Electrospinning of nylon-6,6 solutions into nanofibers: Rheology and morphology relationships

The relationship between the rheological properties of nylon-6,6 solutions and the morphology of their electrospun nanofibers was established. The viscosity of nylon-6,6 in formic acid(90%) was measured in the concentration range of 5 wt%-25 wt% using a programmable viscometer. Electrospinning of nylon-6,6 solutions was carried out under controlled parameters. The chemical structure, morphology and thermal properties of the obtained nanofibers were investigated using Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM) and differential scanning calorimetry(DSC), respectively. Entanglement concentration(ce) was found to be 15 wt% and a power law relationship between specific viscosity and solution concentration was observed with exponents of 2.0 and 3.3 for semi-dilute unentangled(c ce) and semi-dilute entangled(c ce) regimes, respectively. The diameter and uniformity of the nanofibers were found to be dependent on the viscosity. Moreover, the average diameter of electrospun nanofibers was found to be dependent on zero shear rate viscosity and normalized concentration(c/ce) in a power law relationship with exponents of 0.298 and 0.816, respectively. For nylon-6,6 solutions, the entanglement concentration(ce = 15 wt%) provides the threshold viscosity required for the formation of a stable polymeric jet during electrospinning and producing uniform beadless fibers. For concentrations less than ce, beaded fibers with some irregularities are formed. DSC analysis showed an increase in crystallinity of all electrospun samples compared to original polymer. Furthermore, Based on FTIR spectroscopy, α phase is dominant in electrospun nanofibers and minor amount of β and γ phases is also available.     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.     

差示扫描量热法测定比沙可啶的纯度

建立差示扫描量热法测定比沙可啶原料药样品纯度的方法。考察了炉体气氛、升温速率、称样量3个因素对差示扫描量热法测定结果的影响,确定差示扫描量热法最佳实验条件:升温速率为2.0 K/min,称样量为2.0~4.0 mg,炉内气体为静态空气。差示扫描量热法测定比沙可啶样品纯度为99.86%,测定结果的相对标准偏差为0.02%(n=6),差示扫描量热法测定比沙可啶样品纯度值与HPLC测定结果具有良好的一致性。该方法可以快速、准确地测定比沙可啶化学纯度,为比沙可啶纯度测定提供了一种新的分析方法。     

[100]LiF单晶在60 GPa以内冲击加载下的高压屈服强度特性

获取光学窗口自身的高压强度特性是开展材料高压高应变率冲击响应行为精密测量和数据反演的重要基础。利用平板撞击和双屈服面法,通过冲击-卸载、冲击-再加载原位粒子速度剖面精细测量和数据反演,获得了约60 GPa范围内[100]LiF屈服强度特性随冲击压力的变化规律。结果表明:在实验压力范围内,[100]LiF的屈服强度随加载压力的提高而显著提高,压力硬化效应显著;同时,LiF在冲击加载下的屈服强度高于磁驱准等熵加载结果,应变率硬化效应强于热软化效应。采用Huang-Asay模型确定了可描述冲击加载[100]LiF强度特性的本构模型参数,为LiF在强度、相变、层断裂等加窗测量实验中的深入应用和数据准确解读提供了重要支撑。     

差示扫描量热法测定除草剂绿麦隆的纯度

研究了用差示扫描量热法(DSC)测定绿麦隆的纯度。该法测定最佳条件为升温速率0.5 K.min-1,样品量2~3 mg,保护气流速20 mL.min-1。用本法测得绿麦隆原药的纯度为98.35%,相对标准偏差(RSD)为0.034%,测定结果与已知纯度相符。并将测定结果与高效液相色谱(HPLC)法进行了比较。该法具有操作简便,样品用量少,准确度和精密度均较高等优点。     

同步荧光法同时测定苏丹红Ⅱ和苏丹红Ⅲ

开展了苏丹红的荧光分析研究, 为快速检测苏丹红提供了新的方法. 所建立的恒波长同步荧光法可同时对苏丹红Ⅱ和Ⅲ进行定性定量检测. 荧光方法具有很大的应用前景, 有望成为苏丹红的常规、快速、 简便的检测方法.     

二芳酮-可聚合胺紫外光引发1,6-己二醇二丙烯酸酯聚合的动力学研究

用Photo-DSC(光差热扫描)研究了一种可聚合胺助引发剂乙二醇-3-吗啡啉丙酸酯甲基丙烯酸酯(EGMPM)分别与二苯甲酮(BP)、4-(4-甲苯硫基苯基)苯基甲酮(BMS)、4-氯二苯甲酮(CBP)、4-氯甲基二苯甲酮(CMBP)、4-羟甲基二苯甲酮(HMBP)等二芳酮组成的光引发体系引发以1,6-己二醇二丙烯酸酯(HDDA)为单体的紫外光聚合动力学.考察二芳酮质量分数、聚合温度、光照强度对其光聚合动力学影响,并评价其引发效果;同时计算出了EGMPM/BP引发HDDA聚合体系的活化能.结果表明,二芳酮的质量分数增加时,反应达到最大反应速率的时间减少,单体的转化率也相应增加,单体聚合速率相应增大;相同质量分数(0.1%)的不同二芳酮,BMS体系达到最大反应速率的时间最短,单体转化率也最高;随着温度和光强的增加,单体最终转化率、最大反应速率增大,达到最大反应速率所需的时间减少.     

先进的微生物芯片检测系统及其应用

发展了一种先进的微生物芯片检测方法,并研制用于芯片检测的新型数字化成像扫描检测系统。采用激光诱导荧光的检测原理设计一种新颖的CCD数字化成像扫描检测系统结构,荧光信号采集端的数值孔径NA=0．72,工作距离3．22 mm,系统检测灵敏度小于每平方微米1个荧光分子。以微生物大肠杆菌和黄单胞菌检测为例,设计基因芯片,并应用所研制的芯片检测系统实现了微生物的正确鉴定,提供了一种高效的食品安全检测整体解决方法。实验结果表明两种微生物的芯片检测实验结果稳定可靠,与国外共焦扫描仪检测的结果完全一致。     

地球同步轨道二维扫描像移补偿技术建模与分析

在建立二维扫描观测模型的基础上,提出了基于椭球体地球模型的二维扫描像移补偿方案,给出了任意空间观测到的目标位置的快速迭代算法,并以真实轨道和仿真姿态数据验证了像移补偿模型的实际性能。仿真结果表明,对于长周期(大于一个东西方向扫描行周期)轨道和姿态偏差,可以通过调整仪器坐标系内的扫描轨迹来实现像移补偿;同时,在现有轨道测量和控制条件下,轨道因素引起的瞬时方位角和俯仰角补偿量在0.01°~0.1°量级,且随轨道位置不同而变化。FY-2C卫星在轨偏航轴姿态失配修正实例证实了上述模型的有效性。     

新颖的双通道输出高功率掺铒光纤宽带光源

在分析L波段放大自发辐射(ASE)谱产生原理的基础上,设计出一种新颖的双级结构掺铒光纤ASE宽带光源,该光源可在两个端口分别输出高功率的C波段和L波段的ASE谱.设计将C波段ASE谱注入到掺铒光纤中作为L波段ASE谱的二次抽运源,使得L波段ASE谱功率得到了有效提高.优化光源结构参量后从两个端口分别获得了12.97 dBm和12.81 dBm的C波段和L波段ASE宽带谱.将两个输出端口组合得到了功率为15.9 dBm,泵浦转换效率达到21.6%的C+L波段超宽带ASE光源.