An approach to the detection of underwater remote target

An approach to the detection of underwater remote target by estimating its backscattering coefficient is presented. The key to this approach is that the echo signal is represented in state-variable model and the back-scattering coefficients of target are contained in dynamic noise of this model, thus underwater target can be detected by estimating this dynamic noise, i.e., deconvolving this model. When all noise statistics are a priori known, an optimum deconvolution algorithm based on the optimum state filter is derived, or else, an adaptive deconvolution algorithm based on the adaptive state filter of alternatively estimating the vector state and the noise statistics is developed. In the final simulation test, an echo signal with SNR equal to -6.1 dB is proceeded using the aforementioned two deconvolution algorithms, respectively, and the results demonstrate good performance of the approach.     

考虑流体湿润性影响的核沸腾RohsenoW修正模型

添加界面活性剂的核沸腾在改变蒸气泡生长特性的同时，主要是强化了对流换热．本文考虑流体湿润性影响，对核沸腾换热沿用最广的对流类比模型－Ｒｏｈｓｅｎｏｗ模型进行了修正．通过对实验数据的检验，表明修正后的模型预示值与实测结果吻合很好．     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

基于界面跟踪方法的汽蚀模型和算法的有效性验证

针对两相附着汽蚀流动机理,基于界面跟踪方法发展了新的汽蚀模型和算法。所发展的汽蚀模型和算法不仅考虑了液相／气相界面处的压力差,而且考虑了耦合Reynolds-Averaged Navier-Stokes方程求解技术得到的流场压力梯度信息来迭代计算附着汽蚀形状。采用具有试验数据的半球形头部圆柱体汽蚀绕流作为算例来验证所提出的汽蚀模型和算法的有效性。采用不同的网格数和松弛因子数值验证了发展的汽蚀模型和算法的有效性。三种汽蚀数下的数值计算结果得到的压力系数分布与试验数据完全吻合。结果表明所提出的汽蚀模型和算法能够准确模拟出汽蚀发生点和汽蚀长度。     

各向异性接合材料界面端部场数值分析

为了求解各向异性接合材料界面端部奇异性应力场,建立了一种新型杂交元模型.该模型的独特之处在于:基于有限元特征法得到的奇异性场数值特征解建立了一种新型界面端奇异单元.通过算例证明,新型杂交元模型能够利用较少的单元数获得较为精确的数值结果.当前模型应用范围广泛,能够用于复杂结构的界面端部场求解.     

突体剖面线型的流噪声机理分析和试验研究

本文在分析突体马蹄涡和湍流脉动压力特性的基础上，在中国船舶科学研究中心０３Ｂ水筒，试验比较了不同剖面线型的突体模型流动噪声，降噪效果３－５ｄＢ，提出了突体部面低噪声设计的实验依据和具体方法。     

Nd2O3掺杂对SnO2气敏性质的影响

SnO_2是目前应用最广的一种气敏材料。我们曾经报道掺入La_2O_3,CeO_2,Pr_6O_(11),和Nd_2O_3后可使半导体元件的灵敏度提高,尤以对乙醇、乙醚、丙酮为显著。掺Nd_2O_3元件对乙炔的灵敏度也有提高。本文考察了SnO_2粒度和被测气氛的物化性质对掺Nd_2O_3元件灵敏度的影响。SnO_2采用水解SnCl_4法制备,纯度经光谱分析测定合格,试样用标准筛分目。在SnO_2中加1wt%Nd_2O_3(光谱纯)和适量水及甲基纤维素,混磨15分钟。将制成的悬浊液滴在一对铂     

动静态界面断裂应力强度因子间的普适关系

1 引言裂纹在速率无关载荷作用下以低于Rayleigh 波速扩展的问题是动态断裂的一项基本课题.其应力强度因子的短期响应(即自裂尖发出的散射波未折返回时裂尖之前的响应)可用含半无穷长裂纹的无穷大构形来模拟.对均匀各向同性材料,Freund(见文[1]的总结)建立了下述普适关系     

"热核"的统计特性和核物质液气相变

用含温度推广的Thomas-Fermi模型讨论了"热核"和核物质的激发能、熵和自由能等热力学函数的温度依赖特性.确定了有限温度下核物质的状态方程,并进而计算了液气相变的临界温度及其对核物质不对称度的依赖关系.     

后处理温度对ZrO2气凝胶超细粉织构和结构的影响

运用神效儿宝治疗小儿厌食症２１０例，总有效率为９５．２％，显效率为６２．４％。该药使用、携带方便、见效快，疗效短，无毒副作用。实验证明，该药能显著提高胃蛋白酶含量，减慢肠管推进性运动，提高动物耐疲劳、耐缺氧能力，提高巨噬细胞吞噬率及血清补Ｃ３含量，且无毒副。作用