球形金属表面球磨制备石墨烯薄膜摩擦特性研究

采用球磨的方法实现了在钢球表面制备大面积连续的石墨烯薄膜,考察其随球磨时间变化,石墨烯薄膜在钢球表面的包裹程度、形貌变化、结构演变过程、结合性能及摩擦学性能. 研究表明:随着球磨时间的增加,石墨烯在钢球表面团聚减少,包裹更加均一,结构趋于有序;当球磨时间达到50 h时,在钢球表面形成分布均匀且大面积连续的石墨烯薄膜,使与含氢类金刚石碳薄膜组成配伍的平均摩擦系数从裸钢球的0.043降至0.022,磨痕深度和宽度都显著降低. 经胶带粘取100次或乙醇中超声清洗30 min后球磨制备石墨烯薄膜仍然粘附于钢球表面,在氩气环境下石墨烯薄膜表现出优于钢球的摩擦磨损性能.      

基于球壳内壁反射的球形换能器自易校准方法

基于球形换能器发射的脉冲球面声波及其在同心球壳内壁的反射,应用机电互易定理,导出了在球面波发射回波声场中,用于校准球形换能器的互易常数。以此为基础,提出一种使用封闭球壳反射器的自易校准方法,通过一次测量即可得到球形换能器的5个基本电声参数。进一步,将自易法校准所得的电压灵敏度换算成平面波声场中定义的标准灵敏度,给出了换算系数。为确定该换算系数,发展了对换能器散射系数进行测量的方法。在25~63 kHz频率范围内,对半径10 mm的球形换能器实施了自易校准。结果表明,测得的电压灵敏度的标准不确定度估计优于0.9 dB。     

纳米银刻蚀比色法检测褪黑激素

该文构建了一种基于氯金酸刻蚀球形纳米银检测褪黑激素的简单、高灵敏比色探针.纳米银可被氯金酸氧化刻蚀为Ag+,同时还原生成的纳米金沉积在刻蚀后的纳米银表面,导致其溶液的吸光度降低和颜色增强(由黄色变为橘黄色).当向体系中加入褪黑激素时,氯金酸被还原,抑制了纳米银的刻蚀,从而使得溶液吸光度增加和颜色变浅.结果显示,在0.1...     

液晶功能化氮化硼/液晶环氧树脂导热复合材料的制备

导热高分子复合材料的导热系数（λ）难以达到预期值的重要原因之一在于高分子基体的本征λ低;同时导热填料-高分子基体的界面热障也是导致其导热性能提升不佳的重要因素。通过在球形氮化硼（GBN-100）表面原位接枝液晶环氧小分子（LCE-g-（GBN-100）,gGBN-100）,再与自制的主链型液晶环氧树脂（M-LCER）基体熔融共混复合-浇注成型制备gGBN-100/M-LCER导热复合材料。结果表明,GBN-100表面LCE的引入赋予了gGBN-100液晶特性,同时有效降低了gGBN-100和M-LCER基体的界面热障。当gGBN-100的质量分数为30%时,gGBN-100/M-LCER导热复合材料的λ为1.12 W/mK,为纯M-LCER基体λ（0.51 W/mK）的2.2倍,也高于相同用量（质量分数30%）下GBN-100/M-LCER导热复合材料的λ（1.02 W/mK）。此时gGBN-100/M-LCER导热复合材料的弹性模量和硬度也从纯M-LCER基体的2.78和0.19 GPa分别提高到4.13和0.24 GPa。     

Lifetime of resonant state in a spherical quantum dot

This paper calculates the lifetime of resonant state and transmission probability of a single electron tunnelling in a spherical quantum dot (SQD) structure by using the transfer matrix technique. In the SQD, the electron is confined both transversally and longitudinally, the motion in the transverse and longitudinal directions is separated by using the adiabatic approximation theory. Meanwhile, the energy levels of the former are considered as the effective confining potential. The numerical calculations are carried out for the SQD consisting of GaAs/InAs material. The obtained results show that the bigger radius of the quantum dot not only leads significantly to the shifts of resonant peaks toward the low-energy region, but also causes the lengthening of the lifetime of resonant state. The lifetime of resonant state can be calculated from the uncertainty principle between the energy half width and lifetime.     

Geometry optimization in planetary rotation stage for thickness uniformity of films on spherical substrates

We report the simulation results on the thickness uniformity of optical coatings deposited on spherical substrates by optimizing the geometric configuration parameters, such as tilting angle of the substrate holder and position of the evaporation source in a 1 000-mm-diameter planetary rotation stage （PRS）. We reveal that good film uniformity on convex spherical surfaces or flat substrates, as well as concave surfaces with weak to moderate curvatures can be obtained through appropriate tilting of the substrate holder. For 300-mm-diameter substrates with clear aperture to radius of curvature （CA/RoC） between 0.3 and 0.7, the achievable film uniformity is above 99%. The source position is optimized to achieve good film uniformity.     

射频感应等离子体制备球形氧化铝的工艺研究

采用射频(RF)感应等离子体对颗粒形状不规则的氧化铝粉作球化处理,当氧化铝以极短暂时间快速穿越射频等离子体炬时,颗粒因受热而熔化成液滴,快速冷却,形成球形固态颗粒。应用单因素法讨论射频等离子体制备球形氧化铝的工艺参数,研究了制备过程中相关的中气流量、抽风负压、送粉速度和分散方式等主要工艺参数对球形氧化铝粉的影响。用电子扫描显微镜(SEM)观测评估球化效果,测定松装密度和振实密度。     

Free Field Reciprocity Calibration in a Convergent Spherical Acoustic Wave of a Focusing Transducer

Based on the reciprocity theorem of the acoustic field,we derive the formula of the reciprocity coefficient of a convergent spherical acoustic wave and we calculate a series of diffraction corrective factor curves of the reciprocity coefficient of transducers.Using these formulae and corrective factors,we calibrate the free field transmitting current response and the free field voltage sensitivity of a focusing transducer using the self-reciprocity method.The experimental results of the reciprocity calibration of the focusing transducer in the frequency range of 2MHz to 5.4MHz are presented.     

制备均一性靶丸过程中的影响因素

在激光聚变实验中,高球形度、高厚度均一性的靶丸经常通过乳液微封装方法来制备。利用T.Norimatsu的模型研究在靶丸制备过程中,界面间表面张力、油相粘度、壳层尺寸、壳层厚度的影响。结果显示:较大的表面张力,较小的壳层尺寸,会使胶囊具有更好的均一性。当外部变形形式不同的时候,油相的粘度对于壳层均一性会有不同作用。