体化数值模拟

应用等效原理，通过引入口面上等效磁流将含腔导电目标电磁散射简化为腔内、外两个等效 问题. 腔内问题分段求解并应用级联法获得口面等效导纳矩阵；腔内外的耦合关系应用近似 边界元方法描述并由此获得口面等效磁流；最后，这一具有混合源的腔体内外一体化散射问 题则应用所提出的广义混合场积分方程方法建立电磁模型，并用多层快速多极子方法实现高 效数值求解. 实例计算结果与测试结果具有很好的一致性. 关键词： 含腔目标 电磁散射 混合场积分方程 数值分析     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

Scattering from infinite rough tubular surfaces

We study the Helmholtz equation in the exterior of an infinite perturbed cylinder with a Dirichlet boundary condition. Existence and uniqueness of solutions are established using the variational technique introduced (SIAM J. Math. Anal. 2005; 37 (2):598–618). We also provide stability estimates with explicit dependence of the constants in terms of the frequency and the perturbed cylinder thickness. Copyright © 2006 John Wiley & Sons, Ltd.     

Electron-confined LO-phonon scattering in GaAs-Al0.45Ga0.55As superlattice

We develop a theoretical model to the scattering time due to the electron-confined LO-phonon in GaAs-Al_xGa_1-xAs superlattice taking into account the sub-band parabolicity. Using the new analytic wave function of electron miniband conduction of superlattice and a reformulation slab model for the confined LO-phonon modes, an expression for the electron-confined LO-phonon scattering time is obtained. In solving numerically a partial differential equation for the phonon generation rate, our results show that forx = 0.45, the LO-phonon in superlattice changes from a bulk-like propagating mode to a confined mode. The dispersion of the relaxation time due to the emission of confined LO-phonons depends strongly on the total energy.     

Characterization of spherical particles using high-order neural networks and scanning flow cytometry

We retrieve the radius R, real n and imaginary k parts of the refractive index of homogeneous spherical particles using angular distribution of the light-scattering intensity. To solve the inverse light-scattering problem we use a high-order neural-network technique. The effect of network parameters on optimization is examined. The technique is evaluated for noise-corrupted input data at 0.6 μm<R<10.6 μm, 1.02<n<1.38, and 0<k<0.03. The errors of retrieval for nonabsorbing particles do not exceed 0.05 μm for radius and 0.015 for refractive index. The experimental verification is fulfilled by experimental data retrieved by means of a scanning flow cytometer. The light-scattering profiles of polystyrene beads and spherized red blood cells are processed with the high-order neural networks and a non-linear regression at Mie theory. The parameters retrieved by the high-order neural networks correlate well with the parameters retrieved by the least-square method.