Secure and noise-free holographic encryption with a quick-response code简

An optical fiber sensor for ultrathin layer sensing based o51 short-range surface plasmon polariton （SRSPP） is proposed, and the sensing characteristics are theoretically analyzed. Simulation results indicate that even for a detecting layer much thinner than the vacuum wavelength, a resolution as high as 3.7×10-6 RIU can be obtained. Moreover, an average ttfickness-detection sensitivity of 6.2 dB/nm is obtained, which enables the sensor to detect the thickness variation of the ultrathin layer up to tens of nanometers. The sensitive region of thickness could be adjusted by tuning the structure parameters.     

Novel method for simultaneous measurement of film thickness and mass fraction of urea–water solution

Quantitative knowledge of the film thickness and mass fraction of the urea-water solution is very crucial in many practical applications. Film thickness or mass fraction can only be determined individually by conventional measurement techniques. We develop a novel measurement method to measure the film thickness and mass fraction of ure~water solution simultaneously. The absorption coefficients of urea-water solution （5 50 wt%） are measured, a pair of optimized wavelengths is then chosen to achieve high measurement sensitivity. Cross validation is also performed and uncertainties of the technique are smaller than 0.68% for thickness measurements and 1.86% for mass fractions.     

Effect of alumina thickness on Al_2O_3/InP interface with post deposition annealing in oxygen ambient

In this paper, the effect of alumina thickness on Al2O3/InP interface with post deposition annealing （PDA） in the oxygen ambient is studied. Atomic layer deposited （ALD） Al2O3 films with four different thickness values （5 nm, 7 nm, 9 nm, 11 rim） are deposited on InP substrates. The capacitance-voltage （C-V） measurement shows a negative correlation between the alumina thickness and the frequency dispersion. The X-ray photoelectronspectroscopy （XPS） data present significant growth of indium-phosphorus oxide near the Al2O3/InP interface, which indicates serious oxidation of InP during the oxygen annealing. The hysteresis curve shows an optimum thickness of 7 nm after PDA in an oxygen ambient at 500 ℃ for 10 min. It is demonstrated that both sides of the interface are impacted by oxygen during post deposition annealing. It is suggested that the final state of the interface is of reduced positively charged defects on Al2O3 side and oxidized InP, which degrades the interface.     

Finite size specimens with cracks of icosahedral AI-Pd-Mn quasicrystals

Icosahedral quasicrystals are the most important and thermodynamically stable in all about 200 kinds of quasicrystals currently observed. Beyond the scope of classical elasticity, apart from a phonon displacement field, there is a phason displacement field in the elasticity of the quasicrystal, which induces an important effect on the mechanical properties of the material and makes an analytical solution difficult to obtain. In this paper, a finite element algorithm for the static elasticity of icosahedral quasicrystals is developed by transforming the elastic boundary value problem of the icosahedral quasicrystals into an equivalent variational problem. Analytical and numerical solutions for an icosahedral A1-Pd-Mn quasicrystal cuboid subjected to a uniaxial tension with different phonon-phason coupling parameters are given to verify the validity of the numerical approach. A comparison between the analytical and numerical solutions of the specimen demonstrates the accuracy and efficiency of the present algorithm. Finally, in order to reveal the fracture behavior of the icosahedral A1-Pd-Mn quasicrystal, a cracked specimen with a finite size of matter is investigated, both with and without phonon-phason coupling. Meanwhile, the geometry factors are calculated, including the stress intensity factor and the crack opening displacement for the finite-size specimen. Computational results reveal the importance of pbonon-phason coupling effect on the icosahedral A1-Pd-Mn quasicrystal. Furthermore, the finite element procedure can be used to solve more complicated boundary value problems.     

Improved Performance of Phthalocyanine Derivative Field-Effect Transistors by Inserting a Para-Quarterphenyl as the Inducing Layer

We investigate the phthalocyanine derivative organic field-effect transistors （OFETs） using a novel para - quaterphenyl （p-4p） as the inducing layer. Compared to the devices without the p-4p inducing layer, the performances of p-type （copper phthalocyanine） and n-type （fluorinated copper phthaloeyanine） OFETs with optimized thickness of p-4p thin films are greatly enhanced. Both the field-effect mobility and the on/off ratio of the two-type devices are improved by one order of magnitude compared to those of the control devices. This re- markable improvement is attributed to the introduction of p-4p, which can form a highly oriented and continuous phthalocyanine derivative film with the molecular π - π stack direction parallel to the substrate.     

不同厚度的Nd123片层的2-2复合籽晶对SmBCO样品生长的影响

采用MgO单晶与NdBa2Cu3O7-δ(Nd123)粉体的2-2复合体籽晶可以充分利用MgO与NdBCO籽晶的优势,对SmBCO晶体的生长起到了很好的诱导作用,成功制备出单畴SmBCO超导块材.本文采用不同厚度的Nd123片层和MgO单晶作为2-2复合体籽晶通过顶部籽晶熔渗生长工艺(TSIG)制备SmBCO超导块材,研究了Nd123片层的厚度对SmBCO样品生长的影响.结果表明,随着Nd123片层厚度的增加,样品的单畴形貌逐渐消失,并且出现了随机成核.通过对样品的生长特性和微观结构的研究,阐明了不同厚度的Nd123片层对SmBCO晶体生长形貌的影响机制.     

基于PTCDA的有机/无机光敏二极管结构优化

以p型硅和苝四甲酸二酐(perylene-3,4,9,10-tetracarboxylic acid dianhydride,PTCDA)为异质结,梳状金(Au)薄膜作为顶电极和光入射窗口制备了光敏二极管。研究表明,PTCDA的厚度和Au电极的厚度对光敏二极管的光响应度有很大的影响。对比不同PTCDA厚度的器件性能,在PTCDA厚度为100 nm时,光响应度最高达到0.3 A/W。进而采用最优化的100 nm厚的PTCDA薄膜制备硅基光敏二极管,对比不同Au电极厚度的器件性能。在Au厚度为20 nm时,器件的光响应度达到最优化的0.5 A/W。     

一种非接触测量光学零件厚度的方法

为了实现光学零件厚度的非接触测量,设计了一种基于电光扫描的非接触测量方法。采用电扫描技术控制光开关,形成半径依次减小的环状光束,经过锥透镜后在光轴上形成连续移动的光点,当光点瞄准待测光学零件表面时,反射能量出现峰值,即定位了待测零件的表面,进而获得光学零件的几何厚度。建立了测量平板零件厚度和透镜中心厚度的数学模型;从理论上探讨了该方法的测量范围和测量精度。结果表明:设定锥面镜口径为100mm,材料折射率为1.52,当锥面镜的锥角从1°变化到40°时,测量动态范围可以从5507mm变化到26mm;当测量范围为26mm时,测量精度可以达到2.5μm。该方法可基本满足目前光学零件中心厚度的测量需求。     

深圳城市气溶胶物理光学特性的观测研究

气溶胶是影响气候变化和空气污染的重要因子.在深圳地区展开气溶胶观测实验,可以获得可靠的光学物理特征,进而有助于准确评估气溶胶在新型超极城市区域的气像和环境效应.本文利用2010年12月至2011年8月太阳光度计、黑碳和浊度计等气溶胶观测资料,分析了新型超级城市深圳地区的气溶胶物理光学特性.深圳地区气溶胶呈明显季节变化,冬、春季由于城市污染性气溶胶的影响,气溶胶光学厚度和Angstrom波长指数都较大,夏季受海盐气溶胶的影响,光学厚度较小,Angstrom波长指数也较小.光学厚度与Angstrom 波长指数对比表明城市综合性污染是引起深圳气溶胶高光学厚度的主要原因.深圳地区气溶胶的散射系数、吸收系数的平均值(标准偏差)分别为178.7×10^-6 m^-1(126.6×10^-6 m^-1)和32.5×10^-6 m^-1(18.1×10^-6 m^-1),均低于珠三角腹地多年观测平均值的二分之一和国内其他大型城市观测值.而单次散射反照率为0.81,与珠三角其他地区得到的结果接近.此外,气溶胶吸收、散射和单次散射反照率呈明显日变化,可能主要受大气边界层变化的影响.