单片集成微环反射器可调谐半导体环形激光器理论和数值模型(英)

设计了一种新颖的快速可调谐激光器。这种激光器在恒定电流泵浦的有源微环组成的半导体环形激光器腔外部集成一个可调谐的无源微环反射器,其结构将决定激光器激射腔模的有源腔和无源可调谐部分分离,有助于提高调谐速度。与光栅结构的激光器相比,该激光器结构简单,具有强烈的选模功能,不需要相位匹配部分,输出波长不受调谐部分热效应的影响。基于多模速率方程建立了激光器的理论和数值模型,数值仿真结果表明该激光器能在选取的15个腔模范围内完成数字调谐,且具有40 mA的较低阈值电流和适中的边模抑制比。     

基于虚拟仪器的压电陶瓷驱动技术研究

针对压电陶瓷驱动器的非线性应变,以压电陶瓷微位移驱动原理为基础,分析了扫频激光器腔长控制原理;在硬件时钟的定时下,分析了压电陶瓷的驱动特性,并通过调整驱动信号的步长电压来调节压电陶瓷的非线性。设计了基于虚拟仪器的控制系统,并对线性化方法进行了原理分析和实验。实验结果表明,该测量系统可以使压电陶瓷在其伸长范围内线性地伸长。     

KGW晶体外腔式高功率579nm喇曼黄光激光器

报道了579nm高功率KGd(WO4)2喇曼晶体外腔式喇曼黄光激光器的输出特性.基于808nm脉冲激光二极管侧面泵浦Nd∶YAG陶瓷、腔内BBO电光晶体同步延迟调Q和Ⅰ类临界相位匹配的LBO晶体腔外倍频方案,并通过外腔式KGW晶体Ng轴二阶斯托克斯喇曼频移,获得了579.54nm黄光激光输出.当脉冲信号重复频率为1kHz、532nm泵浦光最高平均功率为5.02W、脉冲宽度为10.1ns时,获得了最高平均功率2.58 W、脉冲宽度7.4ns、峰值功率348.6kW的579.54nm二阶斯托克斯喇曼黄光激光输出;532nm至579.54nm的光-光转化效率为51.4%、斜率效率为54.8%,光束质量因子Mx2-579.54=5.829、My2-579.54=6.336,输出功率不稳定性小于±2.35%.实验表明:外腔式喇曼结构能够高效地获得喇曼黄光,具有很高的光-光转化效率及良好的功率稳定性,并通过脉冲LD结合同步延迟电光调Q可获得高重复频率、高平均功率、窄脉冲宽度和高峰值功率的黄光激光输出.     

金属-电介质约束的半导体微盘激光器

设计了一种以半导体材料InGaAsP作为核心结构的器件表面蒸镀二氧化硅膜层,在其上蒸镀金膜层,构成金属电介质半导体微盘激光器结构,盘面的厚度为2μm,盘面半径为6 μm ,盘壁侧表面与底面的夹角为45°.使用有限元法对该结构器件的回音壁模式进行数值研究.利用所谓“偏微分方程的弱项形式”有效地抑制了许多局域不变性相关的“伪解”.通过数值求解弱项型矢量亥姆霍兹方程,得到微盘激光器回音壁模式的横磁场分布,在此基础上讨论了其品质因数(Q值)、模体积、不同金属和电介质膜厚度对器件品质因数的影响、盘的半径和其品质因素的关系等相关量,理论计算表明,这种结构的器件较直接在介质表面蒸镀金属膜层结构的器件的品质因数高2～3倍,实验还获得了基阶和高阶的表面等离子体波模式,以及品质因数最大达到约5100的光学-电介质基模.     

非线性延迟响应对啁啾类孤波的影响

以描述超短光脉冲在光纤中传输的高阶非线性Ginzburg-Landau方程为模型,给出了包含三阶色散,自陡效应以及非线性延迟响应等效应的锁模激光器系统的啁啾类孤波解,并采用分步傅立叶方法对该解析解的稳定性进行了详细的分析。结果表明:在一定的系统参数条件下,即使存在一些微弱的扰动,这类啁啾类孤波解依然可以稳定地存在并传输较长的距离。如果初始输入脉冲为任意的高斯脉冲,在经过一段传输距离的演化后,啁啾类孤波解形成并可以稳定传输。     

Passively mode-locked Tm,Ho:YVO4 laser based on a semiconductor saturable absorber mirror

We report the demonstration of passively continuous-wave mode-locking(CWML) of diode-pumped Tm,Ho:YV04 laser using an InGaAs/GaAs multiple quantum-well(MQW) structure semiconductor as the saturable absorber.Stable mode-locking pulses at the central wavelength of 2 041 nm are obtained. The maximum output power is 151 mW.The pulse duration is 10.5 ps at the repetition rate of 64.3 MHz.     

Experimental study of an ultra narrow linewidth fiber laser by injection locking

An ultra narrow linewidth fiber laser is presented, which is composed of a ring cavity laser and a linewidth-narrowing module. The fiber laser is introduced in detail and the single mode operation of the laser is verified. Using a revised self-heterodyne detection method, experimental data of the laser linewidth against the pump power are presented. The narrowest linewidth is measured to be 109 Hz, whereas the output power is 1.1 mW.     

Method to identify time delay of chaotic semiconductor laser with optical feedback

We propose a power spectrum analysis method to directly identify the time delay of a chaotic semiconductorlaser with optical feedback. By measuring the radio frequency (RF) power spectrum of the chaotic laserand performing an inverse Fourier transform, we can easily unveil all the time delay signatures, regardless ofwhether the chaotic output is induced by single or multiple feedback. This method successfully retrieves thetwo time delay signatures from the power spectrum of a semiconductor laser with double-cavity feedback.     

Analysis on FM-to-AM conversion induced by spatial filter in a high-power laser system

In order to avoid stimulated Brillouin scattering and smooth the final focal spot that reaches the D-T capsule, spectral broadening is essential. However, the modulation of spectral structure might result in frequency-to-amplitude modulation (FM-to-AM) conversion. The spatial filter pinhole is used to cut off the high-frequency transmission laser, and to ensure the desired pass. Improper parameter of pinhole would lead a negative impact. Using the spatial filter pinhole, we analyze the characteristic of intensity modulation using several pinholes of improper parameters. We then compare these results with the intensity modulation obtained from an experiment. Experimental diagnosis and design of an appropriate pinhole parameter would be highly beneficial to the field of high-power lasers.     

Simulation of 60-GHz microwave photonic filters based on serially coupled silicon microring resonators

The microwave photonic filters (MPFs) based on serially coupled silicon microring resonators (MRRs) are theoretically analyzed for the application of 60-GHz millimeter wave wireless personal area networks. This is achieved by calculating the improvement of bit error ratio (BER). According to the simulation results, the requirement of signal-to-noise ratio (SNR) of the received data can be reduced by 14 dB for the same BER with and without MPFs. The performance of the MPF with five serially coupled microring structures is better than that of the MPF with a single microring, owing to the improvement of the shape factor.