精密垫片精冲工艺有限元分析与模具设计

精密垫片零件，如图1所示，零件材料为1Cr18Ni9Ti，强度大（σb=650MPa），有一定塑性。从零件尺寸精度看，φ4mm外圆为IT7级精度，φ4mm外圆与φ2mm内孔有很高的同轴度要求，冲裁断面与零件两端面有垂直度要求，普通冲压不能达到零件精度：从工序的角度看，有冲孔和落料工序，剪切面粗糙度Ra≤3．2μm，属于光洁冲裁范畴；另外，技术条件中要求零件两大面不得有任何划伤，且光滑平整。总体上看，该零件的冲压加工性不好，难度较大，对模具的设计、选材、制造要求都较高。     

线阵CCD在双棱镜测光波波长中的应用

CCD是一种以电荷量表示光量的大小,用耦合方式传输电荷量的新型光电传感器件,其基本部分由MOS光敏元列阵和读出移位寄存器组成.具有体积小、重量轻、功耗低、光谱响应范围宽、分辨率高、精度高、稳定性能良好等一系列优点,与计算机配合使用,使得由CCD采集到的大量数据的处理变得非常容易.对测量数据的处理可以经过存储、自动补偿和校正,最后打印输出,现今已在航天、遥感、军事设备、自动控制、雷达、医学、生物、化学、颜色测量等方面得到了广泛的应用[1].我们将其用在实验教学中,取得了很好的效果.     

Energy Density in Quark-Gluon Plasma

We study the energy density in quark-gluon plasma. At the very high temperature, the quark matter is a hot and dense matter in the colour deconfinement condition, and quarks can coalescent diquarks. Energy density of this system is worked out and compared with the energy density in the other two kinds of situations. Possible energy density is about ε0≈2.4 GeV/fm^3 according to our estimation for quark matter including diquarks.     

同系列电子给体与同系列电受体电荷转移络合作用的研究

用电子吸收光谱法, 研究了五个电子受体系列和三个电子给体系列以及非同系列的给、受体共48个化合物间的弱电荷转移络合作用。发现所研究的同系列给体与同一受体作用; 或同系列受体与同一给体作用; 或同系列给体与同系列受体作用, 一般存在着明显的CT络合与表观不络合的现象。通常情况下, 同系序数大的化合物呈现表观不络合;有时, 同系序数大和小的化合物, 即同系物的两头均呈现表观不络合现象, 对此种现象用给、受体间前线分子轨道能级关系进行了讨论。     

200AGeVpp、pS和SS碰撞中单奇异粒子产生数据的分析

用相对论性核-核碰撞的蒙特卡罗事件产生器──LUCIAE,分析了200AGeVpp､pS和SS碰撞中单奇异粒子产生的实验数据.结果表明:SS中心碰撞相对于pp或pS最小偏畸事件,似乎有更强的末态相互作用,更短的奇异粒子产生时间,和更大的奇异粒子对压低因子. 从pp到pS再到SS奇异增强的实验事实,似乎不必引入夸克-胶子等离子体就能得到解释.     

胶球研究现状

本文介绍了有关胶球研究的现状,重点介绍确认胶球的一些定性的判据以及实验上已发现的一些可能的胶球候选者.     

A Comparison of Different Measures for Dynamical Event Mean Transverse Momentum Fluctuation

Various measures for the dynamical event mean transverse momentum fluctuation are compared with the real dynamical fluctuation using a Monte Carlo model. The variance calculated from the G-moments can reproduce the dynamical variance well, while those obtained by subtraction procedures are approximate measures for not very low multiplicity. Фpt, proposed by Gadzicki M and Mrowczynski S [Z. Phys. C 54 (1992)127], can also serve as an approximate measure after being divided by the square root of mean multiplicity.     

矿渣粉加固粉土的理论分析及路用性能研究

提出了矿渣粉加固粉土的相关理论。将矿渣粉在加固土中的作用归结为火山灰胶凝效应和微集料填充效应,而火山灰胶凝效应又可进一步归结为水化作用、激发作用和离子交换作用;认为微集料填充效应与矿渣粉细度极为相关;用框图归纳了矿渣粉加固土的两种作用效应。进行了矿渣粉、石灰粉加固土无侧限饱水抗压强度、水稳定性、冻稳定性、温度收缩和干燥收缩等路用性能试验,并进行比较。结果表明,矿渣粉加固土所测路用性能指标优于石灰粉加固土。为工程应用提供了试验依据。     

Decomposition of the Two Lowest Lamb modes in a Bonded Plate

Based on the expression of the dispersion equation of Lame waves in an adhesive two-layered plate pressented in our proevious paper [Chin,Phys,Lett,18(2001)1483],the two lowest Lamb modes,the symmetric mode S0 and the antisymmetric mode A0 are successfully decomposed in the low-frequency regime,Relations between the rigidity of the bond and the velocity of the two Lamb modes are found,which lay a foundation for the estimation of the bond rigidity of the adhesive plate.The influence of the variations of the bond rigidity in terms of the stiffness constants KN and KT of the spring model on the velocity of the two Lamb modes in discussed and numerically evaluated.numerical results indicate that the deterioration of the bond rigidity causes the phase velocity decrease for Lamb modes of the two lowest order,thus having a possibility for the evaluation of the bonding state of the adhesive plate by using ultrasonic wave velocity measurement.