Determination of Gossypol in Trace Level by Flow Injection Analysis with Chemiluminescence Detection

Gossypol, [1, 1′, 6, 6′, 7,7′-hexahydroxyl-5,5′-diisopropyl-3,3′-dimethyl-(2,2′-binaphtha- lene)-8,8′-dicarboxaldehyde] is a polyphenolic yellow compound naturally occurring in various parts of cotton plants1. The compound has been associated with     

β-蒎烯和马来酸酐的反应及产物表征

研究了β-蒎烯和马来酸酐的烯反应、溶剂中自由基共聚反应和本体热共聚反应,得到了β-蒎烯和马来酸酐烯反应产物和共聚产物,并用IR、1H NMR、13C NMR、GPC、DSC进行表征,研究了引发剂浓度、溶剂体系、单体配比、温度等因素对产物的影响.对聚合物进行皂化改性,测量了皂化物浓度对水表面张力的影响.     

A Home-made Simple Set-up for Measurement of Electrochemical Surface Tension Spectrum on a Mercury Drop Electrode

A setup for recording surface tension curves at a mercury drop during potential scanning is designed based on photo-sensitive detection system. Surface tension spectrum at Hg drop can be recorded by voltammetric study. A Yb(III)-NO2- catalytic reduction system was used for characterization. The simple, sensitive technique can be expected to provide fresh information on molecular interactions at electrode surfaces.     

Development of an RPLC-based Method for Measurement of Indoprofen Stability and Validation of the Method

A method for quantitative measurement of the photochemical decomposition of the anti-inflammatory agent, indoprofen （INP） is descriped. An RPLC-based assay that could determine the extent of degradation of INP in a rapid, sensitive, and accurate manner was developed. The method was validated under photoirradiation. Quantitation was monitored with an Inertsil ODS-3V column using a mobile phase of acetonitril and 1% HOAc solution in deionized H2O. Statistics relevant to the system criteria, peak integrity and resolution among the parent drug and its degradation products were performed. From the intra- and inter-day tests, the coefficients of variation were found to range from 0.59% to 4.25% for the former and from 0.71% to 4.86% for the latter. The good selectivity and specificity of this RPLC-based procedure render it suitable for measurements of INP stability.     

粘度国家基准装置测量结果的不确定度

分析粘度国家基准装置测量结果不确定度的来源并进行评定。影响粘度国家基准装置测量不确定度的主要因素有温度、时间、表面张力、空气浮力以及动能修正等。根据2002年粘度国家基准量值复测的结果，以及改造后新基准装置和辅助设备的状态，计算得粘度国家基准装测量结果的扩展不确定度为0.038%-0.4%。     

pH_S-3C型数字酸度计的改进

介绍了pHS- 3C型数字酸度计存在的问题及改进措施     

溶剂蒸气对聚对苯二甲酸乙二酯作用的差示扫描量热研究

用差示扫描量热(DSC)研究了几种有机溶剂蒸气对聚对苯二甲酸乙二酯(PET)的作用,表明可分为反应性的和非反应性的两种。同时,对于非反应性的作用,依冷结晶峰面积的变化,又可分为三种类型:冷结晶峰面积不变,经诱导期后下降,无诱导期而迅速下降。双冷结晶峰现象在一些非反应性溶剂处理过的PET试样的DSC曲线也观察到。     

纸带-光纤技术对硫化氢气体测量的初探

以研制的光导纤维反射分光光度计为仪器,建立了根据浸渍醋酸铅的纸带与硫化氢反应生成黑色硫化铅斑点而改变纸带相对反射率,达到对H2S测量的新方法。测量波长为450nm,测量H2S浓度范围为5×10-8mol/L～1.35×10-6mol/L。方法可用于测量废气中的硫化氢。     

怎样发现你是否缺乏微量元素(一)

当你对微量元素的知识稍有了解后，一定很想知道自己是否存在某类必需微量元素缺乏，或发现了自己有身体上的不适，很想知道这是否与缺乏某类微量元素有关。解决这个问题最简单的办法就是去设有微量元素门诊的医院就诊，通过医生的问诊初步断定你的身体微量元素状况，并抽取你的血液或剪一点你的头发去做仪器测量分析，以分析结果来确诊你是否存在某类微量元素的缺乏，并辅之以药物治疗。     

尼龙－1010的聚集态结构

用ＷＡＸＤ、ＤＳＣ、方差－范围函数．密度测量等方法，研究了经不同热处理的尼龙－１０１０的聚集态结构．发现退火处理更有利于尼龙－１０１０结晶的生成和稳定，且尼龙－１０１０的结晶，有一个最佳的热处理温度．在该温度附近，尼龙－１０１０的结晶度和微晶尺寸里最大值．