无气味代硫醇试剂的合成与应用研究进展

综述了无气味硫醇和硫化试剂的合成及其作为代硫醇试剂在有机合成中应用的研究进展.     

热塑性弹性体/蒙脱土纳米复合材料的制备及性能

热塑性弹性体;蒙脱土;纳米复合材料;动态硫化     

FeS2和CoS2在长寿命热电池中的性能比较

长寿命热电池研制的关键技术之一是阴极材料的确定，在长寿命热电池的研制中，选择并制备了两种阴极材料二硫化铁和二硫化钴。从单体电池实验和电池组实验方面分别对两种阴极材料的电化学性能进行比较。     

不同热处理方式对超细粒子K—Co—Mo催化剂性能和结构的影响

以柠檬酸为络合剂,采用溶胶-凝胶法制备Co-Mo超细粒子氧化物,所得干凝胶分别置于空气和氩气中进行焙烧,然后经K2CO3助化后硫化。使用X射线衍射（XRD）比表面测试和扩展X光吸收精细结构（EXAFS）对样品进行结构表征,同时测试硫化态样品的CO加氢合成低碳混合醇活性。XRD结果表明,在空气中焙烧的样品为单一的CoMoO4物种,其晶粒尺寸约为60nm。在氩气中焙烧的样品,柠檬酸的分解对样品起到还原作用,主要物种为CoMoO3,同时存在少量的CoMoO4,晶粒尺寸约为20nm。BET结果表明,在氩气中焙烧的样品具有较大的比表面积。硫化态样品中主要物种为MoS2和Co9S8,此外,还可能存在CoMoS3.13物种。XRD和EXAFS结果均表明,在氩气中焙烧的样品硫化后,其晶粒尺寸相对较小。活性测试结果表明,催化剂晶粒尺寸的降低明显促进了合成醇的活性和选择性的提高。     

Radiation Vulcanization of Magnetorheological Elastomers Based on Silicone Rubber

介绍了两种制备磁流变弹性体的硫化方法即高温硫化和辐射硫化. 研究中采用动态力学分析仪(DMA)测量了样品的动态力学特性.特别是对样品的磁流变效应和耐久性进行了详细的测试. 实验结果表明,经过辐射硫化的样品具有更大的零场模量和磁致模量,以及更好的磁流变效应和耐久性. 为了解释这些结果,文章对样品的体积形变和增塑剂渗出都作了详细的分析. 在硫化过程中样品的体积保持稳定是辐射硫化样品具有大磁致模量的重要原因,而增塑剂渗透性小也是辐射硫化样品具有高磁流变效应和耐久性的重要因素.     

NH4Cl作助熔剂合成CaS：Ce的光谱特性及其浓度效应

以ＮＨ４Ｃｌ作助溶剂，碳还原硫酸钙的方法合成了ＣａＳ：Ｃｅ。在紫外光激发下，ＣａＳ：Ｃｅ中存在着Ｃｅ＾３＋的＾２Ｄ－＾２Ｆ５／２（５００ｎｍ）和＾２Ｄ－＾２Ｆ７／２（５５０ｎｍ）跃迁发射，但在蓝色光激发下，只有波峰为５３２ｎｍ半宽度为９２ｎｍ的宽带发射。当Ｃｅ＾３＋的浓度为０．０７５ｍｏｌ％时，＾２Ｄ－＾２Ｆ５／２跃迁发射强度与＾２Ｄ－＾２Ｆ７／２跃迁发射强度相等，而５３２ｎｍ发射猝灭。     

Strongly Correlated Effect in TiS2

The thermoelectric compound TiS2 is studied by using the full-potential linearized augmented plane-wave method on the density functional theory with the generalized gradient approximation （GGA） as well as the on-site Coulomb interaction correction （＋U）. The Seebeck coefficient of TiS2 is calculated based on the electronic structure obtained within the GGA under the consideration of the on-site Coulomb interaction. The calculated Seebeck coefficient at 300K shows that Coulomb interaction U in the range of 4.97-5.42eV is important to reproduce the experimental data. The obtained energy gap Eg around 0.05 eV indicates that TiS2 is an indirect narrow-gap semiconductor.     

橡胶硫化促进剂DZ合成工艺探讨

采用两步合成法制备橡胶硫化促进剂ＤＺ（Ｎ，Ｎ－二环己胺－２－苯并噻唑次磺酰胺），控制Ｍ钠盐与氯代二环乙胺的摩尔比为１，选择乙醇作有机溶剂，将缩合反应滴加Ｍ钠盐的温度控制在３０－３５℃，即可制得熔点在９０℃以上，溶程小于１℃，且收率近８０％的高品质ＤＺ产品。     

Radiation Vulcanization of Magnetorheological Elastomers Based on Silicone Rubber

The fabrication of magnetorheological （MR） elastomers was studied by two vulcanization methods, including heat vulcanization （HV） and radiation vulcanization （RV）, were employed to fabricate MRE samples. The dynamical mechanical properties were characterized by using a dynamic mechanic analyzer. In particular, both the MR effect and its durability were investigated. The experimental results showed that RV samples have large magnetoinduced modulus, large zero-field modulus, and good durability property of MR effect. To explain these results, cubic deformation and plasticizer migration were analyzed. Large magneto-induced modulus of RV sample results from cubic deformation during vulcanization process. And the plasticizer migration results in better durability of MR effect.