藉时间分辨荧光技术研究氢苊、荧蒽与环糊精的络合过程

用时间分辨荧光技术研究二氢苊、荧蒽与β-环糊精的络合过程以及乙醇分子对络合过程的影响, 观察到它们在环糊精水溶液中有长寿命组份存在. 证明这些分子与环糊精分子发生了络合作用, 并根据荧光衰减曲线的指前因子计算出了它们的络合平衡常数.     

烟碱分子烙印聚合物的吸附特性

利用分子烙印技术，以烟碱为烙印分子，甲基丙烯酸(MAA)为功能单体，乙二醇二甲基丙烯酸酯(EDMA)为交联剂，合成了对烟碱具有特异性作用的分子烙印聚合物P(Nic)；通过平衡吸附实验，评价了其对烟碱的亲和力和选择性。与非烙印聚合物相比，P(Nic)对烟碱表现了很高的亲和力；Scatchard分析表明在P(Nic)中存在对烟碱有不同的亲和力的两类作用位点。通过与氨基吡啶类物质在P(Nic)上的吸附行为比较，表明P(Nic)对烟碱具有很好的选择性。本工作证明了用P(Nic)作为固相萃取(SPE)材料选择性地从烟草烟雾中提取烟碱的可能性。     

小功率空气冷却ICP-AES 研究I——小功率空气冷却ICP的特性

本文用顺序等离子体光谱仪研究了27.12MHz他激式R.F.发生器点燃的小功率空气冷却ICP的特性。测量并比较了二十个元素五十七条谱线在空气冷却和氩冷却两种ICP中的检测限。     

CuO超细粉体的形貌与红外特性研究

CuO作为一种多功能精细无机材料，在印染、陶瓷、玻璃及医药等领域的应用已有数十年的历史，作为催化剂的主要活性成分，近年来在氧化、加氢、C１化学合成、NOx还原、CO及碳氢化合物燃烧、精细化工等多种催化反应中也得到了广泛的应用。可以推测，当CuO材料的粒度达到纳米级时，将使它的功能更加独特，应用更为广泛。因此CuO纳米材料的制备方法、聚集状态、与其他组分或载体的作用状况及催化活性等成为当前功能材料发展的研究热点之一犤１～８犦。我们在前文中报道了直接热解Cu２（OH）２CO３所得CuO粒径小、分布均匀、比表面积大，…     

硝基化合物的吸附伏安法研究 I: 5-硝基-1, 10-邻菲咯啉的吸附伏安特性

本文用线性扫描技术对氨性溶液中, 低浓度, 5-硝基-1,10-邻菲咯啉的吸附伏安特性进行了研究.     

Molecular Simulation on Transport Properties of Confined Water

The diffusivity and viscosity of water confined in micropores were studied by molecular dynamics simulations. The effects of pore width and density were analyzed at pore widths from 0.9 to 2.6nm. The diffusivity in micropores is lower than that of the bulk, and it decreases as pore width decreases and as density increases. But the viscosity in micropores is much larger than that of the bulk, and it increases as pore width decreases and as density increases. The diffusivity in channel parallel direction is obviously larger than that in channel perpendicular directions.     

紫外预电离TEA CO2激光器放电特性的实验研究

 横向激励大气压（transversely excited atmospheric,TEA）CO₂激光器的放电稳定性是决定该类型激光器应用效果的关键因素。通过对采用电感充放电电路的紫外预电离激光器的实验研究，得到了激光器放电动态过程的规律，并发现残余振荡是主放电后发生弧光放电的主要原因。实验中采用不同配比的气体，并对电感充放电电路与改进后的硅堆充放电电路进行了比较。实验结果表明：增加充电电感值可以降低主放电结束后储能电容上的残余电压；而采用硅堆放电电路在主放电后仅有相对幅值很低的稳定残压，两种方案都大幅度抑制了弧光放电的形成，有效地提高了激光单脉冲能量。     

Synthesis and Characterization of Titanium-doped Ordered Mesoporous Alumina

Titanium-doped ordered mesoporous alumina with specific structural properties has been prepared by the evaporation induced self-assembly sol-gel method. The results show that the doped titanium helps to stabilize the ordered mesoporous alumina material without influencing the ordered mesoporosity. The textural properties of the obtained sample are related to the amount of doped titanium. When the molar ratio of aluminum to titanium(n(Al)/n(Ti)) is controlled as 10.2, the titanium-doped ordered mesoporous alumina exhibits high surface area(up to 218 m2 g-1), large pore volume(0.42 cm3 g-1) and narrow pore diameter(6.1 nm) after treating at 900 ℃, showing high thermal stability. Moreover, the obtained sample calcined at 900 ℃ still maintains ordered mesoporous structure and exhibits high thermal stability.     

New tetraphenylpyridinium-baseci luminogens with aggregation-induced emission characteristics

The research on aggregation-induced emission （AIE） has drawn increasing interests in the past decade. With the efforts scientists paid, a variety of AIE systems have been developed, among which the tetraphenylethelene and silole derivatives are the most studied. Development of new AIE systems could further enrich the AIE molecules and promote the development of AIE area. In this communication, we prepared a new AIE system based on 1,2,4,6-tetraphenylpyridinium ions according to the restriction of intramolecular rotation mechanism. These molecules could be facilely synthesized via one-step and one-pot reaction. The ionic AIE-active molecules could find wide application in sensing and optoelectronic areas.