An Integrated Theory of Adsorption and Partition Mechanism and Eash Contribution to Solute Retention in Reversed Phase Liquid Chromatography

With the combination of the the stoichiometric displacement model for retention (SDM-R) in reversed phase liquid chromatography (RPLC) and the stoichiometric displacement model for adsorption (SDM-A) in physical chemistry,the total number of moles of the re-solvated methanol of stationary phase side.nr,and that of solute side in the mobile phase,q,corresponding the one mole of the desorbing solute,were separately determined and referred as the characterization parameters of the contributions of the adsorption mechanism and partition mechanism to the solute retention,respectively.A chromatographic system of insulin,using mobile phase consisting of the pseudo-homologue of alcohols(methanol,ethanol and 2-propanol)-water and trifluoroacetic acid was employed.The maximum number of the methanol layers on the stationary phase surface was found to be 10.6,only 3 of which being valid in usual RPLC,traditionally referred as a volume process in partition mechanism.However,it still follows the SDM-R.Both of q and nr of insulin were found not to be zero,indicating that the retention mechanism of insulin is a mixed mode of partition mechanism and adsorption mechanism.When methanol is used as the organic modifier,the ratio of q/nr was 1.13,indicating the contribution to insulin retention due to partition mechanism being a bit greater than that due to adsorption mechanism.A linear relationship between q,or nr and the carbon number of the pseudo-homologue in the mobile phase was also found.As a methodology for investigating the retention mechanism retention and behavior of biopolymers.a homologue of organic solvents as the organic modifier in mobile phase has also been explored.     

镓在氨基吡啶树脂上的吸附行为及机理

前文已报道了氨基吡啶树脂对AuCl_4~-、PtCl_6~(2-)的吸附性。本文报道4-氨基吡啶树脂对镓的吸附行为与机理。在6mol/L HCl条件下,对镓的氯络阴离子(GaCl_4~-)有很好的吸附性。并能定量洗脱。测得静态吸附容量为351.15mg/g树脂,用化学法及红外光谱等方法,测得4-氨基吡啶树脂吸附镓(Ⅲ)的基本参数。     

元素在石墨炉内石墨探针表面上的原子化机理研究 ⅩⅢ.钼的原子化机理

本文应用x-射线衍射(XRD)、X-射线光电子能谱(XPS)、俄歇电子能谱(AES)、扫描电子显微技术(SEM)研究了钼酸铵在石墨炉内石墨探针表面上的原子化机理。实验结果表明,在温度<1350K时,钼酸铵经历MoO_3和Mo_4O_(11)中间产物转变为MoO_2(s)。在更高温度下,MoO_2(s)首先还原为Mo_2C,而后进一步转变为MoC(s)。MoC再分解为Mo(s)。钼的原子化起源于Mo的升华。     

聚合物异核交叉弛豫及二维NOE谱

The heteronuclear cross-relaxation rates in polymers were determined by selective and conventional ~(13)C spin-lattice relaxation experiments, the proton-carbon distances were calculated by the theoretical formula, and two-dimensional NOE spectra of the polymers were also measured. The results showed that (1) the measured proton-carbon distances coincide with the distances from molecular models, (2) there is the observable dipolar cross-relaxation effect between the quaternary carbons and their neighboring protons, and (3) the optimum mixing times depend on the relaxation properties of the proton and carbon.     

用~(13)C NMR弛豫研究星形聚苯乙烯在溶液中的分子运动(Ⅱ)

对不同支化度和不同支链链长的20％(W/V)星形聚苯乙烯溶液测定了~(13)C NMR弛豫参数,用1g-x~2分布、Cole-Cole分布和构象跳跃模型对主链的分子运动进行了分析讨论,并对芳环侧基的内旋转运动也进行了分析,求出了活化能和跳跃速率。结果表明,轻度化学交联对相关时间分布有一定影响,对链段运动的势垒没有明显影响。支链链长对~(13)C NMR弛豫的影响和对线形聚合物的影响是类似的。     

钾光卤石溶解动力学

研究了钾光卤石在不同分解液及不同温度的溶解机制，建立了溶解及结晶动力学方程     

高酸度下二(2-乙基己基)亚砜萃取钯的机理研究

本文研究了DEHSO在[HCl]=8N条件下萃取Pd(Ⅱ)的机理,通过斜率法、Asmus法、饱和法确定了亚砜的配位数。并通过萃合物的元素分析、紫外光谱和红外光谱的研究推断出萃合物的组成、结构和萃取反应机理。     

石油焦活化机理的研究

研究了石油焦在高温、碱性条件下的活化机理。扫描电镜和低温N2吸附法测定孔结构结果表明，石油焦在750 ℃～800 ℃下活化得到的产品，比表面达2 900 m2/g，微孔率到90%，吸附甲烷的体积比为115∶1，是较理想的活化反应温度范围。气相色谱分析结果证明，在活化过程中产生的气体为H2，CO2，CO，CH4。X射线衍射结果表明，吸附剂产物属于部分石墨化的无定形体。     

有机金属化合物降低柴油机炭烟排放及其机理的研究

在直喷式柴油机上按自由加速法进行了柴油机炭烟排放试验，考察了8种有机金属化合物降低炭烟排放的效果，并对其作用机理进行了研究。实验表明，8种有机金属化合物均能有效降低炭烟排放，降烟效果顺序为二壬基萘磺酸钡>二茂铁>环烷酸铁>石油磺酸钡>环烷酸锰>环烷酸铜>环烷酸钡>环烷酸铈。在纯柴油中添加4‰二壬基萘磺酸钡时，降低炭烟排放40.7%；添加1‰二茂铁时，降低炭烟排放35.3%。试验还表明，有机结构影响有机金属化合物的降烟效果，同时影响着它在添加量上的感受性。炭烟的生成，主要与生成的乙炔（C2H2）和多环芳香烃（PAH）有关，而炭烟的氧化则与炭烟周围氧浓度和炭烟颗粒表面积有关。多数有机金属化合物本身携氧，能使燃油迅速分解生成CO，CO的增加使PAH明显减少，从而抑止炭烟的生成。茂型金属有机物能活化CO分子，进而有效抑止炭烟先导物的生成。     

催化裂化装置沉降器内结焦的微观结构及其生长过程的分析

对催化裂化装置（FCCU）沉降器内结焦的微观结构进行分析，结果表明，结焦形态主要有4种，丝状焦、滴状焦、块状焦和颗粒状焦。各种结焦形态的成因机理不同，微观结构及生长过程也不同。丝状焦是由铁、镍金属元素催化烃类气体，以及易生焦物发生脱氢缩合反应，以催化剂颗粒形成结焦中心并逐渐长大形成细丝状焦炭；滴状焦是由稠环芳烃脱氢缩合反应而生成，高沸点未汽化油滴黏附在催化剂颗粒或器壁表面形成“焦核”，即由重芳烃、胶质、沥青质脱氢缩合反应和二烯烃聚合环化反应而生成的；块状焦是高沸点未汽化油滴相互溶解后，再脱氢缩合反应或聚合环化反应而形成的结焦；颗粒状焦是油气在气相中脱氢缩合反应或聚合环化反应形成的微小结焦颗粒相互团聚形成的颗粒簇。催化裂化装置沉降器内的结焦一般是上述几种结焦过程的组合，是催化结焦和非催化结焦过程共同作用的结果。