溶剂诱导翻转Pickering乳液用于原位循环使用酶催化剂

Separation and recycling of catalysts are crucial for realizing the objectives of sustainable and green chemistry but remain a great challenge, especially for enzyme biocatalysts. In this work, we report a new solvent-induced reversible inversion of Pickering emulsions stabilized by Janus mesosilica nanosheets (JMSNs), which is then utilized as a strategy for the in situ separation and recycling of enzymes. The interfacial active solid particle JMSNs is carefully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption experiments, Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA).The JMSNs are demonstrated to show order-oriented mesochannels with a large specific surface area, and the hydrophobic octylgroup is selectively modified on one side of the nanosheets. Furthermore, the inversion is found to be a fast process that is strongly dependent on the interfacial activity of the solid emulsifier JMSNs. Such a phase inversion is also a general process that can be realized in various oil/water phasic systems, including ethyl acetate-water, octane-water, and cyclohexane-water systems. By carefully analyzing the capacity of JMSNs with different surface wettabilities for phase inversion, a triphase contact angle (θ) close to 90° and a critical oil-water ratio of 1 : 2 are identified as the key factors to achieve solvent-induced phase inversion via a catastrophic phase inversion mechanism. Importantly, this reversible phase inversion is suitable for the separation and recycling of enzyme biocatalysts that are sensitive to changes in the reaction medium. Specifically, during the reaction, the organic substrates are dissolved in the oil droplets and the water-soluble catalysts are dispersed in the water phase, while a majority of the product is released into the upper oil phase and the enzyme catalyst is confined inside the water droplets in the bottom layer after phase inversion. The perpendicular mesochannels of JMSNs provide a highly accessible reaction interface, and their excellent interfacial activity allows for more than 10 rounds of consecutive phase inversions by simply adjusting the ratio of oil to water in the system. Using the enzymatic hydrolysis kinetic resolution of racemic acetate as an example, our Pickering emulsion system shows not only a 3-fold enhanced activity but also excellent recyclability. Because no sensitive chemical reagents are used in this phase inversion process, the intrinsic activities of the catalysts can be preserved even after seven cycles. The current study provides an alternative strategy for the separation and recycling of enzymes, in addition to revealing a new innovative application for Janus-type nanoparticles.     

磁性交联壳聚糖微球对Cu2+的吸附性能研究

以Fe_3O_4为磁核,环氧氯丙烷为交联剂,制备磁性交联壳聚糖微球(MCB)。采用FTIR、XRD及SEM对MCB进行表征分析,结果表明壳聚糖发生了交联反应,且Fe_3O_4被壳聚糖包埋。通过正交试验L_9(3~4),得到MCB的最优制备工艺条件为:环氧氯丙烷用量为3.0 mL,反应温度为45℃,反应时间为3.0 h,MCB对Cu~(2+)的吸附率可达63.70%。同时在单组分体系中研究了MCB对Cu~(2+)的吸附行为,结果表明:MCB对Cu~(2+)的最佳吸附pH值为5.0,MCB对Cu~(2+)的吸附遵循Langmuir等温吸附模型;动力学研究表明,MCB对Cu~(2+)的吸附过程符合拟二级吸附动力学方程。     

三维大孔TiO2光催化剂的制备及其催化性能

 以聚甲基丙烯酸甲酯微球为模板,以钛酸正丁酯为原料,采用溶胶-凝胶法制备了具有三维结构的大孔TiO2. 采用差示扫描量热、热重-微分热重、X射线衍射、红外光谱、扫描电子显微镜和氮气吸附等手段对样品进行了表征. 结果表明,高温热处理后得到的三维大孔TiO2光催化剂的孔径为200 nm左右,孔径分布均匀, TiO2纳米晶粒中锐钛矿相和金红石相的含量分别为82%和18%. 光催化氧化实验表明,此种三维结构的TiO2对甲基橙溶液具有较好的光催化氧化性能.     

胶体晶体

简要综述胶体晶体的研究进展情况,主要介绍胶体粒子的简单自组装、模板引导下的自组装和二元胶体晶体组装等几类主要的胶体晶体制备技术,并概述胶体晶体在光子晶体、传感器、光子纸张、三维有序大孔材料、二维纳米结构阵列等方面的应用。     

PVA-g-PS复合微球的制备与粒径控制研究

由链转移自由基聚合与端基置换反应法,合成了苯乙稀基单封端的聚醋酸乙烯酯(PVAc)大分子单体,使其与苯乙烯在乙醇/水的混合介质中进行自由基分散共聚,得到了表面以PVAc为接枝链的聚苯乙烯(PVAc-g-PSt)微球。将所得微球在碱性条件下醇解,形成了以亲水性聚乙烯醇(PVA)为壳、聚苯乙烯为核的复合微球(PVAc-g-PSt)。用核磁共振对聚合物的结构进行表征,定出了PVAc末端双键的含量;并用激光光散射、扫描电子显微镜对微球的粒径与形态进行了表征。研究结果表明,在共聚反应体系中大分子单体的分子量与浓度、苯乙烯浓度、引发剂浓度及溶剂的组成对微球的形态和粒径大小有明显影响。     

利用Triton X-100合成介孔二氧化硅及其形貌研究

以非离子型表面活性剂Triton X-100为模板剂,正硅酸乙酯为硅源,合成了介孔二氧化硅分子筛.利用XRD、N2吸附—脱附、SEM、以及TG-DTA对样品进行了表征,结果表明合成的材料具有有序介孔结构、高比表面积及高孔容。同时比较了不同条件下所得产物的形貌结构,并分析了它们的形成机理。     

多金属氧酸盐/介孔分子筛杂化材料的制备与表征

采用嵌段共聚物模板P123和缺位Keggin结构的多金属氧酸盐K₈SiW₁₁O₃₉•12H₂O, 由溶胶-凝胶法合成了具有类六方结构的SiW₁₁/SBA-15杂化介孔分子筛材料, 并通过X射线衍射(XRD)、傅立叶变换红外光谱(FT-IR)、紫外漫反射光谱(UV/DRS)、电感耦合等离子原子发射光谱(ICP-AES)、低温N₂吸附、透射电子显微镜(TEM)等手段对其进行了表征. 结果表明, 杂化材料中不仅规整均一的类六方介孔结构得以保持, 而且多金属氧酸盐的Keggin单元保留完整(含量达25%左右), 并共价键联于介孔材料的孔道内部. 稳定性实验表明, 杂化材料中多金属氧酸盐在水中的流失率远低于一般浸渍法制备的样品.     

多孔整体固定相的制备与色谱性能

结合连续加料降低聚合体系的放热量,及强化体系的换热能力等措施,实现了无搅拌模式聚合体系中温度分布的均一化。通过单次聚合过程构造了体积为38mL的大体积整体固定相。SEM及孔隙率分布测试证明了整体固定相具有均匀的孔结构,动态容量测定及分离蛋白质的实验,表明所制备的径向流动模式整体柱的容量及分辨率不依赖于流速,同时在高流速下具有低背压的特征,可用于生物大分子的分离制备。     

大孔吸附树脂法去除淫羊藿多糖中蛋白的研究

从4种大孔吸附树脂中筛选出ADS-7, 考察了其对淫羊藿多糖中蛋白的去除作用, 并讨论了pH值、 鞣酸、 上样量等对树脂去蛋白效率的影响. 结果表明, 该方法对淫羊藿粗多糖中的蛋白具有较高的去除效率, 淫羊藿粗多糖中的蛋白含量由1.2%下降到0.035%.