热变形奥氏体静态再结晶行为的研究

本文利用双道次压缩的方法,在Gleeble1500热模拟实验机上研究了低碳钢SS400在变形间隔时间内奥氏体的软化行为,以便为制定合理的细化晶粒轧制工艺提供实验和理论基础.采用后插法计算了在不同真应变条件下的静态再结晶率.通过双道次压缩测试静态软化动力学实验的表明,实验钢变形后很容易发生静态软化.在真应变为0.4,0.2时,静态再结晶激活能分别是Qrec=189.3,179.2kJ/mol.     

静态顶空/气相色谱-质谱法同时测定化妆品中22种有毒挥发性有机溶剂残留

以2015版《化妆品安全技术规范》中规定的常见禁用及限用有毒挥发性有机溶剂为研究对象,建立了静态顶空/气相色谱-质谱法(SHS/GC-MS)同时测定化妆品中22种有毒挥发性有机溶剂(VOC)(二氯甲烷、顺式-1,2-二氯乙烯、反式-1,2-二氯乙烯、2-氯-1,3-丁二烯、三氯甲烷、1,2-二氯乙烷、苯、四氯化碳、三氯乙烯、甲苯、四氯乙烯、氯苯、乙苯、三溴甲烷、间二甲苯、对二甲苯、苯乙烯、邻二甲苯、异丙苯、1,4-二氯苯、1,2-二氯苯、六氯丁二烯)残留的检测方法。试样在80℃下30 min静态顶空,经DB-1柱分离后,采用选择离子监测模式(SIM)进行定性定量分析。优化了顶空、色谱和质谱参数,结果表明:22种VOC在0.5~50 ng/m L浓度范围内均呈良好的线性关系,相关系数均大于0.99,在1.0,2.0,5.0 ng/m L 3个浓度加标水平下的平均回收率为80.3%~102.7%,相对标准偏差(RSD,n=6)为6.4%~9.9%,检出限为0.2~5.0 ng/g。结果表明,该方法简便、灵敏、准确,具有良好的重现性和稳定性,适合于化妆品中22种VOC残留的筛查和确证检测。     

AOT/水/甲苯微乳体系的第二维里系数和液滴间的相互作用

在一系列温度下通过对水与丁二酸双(2-乙基己基)酯磺酸钠(AOT)摩尔比为12、不同浓度的AOT/水/甲苯微乳液进行静态光散射测量, 获得液滴的相对分子质量、AOT的聚集数、液滴半径和不同温度下的第二维里系数. 利用第二维里系数与温度的关系获得液滴的相互作用焓和熵, 分别为-4.03×10⁴ J·mol^-1和-139.8 J·mol^-1·K^-1, 说明AOT/水/甲苯微乳液滴间表面活性剂疏水链相互交叉渗透的能量变化为负值, 交叉渗透为焓驱动.     

Tesla微混合器结构参数对混合强度的影响

针对Tesla微混合器混合原理,利用计算流体力学(CFD)模拟与分析软件对其进行了三维数值模拟.模型采用有限体积法离散、SIMPLEC算法进行层流计算.分析了结构参数的改变对该混合器混合效果的影响,并采用混合强度值作为衡量指标.分析结果显示,不同通道高宽比和分离通道入流角度等结构参数对该微混合器的混合效果有重要影响.模...     

The supply voltage scaled dependency of the recovery of single event upset in advanced complementary metal-oxide-semiconductor static random-access memory cells

Using computer-aided design three-dimensional simulation technology,the supply voltage scaled dependency of the recovery of single event upset and charge collection in static random-access memory cells are investigated.It reveals that the recovery linear energy transfer threshold decreases with the supply voltage reducing,which is quite attractive for dynamic voltage scaling and subthreshold circuit radiation-hardened design.Additionally,the effect of supply voltage on charge collection is also investigated.It is concluded that the supply voltage mainly affects the bipolar gain of the parasitical bipolar junction transistor(BJT) and the existence of the source plays an important role in supply voltage variation.     

Mechanical properties of jammed packings of frictionless spheres under an applied shear stress

By minimizing a thermodynamic-like potential, we unbiasedly sample the potential energy landscape of soft and frictionless spheres under a constant shear stress. We obtain zero-temperature jammed states under desired shear stresses and investigate their mechanical properties as a function of the shear stress. As a comparison, we also obtain the jammed states from the quasistatic-shear sampling in which the shear stress is not well-controlled. Although the yield stresses determined by both samplings show the same power-law scaling with the compression from the jamming transition point J at zero temperature and shear stress, for finite size systems the quasistatic-shear sampling leads to a lower yield stress and a higher critical volume fraction at point J. The shear modulus of the jammed solids decreases with increasing shear stress. However, the shear modulus does not decay to zero at yielding. This discontinuous change of the shear modulus implies the discontinuous nature of the unjamming transition under nonzero shear stress, which is further verified by the observation of a discontinuous jump in the pressure from the jammed solids to the shear flows. The pressure jump decreases upon decompression and approaches zero at the critical-like point J, in analogy with the well-known phase transitions under an external field. The analysis of the force networks in the jammed solids reveals that the force distribution is more sensitive to the increase of the shear stress near point J. The force network anisotropy increases with increasing shear stress. The weak particle contacts near the average force and under large shear stresses it exhibit an asymmetric angle distribution.     

透明导电玻璃(ITO)基材自加热传感静态芯片聚合酶链反应(PCR)

利用商品化ITO玻璃导电层的温阻效应, 无需任何微加工手段, 实现了自加热和传感的芯片温度自动程序控制, 最大程度地减小了传感滞后对温度控制稳定性的影响, 温度控制的稳定性达到了0.2 ℃, 升温速度最快可达20 ℃/s以上, 在冷却风扇辅助下降温速度最快达到了8 ℃/s. 芯片温控单元的引线从传统的两对(一对用于传感, 一对用于加热)减少为一对. 通过在该芯片上直接构建多个开放微池反应器的方法成功地实现了λDNA 157 bp片段的并行扩增. 将该芯片置于倒置荧光显微镜样品台上, 以蓝色(575 nm)发光二极管为光源, 以光电倍增管为检测手段检测了dsDNA和SYBR Green Ⅰ嵌合物的荧光强度随温度的实时变化曲线.     

基于CSP工艺铽对Q345B再结晶的影响

以CSP工艺生产的Q345热轧钢板为研究对象,采用Gleeble-1500D热模拟实验机进行单、双道次轧制模拟实验,研究了稀土铽(Tb)对Q345B钢再结晶行为的影响.结果表明,稀土铽(Tb)能够明显地推迟Q345B钢的动态再结晶,使对应峰值应力在低温轧制时提高约10%,而对980℃以上时的峰值应力影响不明显;980℃以上轧制时,稀土铽(Tb)能够明显的降低间隔时间1.5 s时的静态软化率,但随间隔时间的增加,稀土铽(Tb)对静态软化率的影响减弱;加入稀土铽能够提高完全再结晶区温度,扩大部分再结晶区.     

热线法测定气体导热系数实验的探讨与改进

在准静态低气压下测量气体的热传导系数时，理论上在低压强范围内应得到Q^-1低-p^-1线性关系图象，但实验数据所绘出的图象出现明显的非线性．本文着重分析出现非线性的原因，并提出实验改进的方法。