The Casimir effect of Reissner-NordstrSm black hole

The stress tensor of a massless scalar field satisfying a mixed boundary condition in a （1 ＋ 1）-dimensional Reissner- Nordstrom black hole background is calculated by using Wald＇s axiom. We find that Dirichlet stress tensor and Neumann stress tensor can be deduced by changing the coefficients of the stress tensor calculated under a mixed boundary condition. The stress tensors satisfying Dirichlet and Neumann boundary conditions are discussed. In addition, we also find that the stress tensor in conformal flat spacetime background differs from that in flat spacetime only by a constant.     

Research on relationships between Lamb wave velocity and static stress in metal plate

On the fact that an isotropic metal solid produces anisotropic property in the state of static stress, based on the theory of the nonlinear acoustoelasticity, the equivalent second order elastic constants are calculated for metal plate with static stress. For the case of thin metal plate with stress, the two kinds of dispersion equation for Lamb waves propagating parallel and vertical to the direction of static stress are derived. Using the equations, the relationships between Lamb wave velocity and static stress in a metal plate are discussed.     

荧光光纤光栅传感特性的实验研究

在载氢掺铒光纤上写入Bragg光纤光栅,得到新型光子学器件-荧光光纤光栅.分别对其Bragg波长（λB）及荧光寿命（τ）的温度（T）及应变（ε）响应特性进行了实验研究,并且给出了λB和τ分别关于（T,ε）的拟合方程.实验结果表明：荧光光纤光栅的λB对T和ε的响应具备一般Bragg光纤光栅的优良特性,测得温度灵敏度为11.1pm /℃,应变灵敏度为1.19pm/με;而且τ对T和ε的响应也具有良好的线性关系,温度灵敏度为0.59 μs/℃,应变灵敏度为6.16 ns/με.实验结论为解决温度应力交叉敏感、实现温度应力的同时监测提供一条新颖的途径.     

Multipartite Entanglement Preparation and Quantum Communication with Atomic Ensembles

We propose an experimentally feasible scheme to generate Greenberger-Horne-Zeilinger type of maximal entanglement among three atomic ensembles, and show one of the applications, controlled secure direct communication. The scheme involves laser manipulation of atomic ensembles, quarter- and half-wave plates, beam splitters, polarizing beam splitters and single-photon detectors, which are within the reach of current experimental technology.     

An Estimation for the Power-Law Distribution Parameter Based on Entropy

A new estimation based on the Shannon entropy for the power-law distribution parameter is presented, The maximum likelihood estimation （MLE） of the parameter is discussed and the relation between the MLE and the moment estimation of the parameter is given out. It is shown that the minimum Shannon entropy estimation is equivalent to the MLE giving the log expectation.     

Chaos Synchronization Criterion and Its Optimizations for a Nonlinear Transducer System via Linear State Error Feedback Control

Global chaos synchronization of two identical nonlinear transducer systems is investigated via linear state error feedback control. The sufficient criterion for global chaos synchronization is derived firstly by the Gerschgorin disc theorem and the stability theory of linear time-varied systems. Then this sufficient criterion is further optimized in the sense of reducing the lower bounds of the coupling coefficients with two methods, one based on Gerschgorin disc theorem itself and the other based on Lyapunov direct method. Finally, two optimized criteria are compared theoretically.     

活塞激光热负荷应力场数值模拟

活塞激光热负荷就是通过光学转光片改变激光在空间的能量分配比例.结合活塞激光热负荷试验工况,建立了活塞激光热负荷应力场模拟数学物理模型,模型中考虑了材料的热物性参数随温度的变化.结果表明:由于活塞顶凹坑位置靠近通油孔,导致其应力波动幅值比激光辐照区域大;活塞凹坑、通油孔和靠近活塞顶面的活塞内腔由于和冷却介质直接接触,是活...     

支撑应力对光刻透镜透射波前畸变的影响

为了设计光刻物镜的支撑结构,建立了支撑应力对透镜透射波前影响的模型,研究了该模型中支撑应力与折射率的关系及支撑应力对透镜透射波前畸变的影响。首先,根据晶体理论,建立了融石英透镜波前畸变与支撑应力之间关系的仿真模型。然后,分析了不同支撑结构下支撑应力与融石英透镜波前的关系。最后,分析了支撑应力造成的透射波前畸变的性质,并选择合适的物镜支撑结构。研究结果表明：光刻物镜支撑结构的支撑应力对透镜的透射波前有很大的影响：3点支撑的波前畸变PV值为3.69 nm;随着支撑点数量的增加,支撑应力造成的透射波前畸变逐渐减少;采用大于9点的支撑结构即可满足光刻投影物镜的元件支撑需求。     

工艺导致的机械应力对深亚微米CMOS器件的影响

随着CMOS器件的不断微缩,硅有源区面积的缩小,工艺导致的机械应力对器件的影响越来越显著,许多工艺步骤会造成有源区应力的累积.应力不仅导致器件性能对版图产生依赖性,而且带来各种可靠性问题,影响芯片的长期使用寿命.在很多情况下,应力相关的问题直接影响芯片制造的良率.在总结各种应力来源的基础上,回顾了到目前为止人们所观察或理解的应力对CMOS器件性能和可靠性的各种影响,提出了分析和解决工业生产中应力相关问题的基本思路. 关键词： 机械应力 CMOS     

聚变实验堆真空室壳体成型残余应力分析

为了了解聚变实验堆真空室壳体表面残余应力的分布以及退火工艺对残余应力的影响,通过模拟分析和实验检测两种方式对不锈钢316LN冷压曲面和热压曲面残余应力进行研究,获得退火前后曲面表面残余应力的大小,得到冷压曲面和热压曲面残余应力的分布以及退火工艺对残余应力分布的影响。研究结果为分析成型工艺提供数据支撑,对中国聚变工程实验堆真空室的研究与制造具有重要意义。