Ce3+-冠醚配合物的紫外有机电致发光

采用5d-4f跃迁的稀土Ce³⁺-冠醚配合物(Ce-二环己基并-18-冠-6,Ce-DC18C6)作为发光掺杂剂,4,4'-二(9-咔唑基)联苯(CBP)为基质,设计制备了紫外发光器件:ITO/CuPc/Ce-DC18C6:CBP/Bu-PBD/LiF/Al,首次观测到峰位于376nm的Ce³⁺离子的紫外电致发光。通过对比器件的EL谱与Ce³⁺-冠醚配合物薄膜的PL谱发现,EL光谱中有部分来自Ce³⁺配合物中的Ce³⁺离子的。这种5d-4f电子跃迁的掺杂质量分数为3%时,该UV-发光器件的最大辐射功率为13μW/cm²。     

Enhanced Raman Scattering by Quasi-phase-matched Processes in ax^（2） Photonic Crystal

An intense comb-shaped Raman spectra were obtained from a two-dimensional nonlinear x（2） photonic crystal - a hexagonally poled LiTaO3 crystal with lattice parameter 9 micros. The lowest Raman shift was down to 2 cm^-1 and the order of anti-stokes and stokes signals both achieved 11. The novel Raman spectra were mediated first by intense phonon-polariton fields, which were driven through the quasi-phase-matched coupling between the incident dual-beam both from an optical parametric oscillation laser, and further amplified greatly also by such quasi-phasematched nonlinear optical process. The dependence of the Raman spectra character on the wavelength and intensity of incident beams were studied in detail, which accordingly revealed information of the inelastic scattering and the elementary excitation in the nonlinear medium. These results on the other hand suggest technological importance for developing a novel Raman laser with the multi-wavelength output and a tunable frequency interval and for possible applications in quantum optics.     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。     

金刚石窗口冷却Yb3+∶YAG DPSSL设计

针对高功率二极管重复率抽运的V型非稳腔Yb3+∶YAG激光头，提出了利用金刚石窗口冷却和直接水冷相结合的复合冷却设计.在YAG片的抽运面进行直接水冷，同时在激光提取面利用金刚石窗口冷却介质.金刚石优异的导热性能不仅能够有效地冷却激光介质，还能消除横向的温度梯度，解决了高功率激光器冷却和高功率抽运的矛盾.模拟结果表明对掺杂10 at %厚度为1.6 mm的Yb3+∶YAG片在抽运功率密度为20 kW/cm2，重复频率为10 Hz的条件下，要将最高温度控制在可接受的范围内（比如320 K），周围冷却水的对流换热系数约为4000 W/m2K.     

Gd3+对Ca0.8Zn0.2TiO3:Pr3+红色发光材料的敏化作用

采用溶胶-凝胶法在较低温度下合成了红色发光材料Ca0.8Zn0.2TiO3:0.002Pr3 ,xGd3 .金属离子预先溶解含有柠檬酸的乙二醇溶液中.XRD表明在800℃灼烧2h形成了钛酸盐的晶体.荧光检测结果表明所合成样品的特征激发峰为330nm、特征发射峰为614nm,分别对应于O(2p)→Ti(3d)带间跃迁和Pr3 的1D2→3H4的特征发射.样品的发光强度随x的不同而不同,发光强度增强了29%-69%.当x＝0.0005时,即nPr3 :nGd3 ＝4∶1时样品的红色发光强度最强,发光强度增强了69%.     

2,3-二羟基萘钼多酸有机衍生物的合成及1H NMR和IR谱学研究

本文对二种新合成的2，3－二羟基萘二钼和四钼多酸有机衍生物[n-Bu)4N]2[Mo2O5(OC10H6O)2](Ⅰ）和[n-Bu)4N]2[Mo4O10(OC10H6O)2(OCH3)2](Ⅱ)进行了红外光谱与核磁共振波谱研究，发现[Mo2O5]^2 中钼氧多桥键的红外振动频率较[Mo4O10(OCH3)2]^2 中钼氧多桥键的红外振动频率红移，而在配合物Ⅱ中2，3－二羟基中芳环的^1H化学位移较配合物Ⅰ中向低场移动。同时还发现含二钼配位中心[Mo2O5]^2 的[Mo2O5(OC10H6O)2]^2-与含四钼配位中心[Mo4O10(OCH3)2]^2 的[Mo4O10(OC10H6O)2(OCH3)2]^2-生成条件的差异仅仅只在反应体系的pH值的微小变化，说明钼多酸有机衍生物阴离子是对体系酸碱度极为敏感的物质。     

稀土氟化物Y0.97Er0.03F3纳米材料的制备及上转换发光

通过燃烧法和控温热反应法制备了稀土氟化物纳米材料，利用XRD和TEM对样品进行了分析和表征。测量了发射波长为980nm激光二极管激发下所得纳米材料的上转换发光性质。     

利用有限几何构作3-PBIB（2）设计和3-设计

The concept of t-PBIB design was introduced by Wei Wandi and Yang Benfu as a generalization of G-design and PBIB design. In this paper, a number of 3-associntion schemes and 3-PBIB(2) designs are constructed on the bases of the finite vector space over Fq and the finite unitary geometry over Fq2. Then a number of 3-designs are constructed on the bases of the finite orthogonal geometries over Fq. The parameters of all these designs are computed.