LOCAL BENDING OF THIN FILM ON VISCOUS LAYER

Effects of deposition layer position film are systematically investigated. Because the and number/density on local bending of a thin deposition layer interacts with the thin film at the interface and there is an offset between the thin film neutral surface and the interface, the deposition layer generates not only axial stress but also bending moment. The bending moment induces an instant out-of-plane deflection of the thin film, which may or may not cause the socalled local bending. The deposition layer is modeled as a local stressor, whose location and density are demonstrated to be vital to the occurrence of local bending. The thin film rests on a viscous layer, which is governed by the Navier-Stokes equation and behaves like an elastic foundation to exert transverse forces on the thin film. The unknown feature of the axial constraint force makes the governing equation highly nonlinear even for the small deflection chse. The constraint force and film transverse deflection are solved iteratively through the governing equation and the displacement constraint equation of immovable edges. This research shows that in some special cases, the deposition density increase does not necessarily reduce the local bending. By comparing the thin film deflections of different deposition numbers and positions, we also present the guideline of strengthening or suppressing the local bending.     

Stress field of orthotropic cylinder subjected to axial compression

Based on the constancy hypothesis of material volume, the circumferential and radial stresses of a cylinder specimen are analyzed when the cylinder is subject to a loading along the axial direction. The circumferential and radial stress distribution is a power function of radius parameter when the constitutive relation of specimen material is orthotropic. The stress distribution is a quadratic function of radius parameter for transversely isotropic material. Along the cylinder axial line, the circumferential and radial stresses are maximum and equal to each other. In the circumference boundary surface, the radial stress is zero and the circumferential stress value is minimal. The failure theory of maximum tensile circumferential strain is applied to calculate the critical axial loading. The circumference-boundary-layer failure criterion of orthotropic cylinders is described with the Hill-Tsai strength theory. The obtained strength theory is related to axial stress and mechanical properties of specimen material and to the specimen axialdeformation strain rate and the change rate of strain rate.     

Dynamic behaviour of axially moving nanobeams based on nonlocal elasticity approach

In this article, transverse free vibrations of axially moving nanobeams subjected to axial tension are studied based on nonlocal stress elasticity theory. A new higher-order differential equation of motion is derived from the variational principle with corresponding higher-order, non-classical boundary conditions. Two supporting conditions are investigated, i.e. simple supports and clamped supports. Effects of nonlocal nanoscale, dimensionless axial velocity, density and axial tension on natural frequencies are presented and discussed through numerical examples. It is found that these factors have great influence on the dynamic behaviour of an axially moving nanobeam. In particular, the nonlocal effect tends to induce higher vibration frequencies as compared to the results obtained from classical vibration theory. Analytical solutions for critical velocity of these nanobeams when the frequency vanishes are also derived and the influences of nonlocal nanoscale and axial tension on the critical velocity are discussed.     

基于结构两相阻力分析的泥石流堆积形态研究

针对泥石流的结构两相阻力特征,采用结构两相阻力对泥石流的堆积形态进行了静力学分析,推导出在一般条件下泥石流堆积形态的公式,并讨论了在不同条件下泥石流堆积形态的特点。分析表明采用结构两相阻力对泥石流堆积形态分析可以较合理的模化阻力项,能够表现泥石流体复杂的成分结构组成,较真实的反映实际泥石流的堆积形态特征。在特定材料条件下,结构两相阻力项转化为单一材料阻力项,所得到的相应结论与已有对单一材料的分析结论一致。     

轴向冲击载荷作用下弹性圆柱壳横向弯曲动态屈曲

研究在轴向冲击载荷下弹性圆柱壳动态屈曲问题.通过构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题.辛本征解反映了局部的压缩屈曲模态和整体的弯曲屈曲模态,特别是在冲击端为自由支承边界时的特殊屈曲方式.数值结果给出了具体的临界载荷和屈曲模态规律.     

简谐激励作用下轴向运动梁横向振动特性分析

为分析简谐激励作用下轴向运动梁的横向振动问题,采用单元数目及长度固定不变、节点参数在不同时间步下无缝传递的节点生死方法,建立了时变系统的动力学有限元模型,通过已有实例验证了模型的准确性和有效性。在此基础上,分析了架设速度、激励力频率和幅值对某型平推式军用桥梁架设过程横向动力响应的影响规律。结果表明,在架设过程中,当桥梁的时变固有频率与激励力频率接近时,桥梁位移动态响应呈共振的特点,据此提出了减小某型平推式军用桥梁架设过程动力响应的措施。     

ROTATIONAL RESISTANCE AND SHEAR-INDUCED ANISOTROPY IN GRANULAR MEDIA

This paper presents a micromechanical study on the behavior of granular materials under confined shear using a three-dimensional Discrete Element Method （DEM）. We consider rotational resistance among spherical particles in the DEM code as an approximate way to account for the effect of particle shape. Under undrained shear, it is found rotational resistance may help to increase the shear strength of a granular system and to enhance its resistance to liquefaction. The evolution of internal structure and anisotropy in granular systems with different initial conditions depict a clear bimodal character which distinguishes two contact subnetworks. In the presence of rotational resistance, a good correlation is found between an analytical stress-force-fabric relation and the DEM results, in which the normal force anisotropy plays a dominant role. The unique properties of critical state and liquefaction state in relation to granular anisotropy are also explored and discussed.     

磁场中轴向运动条形板强非线性超谐共振及混沌运动

针对磁场环境中周期外载作用下轴向运动导电条形板的非线性振动及混沌运动问题进行研究.应用改进多尺度法对横向磁场中条形板的强非线性振动问题进行求解,得到超谐波共振下系统的分岔响应方程.根据奇异性理论对非线性动力学系统的普适开折进行分析,求得含两个开折参数的转迁集及对应区域的拓扑结构分岔图.通过数值算例,分别得到以磁感应强度、轴向拉力、激励力幅值和激励频率为分岔控制参数的分岔图和最大李雅普诺夫指数图,以及反映不同运动行为区域的动力学响应图形,讨论分岔参数对系统呈现的倍周期和混沌运动的影响.结果表明,可通过相应参数的改变实现对系统复杂动力学行为的控制.     

气流排除倾斜管道积水的理论分析

运用作者推导的动量积分关系式,分析了向有积水的斜置管道中分别吹入轴向气流和螺旋气流时积水的运动情况。结果表明:在大多数情况下,螺旋气流能除去斜置管道中积水;而轴向气流不能除去积水,一段时间后会出现逆流。这一结果与Horii和赵耀华等人在这个问题上所做的实验结果一致。此外,还讨论了不同的初始条件对排水情况的影响。     

使用二元相位菲涅尔波带片产生轴向线聚焦

介绍了一种全新的轴向线聚焦方案.采用菲涅尔波带片，在实验中产生了沿轴向长为5mm，宽 100μm的线聚焦.光学测量表明，线聚焦轴向强度分布比较均匀.这些参数基本上可以满足激 光等离子体实验的要求. 关键词： 菲涅尔波带片 轴向线聚焦