LiAlH4 和 NaBH4 对α,β-不饱和醛酮中碳碳双键的还原

论述了ＬｉＡｌＨ４和ＮａＢＨ４对αβ不饱和醛酮的１２还原及１４共轭还原；探讨了既还原羰基又还原碳碳双键的机理；概括了只还原羰基而保留碳碳双键的选择性还原方法。     

酸性溶液化学镀Ni-P-B合金及结构性能表征(英文)

联用次亚磷酸钠和硼氢化钠两种还原剂 ,从酸性镀液中沉积出不同硼含量的Ni_P_B镀层 ,并用原子力显微镜、X_射线衍射、透射电镜、动电位扫描等实验技术对其镀态结构及性能进行了表征。实验表明 ,镀液中硼氢化钠含量对沉积速度影响不大 ,但能显著影响镀层的化学组成。硼的共沉积使镍晶格点阵产生扭变 ,导致镀层晶粒增大 ,表面粗糙 ,颗粒分布不均匀 ,并使镀层由非晶态向微晶结构转变 ,且微晶成分随镀层中硼含量的增加而增多。Ni_P_B镀层的硬度随镀层中硼含量的增加而增大 ,热处理能显著提高镀层的硬度 ,且服从沉淀硬化机理。在 3.5wt%NaCl和 40wt%NaOH两种介质中 ,Ni_P_B合金的耐腐蚀能力优于Ni_P合金。镀层中硼含量越高 ,其耐腐蚀能力越强。     

Synthesis,X—Ray Structure and Characterization of a Triruthenium Cluster Complex Ru^Ⅲ3（μ3—O）（μ—CH3COO）6（py）2Cl with Four Steps One—electron Redox Processes

The synthesis and crystal structure of oxo-centered carboxylate-bridge trinuclear ruthenium complex,Ru3O(CH3OO)6(py)2Cl(py=pyridine)(1),are reported herein.The complex 1 has been characterized by IR,cyclic voltammetry (CV),UV-Vis and X-ray crystal analysis.The complex 1 in 0.1 mol/L (n-C4H9)4HPF6-CH2Cl2 solution at room temperature shows four oneelectron redox processes at E1/2=-1.38,1.20,-0.17 and 1.07V vs. Ag/AgCl.     

bio(oh)-nabh4还原法制备氧化偶氮苯类化合物

以NaOH溶液快速沉淀BiCI3溶液制备了BiO(OH),研究了BiO(OH)对NaBH4还原芳香族硝基化合物的催化性能,考察了NaBH4用量对反应的影响.结果表明,在温和条件下BiO(OH)具有很高的催化活性和选择性.NaBH4和芳香族硝基化合物的摩尔比为1.04:1,在甲醇中室温反应2 h,芳香族硝基化合物主要被还原为氧化偶氮苯类化合物,收率80.4%～96.9%.该催化剂重复使用5次后活性没有明显下降.于120℃再生后,其活性与新制备催化剂相当.     

纳米尺度NiLa2O4尖晶石催化NaBH4还原亚胺制仲胺

由溶胶-凝胶法制得的Ni-La化合物经热分解制备了纳米尺度NiLa2O4尖晶石,在750 oC焙烧后形成了结晶良好的尖晶石结构.采用差热分析、X射线衍射、透射电镜、扫描电镜和粒度分布分析等手段表征了该尖晶石的物理化学性质.结果表明,该纳米颗粒有规则的外形和确定的晶面,由平均粒径为40 nm的规整半球晶粒组成.精修的晶胞参数a=3.861205?和c=12.6793?.在NaBH4选择还原亚胺制相应仲胺的反应中,该新型纳米NiLa2O4尖晶石可用作高效多相催化剂,得到了较高的产物产率.所有反应可在室温和相对较短的时间内完成.在优化的反应条件下,均可得到带有不同芳基的,包括带有吸电子和供电子基团的仲胺.该催化剂回收简便,重复使用4次,其催化活性未见明显下降.     

化学还原新体系制备负载Ni-B非晶态催化剂及其催化加氢性能

化学还原新体系制备负载Ni-B非晶态催化剂及其催化加氢性能;共还原剂;非晶态合金;催化加氢     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

硼氢化钠水解制氢的研究

采用置换镀的方法在泡沫镍基体上获得不同载钌量的NaBH4水解制氢催化剂。实验结果表明，NaBH4水解制氢反应为零级反应，氢气生成速率随载钌量的增加而变快；当泡沫镍表面完全被钌覆盖时，载钌量为6%，相应的催化能力最强。与离子交换树脂载钌催化剂相比，泡沫镍载钌催化剂更稳定、耐用。实验还证实，30%比35%的NaBH4水溶液在相同的催化剂作用下更易发生水解反应；NaBH4水溶液中加入少量的NaOH有助于提高钌催化剂的催化性能。通过对NaBH4储氢体系的能量计算，说明采用该氢源体系的微型燃料电池的能量密度有望达到甚至超过锂离子电池的比能量水平。