热处理对V-4Ti合金氦的滞留与热解吸行为的影响

钒合金由于其低中子诱导的放射性和良好的高温性能被认为是未来聚变堆很有希望的第一壁和结构材料。因为氦可以通过放电清洗和中子嬗变产生，氦的滞留与热释放行为将是钒合金在聚变堆应用的重要课题。A．V．Veen领导的研究小组用1keV的氦离子注入到10^13-10^14He／cm^2的剂量研究了钒合金的氦俘获和热解吸机理以及预退火处理的影响。两群热解吸峰被发现，他们认为一个对应于氦，空位一杂质链，另一个对应于氦，带有钒合金原有的缺陷，如细小的析出物所俘获。既然钒合金原有的缺陷与退火处理有关，热处理对氦在钒合金中的滞留的影响是可以预期的，并且已被实验所证实。     

NEPCⅡ新电子枪热结构分析与测试

北京正负电子对撞机重大改造工程(BEPCⅡ)要求其直线注入器提供更高的能量和流强, 为此必须设计大电流和小发射度的新电子枪, 以提高正电子的产额. 利用ANSYS对BEPCⅡ新电子枪的温度场分布及结构的热变形进行了模拟分析. 对于电子枪复杂的内部结构形态以及能量转换方式, 分析了传导传热方式对温度场的影响. 在此基础上进行了温度场与结构变形的耦合分析, 利用EGUN对电子枪形变前后束流光学特性进行模拟分析, 并对模拟结果与试验 测试结果进行了分析比较.     

Tokamak Experiment and Tokamak Engineering——Development of the Plasma Diagnostics on HL-2A Tokamak

The main mission the HL-2A tokamak is of the experiments on to explore the divertor physics and to investigate the plasma confinement, transport and instabilities with high power auxiliary heating and advanced fuelling, it is necessary to develop more new diagnostics and increase the spatial and temporal resolutions of the measurements for exist system. Up to now, about 30 diagnostic systems have been moved from HL-1M to HL-2A tokamak. Other 10 diagnostic systems are being designed and installed on the device. In developed in last 2 years, will be presented.     

The First Results of Supersonic Molecular Beam Injection in the HL-2A Tokamak

HL-2A tokamak, the first tokamak with divertor in China, has been constructed and put into operation in 2002. The main parameters are R=1.65 m, a=0.4 m, BT=2.8 T, Ip = 0. 48 MA. The divertor of HL-2A is unique, because it is characterized with a large closed divertor chamber. The device has double divertor chamber, but now it is operating with lower single null configuration to study the physics of divertor for the next step design of a divertor. Supersonic molecular beam injection （SMBI） system with LN2 cooling trap was first installed and demonstrated on the HL-2A tokamak in 2004. The first results of SMBI into HL-2A plasma are to demonstrate the function of the HL-2A divertor and to observe the cold pulse propagation during multi-pulse SMBI on HL-2A Tokamak.     

Ca(NO3)2•4H2O-catalysed Biginelli Reaction: One-pot Synthesis of 1,2,3,4-Tetrahydropyrimidin-2-ones/pyrimidine-2-thiones under Solvent-free Conditions

The synthesis of 1,2,3,4-dihydropyrimidinone/thione derivatives was achieved in good to excellent yields using calcium(II) nitrate as catalyst to promote the Biginelli three-component condensation reaction from a diversity of aromatic aldehydes, β-keto compounds and urea or thiourea. The reaction was carried out under solvent-free conditions.     

q←q~(-1)对称的非广延熵描述下的正则玻色子系综

将Abe引入的q q-1对称变形熵应用于玻色子的正则系综,根据最大熵原理和Lagrange乘子法,导出了系统的密度算子,进而在微变形的条件下求出了粒子数算符的期望值及其在高温、低温下的近似值。     

纳米Mg-Ni合金的制备技术

纳米Mg-Ni贮氢材料具有成本低，活化容易、贮氢容量大，吸放氢动力学性能优异等特点，有很大的应用前景。本文用机械合金化法进行了纳米Mg-Ni合金的制备，且对制备的粉末进行了XRD，TEM，SEM等微观结构的分析。     

Time—Resolved Photoluminescence Studies of AlInGaN Alloys

We study the two samples of AlInGaN,i.e.,1-μm Gan grown at 1030℃ on the buffer and followed by a 0.6μm-thick epilayer of AlInGaN under the low pressure of 76 Torr and the AlInGaN layer deposited diectly on the buffer layer without the high-temperature GaN layer,by temperature-dependent photoluminescence(PL) spectroscopy and picosecond time-resolved photoluminescence(TRPL) spectroscopy.The TRPL signals of both the samples were fitted well as a stretched exponential decay at all temperatures,indicating significant disorder in the material.We attribute the disorder to nanoscale quantum dots or discs of high indium concentration.Temperature dependence of dispersive exponent β shows that the stretched exponential decay of the two samples comes from dfferent mechanisms.The different depths of the localization potential account for the difference,which is illustrated by the results of temperature dependence of radiative recombination lifetime and PL peak energy.     

Hg1-xCdxTe/Cd1-zZnzTe的X射线反射率及半峰全宽的动力学研究

X射线衍射摇摆曲线的计算机模拟是一种获得材料晶体质量参量的有效方法，其中材料本征摇摆曲线的计算是计算机模拟的基础。用X射线动力学理论计算了Hg1-xCdxTe和Cd1-zZnzTe本征反射率曲线，并研究了组分、膜厚分别对本征反射率和半峰全宽的影响。结果表明Hg1-xCdxTe和Cd1-zZnzTe的本征反射率和半峰全宽与材料组分和厚度有明显的依赖关系，且该依赖关系取决于X射线在材料中的散射和吸收的相对强弱。薄膜的厚度也是直接影响本征摇摆曲线峰形、半峰全宽和反射率的重要因素，当薄膜厚度小于穿透深度时，表征本征反射率曲线的各个参量均与薄膜厚度有直接的关系。对于(333)衍射面，碲镉汞材料厚度大于7μm后，本征反射率和半峰全宽将不再发生明显变化。