金属上化学吸附的族模型量子化学研究

簇模型方法是研究化学吸附的最重要的量子化学方法之一。本文对＇簇－－表面类比法＇的物理内涵、研究现状、以及发展趋势作了简要的评述。     

锂离子电池负极碳材料的表面改性与修饰：Ⅲ,人工施加的固体电解质膜…

研究了人工施加的无机固体电解质体膜对锂碳负极电池性能的影响作用，结果表明碳电极的容量及首次充放电效率相对于未改性电极都得到了一定程度的提高。显示了以这层外界人工施加的晶体膜替代的电极体系本身所形成的钝化膜之有效性，扫描电子显微镜的研究直观地显示了这层人工施加膜的均匀，致密性质。     

分析型反射电子显微镜和表面科学：实验技术和发展

本文综述了反射电子显微术(REM)和反射电子能量损失谱(REELS)在表面科学中的应用。较详细地给出了用这些方法研究表面原子结构、化学成份和电子态的基本实验和理论,指出了发展这一学科对表面研究的重要性。     

Fabrication and Characterization of Ni Thin Films Using Direct-Current Magnetron Sputtering

Ni films are deposited by using ultra high vacuum dc magnetron sputtering onto silicon substrates at room temperature, and the high-quality and high-density films are prepared. The parameters, such as thickness, density and surface roughness, are obtained by using small-angle x-ray diffraction (XRD) analyses with the Marquardt gradient-expansion algorithm. The deposition rate is calculated and the Ni single layer can be fabricated precisely. Based on the fitting results, we can find that the surface roughness of the Ni films is about 0.7nm, the densities of Ni films are around 97% and the deposition rate is 0.26nm/s. The roughness of the surface is also characterized by using an atomic force microscope (AFM). The changing trend of the surface roughness in the simulation of XRD is in good agreement with the AFM measurement.     

聚合物复合膜的制备及吸液性能

由聚丙烯（PP）、聚乙烯（PE）制成的单层或多层微孔膜（PP，PP／PE／PP）具有良好的机械强度，且具备自关闭功能，已被广泛用作液态锂离子电池的隔膜，但PP，PP／PE／PP等微孔膜表面能低，难与塑料电极真正复合为一体，不能直接用于聚合物锂离子电池。因此在PP，PP／PE／PP等微孔膜表面涂敷一层具有黏结性质的过渡薄膜，兼顾两种材料的优点，有助于提高机械强度和将电极粘结起来的黏结力。聚合物复合膜是一种具有3层结构的复合膜，由两外层膜及中间膜组成。正丁醇不溶胀PVDF—HFP，可以丁醇为介质来测量复合膜的吸液率，该数据可作为膜孔率高低的判据，也可用于粗略判断膜电导率高低。     

工艺参数对铀表面铝镀层热应力分布影响

为了防止铀的腐蚀，采用在铀表面磁控溅射镀铝，但使用中发现铝镀层内产生了较大的应力，影响镀层结合强度及使用性能。通常认为，薄膜内的应力有热应力和生长应力两种。文中通过改变沉积温度、镀层厚度以及镀层力学性能分数，研究它们对镀层热应力分布的影响，从而为改善铀表面铝镀层内热应力分布提供理论依据。     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.