Thermal behaviour of new N,N-dimethylbiguanide complexes having selective and effective antibacterial activity

The complexes of the type M(HDMBG)₂(CH₃COO)₂·nH₂O ((1) M:Mn, n=1.5; (2) M:Ni, n=0; (3) M:Cu, n=2; (4) M:Zn, n=2; DMBG: N,N-dimethylbiguanide) present in vitro antimicrobial activity. The thermal analysis has evidenced the thermal intervals of stability and also the thermodynamics effects that accompany them. The different nature of the ligands generates a different thermal behaviour for the complexes. The thermal transformations are complex processes according to TG and DTG curves including dehydration, oxidative condensation of –C=N– units as well as thermolysis processes. The final products of decomposition are the most stable metal oxides.     

Resistance properties of a macroporous silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide-impregnated polymeric adsorption material against nitric acid, temperature and γ-irradiation

The resistance of a novel silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) polymeric adsorption material (TODGA/SiO₂-P) against nitric acid, temperature and γ-irradiation had been investigated. The adsorption property of the treated TODGA/SiO₂-P was evaluated by a 3 M HNO₃ solution containing 0.01 M Nd(III). It was found that both 3 and 0.01 M HNO₃ concentrations did not decrease the stability of TODGA/SiO₂-P at 25°C. The quantity of TODGA leaked from TODGA/SiO₂-P was equivalent to its solubility in the corresponding HNO₃ aqueous solution. The effect of 3 M HNO₃ on the leakage of TODGA at 80°C was significantly higher than that in 0.01 M HNO₃ as well as in all cases at 25°C. The amount of Nd(III) adsorbed towards the treated TODGA/SiO₂-P was determined in the range of 0.143–0.148 mmol/g for the HNO₃ concentration effect and 0.142–0.0506 mmol/g for the temperature effect. γ-Irradiation showed a more noticeable destruction effect on TODGA/SiO₂-P. The content of TODGA leaked increased with an increase in the γ-irradiation dose (ID) from 1.06 to 3.72 MGy in terms of the linear equation [TODGA]=794.5ID+84.0. The amount of Nd(III) adsorbed onto the irradiated TODGA/SiO₂-P decreased rapidly from 0.134 to 0.0438 mmol/g, which was lower than 0.153 mmol/g, the adsorption of fresh TODGA/SiO₂-P for Nd(III), according to the equation Q_Nd(III)=−0.0301ID+0.160, showing that a large quantity of TODGA leaked from TODGA/SiO₂-P. The adsorbed amount of Nd(III) decreased obviously in this order: the HNO₃ concentration effect, temperature effect and γ-irradiation.     

The electron microscope characterization of the fine structure of nylon 6: II. On the rearrangement of the structure during cold-drawing

The transmission electron microscope (TEM) visualization of the supermolecular structure of cold-drawn, oriented nylon 6 bulk material (bristles) by stained ultra-thin sections is reported. For evaluating the electron micrographs optical diffraction (OD) has been applied in comparison with small angle X-ray scattering (SAXS). The deformation of the spherulites was followed by polarization microscopy. In addition, investigations were carried out on commercial nylon 6 fibres. As the main result a transverse structure was revealed within the drawn samples at draw ratios between =4 and 4.5, consisting of mosaic crystals which show some lateral alignment. The structure is described by a modified layer lattice model. While the long period may increase slightly during drawing, the crystallite thickness remains almost constant. Fibres with =3.4 show a similarly oriented structure though the lateral alignment of the crystals is not so pronounced.     

Multianvil high-pressure/high-temperature preparation, crystal structure, and properties of the new oxoborates Dy4B6O14(OH)2 and Ho4B6O14(OH)2

This paper reports about two new hydrogen-containing rare-earth oxoborates RE₄B₆O₁₄(OH)₂ (RE=Dy, Ho) synthesized under high-pressure/high-temperature conditions from the corresponding rare-earth oxides, boron oxide, and water using a Walker-type multianvil equipment at 8 GPa and 880 °C. The single crystal structure determination of Dy₄B₆O₁₄(OH)₂ showed: Pbcn, a=1292.7(2), b=437.1(2), , Z=2, R1=0.0190, and wR2=0.0349 (all data). The isotypic holmium species revealed: Pbcn, a=1292.8(2), b=436.2(2), , Z=2, R1=0.0206, and wR2=0.0406 (all data). The compounds exhibit a new type of structure, which is built up from layers of condensed BO₄-tetrahedra. Between the layers, the rare-earth cations are coordinated by 7+2 oxygen atoms. Furthermore, we report about temperature-resolved in situ powder diffraction measurements, DTA/TG, and IR-spectroscopic investigations into RE₄B₆O₁₄(OH)₂ (RE=Dy, Ho).     

Calorimetric study of room temperature adsorption of N2O and CO on Cu(II)-exchanged ZSM5 zeolites

Copper ion-exchanged ZSM5 zeolites have been prepared with different cooper loadings from under- to over-exchanged levels. The adsorptions of N₂O and CO at 303 K have been studied using calorimetric method and infrared spectroscopy. The samples were additionally characterised by ammonia adsorption at 423 K. The active sites for both N₂O and CO are Cu(I) ions, which were formed as a result of pre-treatment in vacuum at 673 K.

Room temperature adsorption of nitrous oxide at low equilibrium pressures (up to 66.7 Pa) resulted in small amounts of chemisorbed N₂O (<0.2 molecule per one Cu ion). Differential heats of N₂O adsorption between 80 and 30 kJ/mol were obtained. Differential heats of CO adsorption between 140 and 40 kJ/mol were obtained. The obtained amounts of chemisorbed species in the investigated systems and the values of differential heats of both nitrous oxide and carbon monoxide demonstrate the dependence on the copper content.     

Structures and energetics of C3H6S isomers: a Gaussian-3 ab initio study

Twenty-two isomers/conformers of C₃H₆S^+√ radical cations have been identified and their heats of formation (ΔH_f) at 0 and 298 K have been calculated using the Gaussian-3 (G3) method. Seven of these isomers are known and their ΔH_f data are available in the literature for comparison. The least energy isomer is found to be the thioacetone radical cation (4⁺) with C_2v symmetry. In contrast, the least energy C₃H₆O^+√ isomer is the 1-propen-2-ol radical cation. The G3 ΔH_f298 of 4⁺ is calculated to be 859.4 kJ mol⁻¹, ca. 38 kJ mol⁻¹ higher than the literature value, ≤821 kJ mol⁻¹. For allyl mercaptan radical cation (7⁺), the G3 ΔH_f298 is calculated to be 927.8 kJ mol⁻¹, also not in good agreement with the experimental estimate, 956 kJ mol⁻¹. Upon examining the experimental data and carrying out further calculations, it is shown that the G3 ΔH_f298 values for 4⁺ and 7⁺ should be more reliable than the compiled values. For the five remaining cations with available experimental thermal data, the agreement between the experimental and G3 results ranges from fair to excellent.

Cation CH₃CHSCH₂^+√ (10⁺) has the least energy among the eleven distonic radical cations identified. Their ΔH_f298 values range from 918 to 1151 kJ mol⁻¹. Nevertheless, only one of them, CH₂=SCH₂CH₂^+√ (12⁺), has been observed. Its G3 ΔH_f298 value is 980.9 kJ mol⁻¹, in fair agreement with the experimental result, 990 kJ mol⁻¹.

A couple of reactions involving C₃H₆S^+√ isomers CH₂=SCH₂CH₂^+√ (12⁺) and trimethylene sulfide radical cation (13⁺) have also been studied with the G3 method and the results are consistent with experimental findings.     

The formation of 1,2,4-triazolylimidazolidine-2,4-diones in reactions of 3-aryl-1,2,4-triazin-5(2H)-ones with alkylureas

Recyclization of the addition products of alkylureas to 3-aryl-1,2,4-triazin-5(2H)-ones affording 1,2,4-triazole derivatives was found to occur in Ac₂O.     

Mass spectrometer-wall probe diagnostic of Ar discharges containing SF6 and/or O2: Reactive ions in etching plasmas

Positive and negative ions of Ar/SF₆ and Ar/SF₆/O₂ plasmas (etching plasmas) and of Ar/O₂ plasmas (cleaning plasmas) in Pyrex tubes have been investigated using a mass spectrometer-wall probe diagnostic technique. The measurement of negative ions proved to be a very sensitive method for the detection of wall material. In etching plasmas with small admixtures of SF₆, oxygen was found as the only representative of wall material. At larger amounts of SF₆, silicon could be detected. In cleaning plasmas with small admixtures of O₂ applied to a previously etched Pyrex surface, fluorine was found, indicating the reversal of fluoridation by oxygenation.