热喷涂技术的现状和发展

介绍了热喷涂工艺的特点，喷涂方法的种类及其技术以及热喷涂技术的应用概况，并对热喷涂技术的发展方向给予了展望。     

一种具有光开关功能的分子材料—光致自旋转换配合物

配合物分子材料的研究是对传统无机和有机材料的一种新发展和挑战．光致自旋转换配合物可望是实现光开关和记录信息的理想体系．     

一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

超磁致伸缩材料国际会议情况介绍

日本高科技协会，于1996年11月6日-8日在美国夏威夷火努鲁鲁的日本东海大学太平洋中心组织召开了稀土超磁致伸缩材料基础和应用研究的国际会议．超磁致伸缩材料GMM（GiantManetostrictiveMa．tenals）为稀土元素钛Tb（Terbium）、镐Dy（DysPro－sium）和铁Fe的合金化合物，其基     

光功能纳米陶瓷材料研究取得重要成果

~~光功能纳米陶瓷材料研究取得重要成果@汪道友~~     

激光致晶态Ag11In12Te26Sb51相变介质光学常量的研究

研究了结晶度对Ag11In12Te26Sb51相变薄膜光学常数的影响。用初始化仪使相变薄膜晶化，改变晶化参量得到不同的结晶度，当转速固定时，随激光功率的增加，折射率基本随之减小，消光系数先是增大，而后减小；当激光功率固定时，随转速的增大，折射率也随之增大，消光系数也是先增大后减小。非晶态与晶态间的变换、薄膜微结构的变化（包括晶型的转变和原子间键合状态的变化）以及薄膜内残余应力的影响Ag11In12Te26Sb51相变薄膜复数折射率的主要原因。测量了单层膜的透过率和CD－RW相变光盘中Ag11In12Te26Sb51薄膜非晶态和晶态的反射率。     

Solutions for a Mode Ⅲ Growing Crack in a Piezoelectric Plane Under Two Kinds of Electric Boundary Conditions ＊

The solutions for a mode Ⅲ crack growing along an arbitrary propagation path in a piezoelectric plane are studied under the impermeable surface condition and the electrical contact surface condition respectively. According to the two kinds of electric boundary conditions, the Hilbert and Riemann boundary value problems in a half-plane including opening smooth arc are obtained from the theoretical analysis. Moreover, the equipollence of the solution formed under these two electric boundaries is proved, and unified solutions for the stress and electric displacement distribution in the crack-tipfield of the piezoelectric plane are achieved.     

High—Efficiency Organic Double—Quantum—Well Light—Emitting Devices Using 5,6,11,12—Tetraphenylnaphthacene Sub—monolayer as Potential Well

The double-quantum-well organic light-emitting devices of indium-tin-oxide (ITO)/NPB (50nm)/rubrene (0.05nm)/NPB (4nm)/rubrene (0.05nm)/Alq3 (50nm)/LiF (0.5nm)/Al were fabricated, in which N,N-bis-(1-naphthyl)-N,N‘-diphenyl-1,1‘-biphenyl-4,4‘‘‘‘‘‘‘‘-diamine (NPB) is used as a barrier potential or hole transport layer, tris (8-hydroxyquinoline) aluminium (Alq3) used as electron transport layer, and 5,6,11,12-tetraphenylnaphthacene (rubrene) as a potential well and emitter. The brightness can reach 18610cd/m^2 at 13V. The maximum electroluminescent efficiency of the device was 6.61cd/A at 7V, which was higher than that of common dope-type devices. In addition, the electroluminescence efficiency is relatively independent of the drive voltage in the range from 5 to 13V.