T1—2212超导薄膜的制备

以铝酸镧晶体为基片，采用两步法制备T1-2212超导薄膜，包括在低温(150℃)下利用激光脉冲沉积(PLD)工艺沉淀Ba2CaCu2Ox非晶前驱体薄膜和在高温(740～830℃)下前驱体薄膜的铊化结晶、取向生长过程，实验结果表明所制得的膜的相组成为T1-2212，表面存在大量均匀分布的成分为T12Ba2CaCu2Ox的亚微米颗粒，其零电阻温度为101K，薄膜与基片之间界面清晰，没有过渡层，薄膜具有良好的c取向外延条纹。     

Monte Carlo Simulation of Growth of Thin Film Prepared by Pulsed Laser

We use the Monte Carlo simulation method to perform the early growth stage of thin film prepared by pulsed laser deposition.We focus on the number of point defects on the substrate surface varying with the energy density of laser and substrate temperature.The results shows that the laser energy and the substrate temperature strongly affect the morphology and size of the growth islands and the deposition rate of thin film,Our results are in good agreement with the related experimental results.     

Generation of Ultrashort Light Bullets in Dispersive Kerr Media Using the Fourth—Order Dispersion—Dependent Spatiotemporal Instability

A new method for generation of a train of ultrashort pulses or a sequence of ultrashort light bullets is proposed. This method is based on the fourth-order dispersion-dependent spatiotemporal instability in dispersive Kerr media. The repetition-rate of the generated bullets can be made quite large by increasing the corresponding spatial modulation frequency locating in the new instability region resulted from fourth-order dispersion.     

High－Power Blue Light Generation by External Frequency Doubling of an Optical Parametric Oscillator ＊

We report on an all-solid-state high-power quasi-continuous blue light source by the frequency doubling of asignal wave from an optical parametric oscillator (OPO). A 50-mm-long LiB305 (LBO) crystal is used for theOPO, which is pumped by a diode-pumped Nd:YAG green laser (1OkHz, 50ns). Tunable blue emission in a newnonlinear crystal BiB306 (BiBO) is obtained with a wavelength range from 450 to 495 nm. The average power ofthe signal output is as high as 9.3 W from 924 to 970nm. The maximum output of the blue laser with the secondharmonic walk-off compensation is 1.3W average power at 470nm for 6.2W of OPO signal light at 940nm.     

A Two-Photon Femtosecond Laser System for Three-Dimensional Microfabrication and Data Storage

Utilizing the well-focused femtosecond laser with extreme high pulse intensity, we built a two-photon micro-fabrication and data storage system, which was introduced through several functional parts. Based on this homemade system, several three-dimensional microstructures were fabricated by two-photon polymerization, and three-dimensional data storage of six-layers was achieved by two-photon excitation with a photochromic material.     

核物理与等离子体物理——核物理与等离子体物理学科研究进展

编制了一个新的三维光路程序，可以计算任意方向的光线通过网络的轨迹，程序将更准确地模拟真实激光光束在柱型腔靶中的三维传播。设计了平板、球体、柱体等几何体计算模型，通过一系列的检验和考察，证明了程序计算的光路轨迹的可靠性。     

短脉冲激光辐照下金属镜面波纹损伤机理研究

用脉冲Nd：YAG激光(波长1．06μm、半高宽10ns)辐照了多种金属膜层镜面，用光学与原子力显微镜观察到某些样品损伤区或周围有规律的波纹图案，波纹周期从几微米到几十微米。通过分析实验结果，这里提出了波纹产生的光学模型，认为光路系统中某些元件的衍射或者强光与元件表面相互作用过程中产生的干涉可能会导致元件表面波纹状损伤图案。通过理论计算，初步解释了实验中波纹的周期和其他现象。     

紫外激光通信中PPM与Turbo联合编码调制研究

为提高紫外激光通信系统中的编码效率和频带利用率，提出采用PPM（pulse position modulation）调制和Turbo编码相结合的技术来提高效率。此方法不仅能提高频带的利用率，也能提高码间抗干扰能力、纠错能力和降低误码率，并对PPM调制模式下的Turbo码译码公式进行了推导，最后利用Matlab软件实现了该技术的仿真，仿真结果表明：在紫外激光通信中采用PPM和Turbo统一调制编码的技术能进一步降低系统的效率和误码率。     

强激光-固体靶相互作用中高能质子的研究进展

本文介绍了强激光与固体靶相互作用产生高能质子研究中的一些重要物理问题和目前面临的挑战.回顾了强激光与固体靶相互作用中高能质子研究的历史和发展状况;简要叙述了国内外关于高能质子研究的最新进展;总结、评述了高能质子研究过程中关于高能质子的起源和加速机制等问题存在的争议以及需要进一步研究的相关问题.     

激光驱动飞片的动量耦合模型研究

 激光驱动飞片技术在动高压加载和模拟空间高速粒子运动规律等实验中有重要的应用价值。而激光与飞片的动量耦合模型研究是激光驱动飞片技术的重要内容之一,其实质是激光与物质的作用规律的宏观表征。以激光支持爆轰波（LSDW）理论为基础,建立了约束条件下激光驱动飞片的动量模型,模型考虑了激光功率密度、脉宽、聚焦焦斑、侧向稀疏波、飞片表面气体参数、飞片面积等因素的影响,比较全面地反映了LSDW对飞片的力学作用特性,理论计算结果与参考文献结果吻合较好,误差不超过25%。