薄膜-泡沫复合平面调制靶的制备

利用浇注法制备了具有正弦波调制图纹的溴代聚苯乙烯薄膜,并在此基础上将低密度聚-4-甲基-1-戊烯(PMP)泡沫溶胶浇注在薄膜调制图纹的表面,从而得到了薄膜-泡沫复合平面调制靶样品。较为详细的讨论了具有正弦波调制图纹的复合平面调制靶的制备方法并通过台阶仪、显微镜观测了薄膜表面条纹的起伏以及薄膜-泡沫截面的复合情况,实验结果发现,采用此种方法得到的复合平面调制靶样品,其薄膜厚度、泡沫密度易于控制,薄膜、泡沫调制界面清晰,易于微靶的加工与装配。     

一种易于硬件实现的图像有损压缩算法

原始图像数据经过小波变换后,根据子带系数之间在空间上和方向上所呈现出的带间相似性,将像素集合重新定义为集合树。通过对直流系数量化编码和交流系数比特深度编码中的参数K和熵编码中长度分别为3bit码字（choicel）和4bit码字（choice2）的编码方式的选择实现数据的渐进性编码,使产生的码流具有内嵌特性,可以对任意码流进行截取和译码,实现对码率的有效控制。提出了一种具有复杂度低、易于硬件实现的图像有损压缩算法。经过系统仿真证明此算法有利于提高重建图像的质量。     

Stimulated Emission from a TiO2 Particle-Dispersed Dye Polymer Plane Waveguide

We report the stimulated emission from a dye doped polymer plane waveguide with TiO2 particles. This waveguide consists of a poly （methylmethacrylate） （PMMA） film containing laser dye DCM as a gain medium. The emission spectrum of the film pumped by the Nd：YAG laser is different from the amplified spontaneous emission of the dye-doped film without particles. It is shown that when the excitation intensity reaches the threshold 9.6 μJ, the broad band emission spectrum narrows into multiple separate peaks with central wavelength of 608 nm. The linewidth of the sharp peak is 0.5 nm. According to our analyses, this phenomenon is due to the multiscattering of the disordered TiO2 particles inside the gain polymer film.     

Anion Mass Spectrometry Study of Ion-Pair Photodissociation of CO2 in the XUV Energy 19.70-22.24eV

We demonstrate anion mass spectrometry using the Hefei synchrotron radiation source to investigate the ion-pair dissociation processes of molecules. The efficiency curve of the O^- anionic product via ion-pair dissociations of CO2 is recorded with tunable extreme vacuum ultraviolet photons （energy： 19.70-22.24 eV） and compared with the spectrum available in the literature. The possible dynamics of CO2 ＋ hv → CO^＋＋ O^- in this energy range is discussed.     

A Non-Zero Hadronic Elliptic Flow with a Vanished Partonic Elliptic Flow in a Coalescence Scenario

The elliptic flow of a hadron is calculated using a quark coalescence model based on the quark phase space distribution produced by a free streaming locally thermalized quark in a two-dimensional transverse plane at initial time. Without assuming the quark＇s elliptic flow, it is shown that the hadron obtains a non-zero elliptic flow in this model. The elliptic flow of the hadron is shown to be sensitive to both space momentum correlation and the hadron＇s internal structure. Quark number scaling is obtained only for some special cases.     

Coupling of Acoustical Plane p-Wave to a Cased Borehole

Theoretical and numerical study on the coupling acoustic field of the plane p-wave to a cased borehole is carried out. The medium outside the cased borehole is modeled as the porous medium. The scattering field characteristics in the cased borehole are investigated when a plane fast p-wave is incident in tilt to the cased borehole from the porous medium. The scattering fields inside and outside the cased borehole are analyzed and deduced by Biot＇s theory under the boundary conditions on each interface, and they are numerically studied. It is found that the scattering field has strong resonant characteristics and there exists a series of resonant frequencies and peaks. The effects of the frequency, radii of each interface, incident angle, porosity, and other parameters on the resonant acoustic field have been investigated in detail in the fast and slow formations respectively. The resonant characteristics of the scattering field are also analyzed from the physical sense.     

平面三维显示技术的研究现状

平面三维显示技术是近年来最新出现的虚拟现实显示技术,其最大的特点是观察者无需使用任何辅助附加设备,直接用肉眼就可看到屏幕上显示的三维图像。为推进三维显示技术的发展,进一步研究了视差立体成像原理,并据此介绍几种平面三维显示方法及其工作原理,包括障栅立体显示、微柱透镜阵列立体显示、偏振片立体显示和基于微柱透镜立体显示原理的多视点系统,阐述并分析了系统的优缺点。以日本三洋公司的四视角立体显示装置、南京大学的多视点三维显示系统和NEC液晶科技的HDDP三维显示系统为例,描述了国内外该项技术近期的研究现状,分析了存在的技术难点,展望了该应用领域的发展前景。     

柱状分层固体媒质的声散射

本文评述了各向同性和横向各向同性柱状分层固体声散射理论和实验研究进展介绍了描述圆柱状界面薄层特性的弹簧模型，也讨论了该领域中有待进一步研究的一些问题。     

矩量法研究平面波导点缺陷引起的散射损耗

对平面波导工艺过程里出现的点缺陷,如气泡、灰尘颗粒等对平面波导内光场造成的散射提供了一种简单而又实用的计算方法。计算基于格林函数方法,并利用矩量法求解积分方程,采用分块矩阵优化算法,使得算法的计算时间直接与点缺陷大小相关,提高了效率。证明了一定大小的点缺陷在特定的波长处会产生很大的散射损耗,证明点缺陷的散射损耗依赖于缺陷大小和光学性质而与其在波导中的位置无直接关系。以二氧化硅平面波导为例,分析了对中心波长1．55μm的入射光场,分别存在气泡和灰尘颗粒两种点缺陷时,散射损耗随点缺陷大小的关系特性,指出工艺过程特别应该避免某些孔径的点缺陷。     

980nm单模运转未镀增透膜光纤光栅激光器

提出了一种工艺简单的980nm未镀增透膜的光纤光栅外腔半导体激光器。首先从理论上分析了边模抑制比(SMSR)与激光二极管前表面反射率R2、外腔长Lext和激光二极管一光纤耦合效率之间的关系,得出边模抑制比随R2和Lext的增大而减小,而随着激光二极管一光纤的耦合效率的提高而增大。从计算结果中还可以看出,即使半导体激光器不镀增透膜(R2=0．3时)。在其它参量合适的情况下,边模抑制比仍可大于40dB。然后,对其进行实验验证。在半导体激光器未镀模的情况下,选择光纤光栅发射率为0．5,外腔长为12．5cm,输人电流为28．8mA(约为阈值电流的2．4倍)时,通过仔细调节恒温、恒流电路,实现了边模抑制比高于40dB的稳定的单纵模输出,外腔激光器的线宽优于1．6MHz。