施工项目技术经济综合管理研究

本文主要分析和总结了有关施工项目管理中的人力资源管理、施工质量控制、施工进度与成本控制、合同管理以及信息技术的应用等方面存在的突出问题以及科学、有效的解决办法,可为类似项目管理或研究提供参考．从对施工项目管理研究中得出的结论对加快施工进度、降低工程成本、提高工程质量具有重要的实际意义和广泛推广的经济价值．     

行NA随机变量三角阵列的完全收敛性

令{Xm;1≤i≤n,n≥1}是行NA的随机变量三角阵列．利用NA随机变量序列的一个矩不等式,讨论了行NA的随机变量三角阵列在被随机变量X弱平均控制的条件下的完全收敛性．所得到的结果推广了行独立的随机变量三角阵列相应的结果．     

氧化光栅型垂直腔面发射激光器的研究

通过分析矩形出光孔径和亚波长金属光栅结构,发现大孔径高功率垂直腔面发射激光器(VCSEL)的偏振控制的难点在于横模非常复杂。因此提出一种新型的氧化光栅型VCSEL结构,不仅能够很好地在有源区内引入各项异性的增益结构,并且最大的优势还在于能够完美地控制大孔径VCSEL的横模。通过有限元软件对器件有源区的电流分布进行了模拟,发现当光栅脊的宽度为1.8 μm时,载流子在光栅两端聚集的现象基本上可以消除,而且其电流密度分布差可以达到很高。     

小型内窥镜干涉型光纤陀螺仪装配质量控制系统（英文）北大核心CSCD

提出一种用于干涉型光纤陀螺仪(IFOG)装配质量控制的内窥镜系统设计及相关图像分析方法。同时采用1.0mm与2.4mm工业内窥镜系统采集IFOG内部图像与视频数据;并利用多自由度运动控制平台调节内窥镜工作姿态以保证图像的顺利采集。在此基础上,设计了基于db4小波基的图像增强方法,基于灰度共生矩阵的图像纹理特征估计方法以及图像几何形状特征的计算方法等,用以进行内窥镜图像的分析。通过上述系统与方法的应用,能够有效检测出IFOG产品在装配过程中出现的多余物颗粒、光纤断纤或异常胶粘等质量问题,有效提高了IFOG产品的装配质量。     

HL-2M 装置运行控制技术初步研究

重点介绍了 HL-2M 装置的运行技术和初步的等离子体控制实验结果,包括等离子体放电方案设计、 线圈电流控制、击穿阶段零场匹配和等离子体电流以及位移的控制。为了降低放电运行风险,HL-2M 装置初始放 电采用了简化的放电方案,通过整定 PID 参数实现了线圈电流控制,在击穿阶段获得了 10V 以上的环电压和较大 范围的零场区域,成功实现等离子体击穿。最后,投入了等离子体电流和水平位移反馈控制算法,成功将等离子 体放电脉宽提升至 200ms 以上,且维持 I_p≥100kA 的时间超过了 100ms,上述结果表明 HL-2M 装置运行控制技术 得到了初步的检验。      

Coherent beam combination of adaptive fiber laser array with tilt-tip and phase-locking control

We present an experimental study on tilt-tip(TT) and phase-locking(PL) control in a coherent beam combination(CBC) system of adaptive fiber laser array.The TT control is performed using the adaptive fiber-optics collimator(AFOC),and the PL control is realized by the phase modulator(PM).Cascaded and simultaneous controls of TT and PL using stochastic parallel gradient descent(SPGD) algorithm are investigated in this paper.Two-fiber-laser-,four-fiber-laser-,and six-fiber-laser-arrays are employed to study the TT and PL control.In the cascaded control system,only one high-speed CMOS camera is used to collect beam data and a computer is used as the controller.In a simultaneous control system one high-speed CMOS camera and one photonic detector(PD) are employed,and a computer and a control circuit based on field programmable gate array(FPGA) are used as the controllers.Experimental results reveal that both cascaded and simultaneous controls of TT using AFOC and PL using PM in fiber laser array are feasible and effective.Cascaded control is more effective in static control situation and simultaneous control can be applied to the dynamic control system directly.The control signals of simultaneous PL and TT disturb each other obviously and TT and PL control may compete with each other,so the control effect is limited.     

Hopf Bifurcation Control of a Hyperchaotic Circuit System

This paper is concerned with the Hopf bifurcation control of a new hyperchaotic circuit system. The stability of the hyperchaotie circuit system depends on a selected control parameter is studied, and the critical value of the system parameter at which Hopf bifurcation occurs is investigated. Theoretical analysis give the stability of the Hopf bifurcation. In particular, washout filter aided feedback controllers are designed for delaying the bifurcation point and ensuring the stability of the bifurcated limit cycles. An important feature of the control laws is that they do not result in any change in the set of equilibria. Computer simulation results are presented to confirm the analytical predictions.     

烟气脱硫渣-Mn3O4混合氧载体与煤反应特性研究

基于TG-FTIR联用技术,结合SEM-EDX、XRD和XPS等表征手段,深入研究了煤与烟气脱硫渣制备的CaSO4-Mn3O4混合氧载体的反应特性,重点关注Mn3O4对CaSO4反应活性的提升及其对CaSO4副反应过程气相硫释放的抑制,发现CaSO4-Mn3O4氧载体与煤反应时,通过独特的氧传递特性和利用途径,不仅实现...     

Advanced control and modeling of deposition processes

During the last decade, striking improvements could be achieved for the precise control of deposition processes in optical coating technology. For example, as a consequence of enormous progresses in measure- ment and computer technology, direct optical monitoring in a broad spectral range can be considered as a common tool in many production environments nowadays. Besides the development of the corresponding hardware and measurement channels, advanced approaches for the evaluation of the acquired data and new multiple sensor monitoring strategies moved into the focus of modern research on the way towards de- terministic deposition techniques. In this context, also innovative concepts for the simulation of deposition processes to forecast the result for a specified coating design and automatic online correction algorithms gained of importance to reduce the risk of failure in coating production. The present contribution will be dedicated to selected aspects in this field, especially addressing broad band optical monitoring systems. A short review on examples for existing hardware configurations and software tools will be presented illus- trating the advantages of modern process control techniques. Novel approaches based on the modeling of thin film growth are discussed as an additional strategy to improve the predictability of coating processes.     

基于改进的主动控制法实现混沌系统广义投影同步

通过引进特殊矩阵构造并基于Lyapunov稳定性理论,提出了一种改进的主动控制法来实现混沌系统的广义投影同步.改进后的主动控制不依赖于罗斯-霍维兹判据,与未改进的主动控制相比,简化了相关运算步骤和复杂度.通过对混沌能源系统和Nuclear Spin Generator系统的研究,并与其他同步方法进行比较,说明了该方法具有简单,直观,稳健,高效等优点,且对混沌系统的自结构和异结构广义投影同步均适用.数值模拟的结果进一步表明了该方法的有效性和理论分析的正确性. 关键词： 改进的主动控制 广义投影同步 特殊矩阵构造