关于非平行板电容器电容计算的讨论

用串联方法计算非平行板电容器的电容，简便地得到与其他方法相同的结果。     

燃煤烟气中As、Se、Pb的形态分布及S、Cl元素对其形态分布的影响

基于化学热力学平衡分析方法，计算分析了燃煤烟气中重金属As、Se、Pb的形态分布规律，研究了S、Cl等元素对As、Se、Pb的形态分布规律的影响。结果表明，氧化性气氛下，As以As₂O₅、As₄O₆、AsO等氧化物的形式存在；Se主要以SeO₂形式存在；Pb在1000 K以下主要是固态PbSO₄，1200 K以上为气态PbO。还原性气氛下，As在较低温度时为固态As₂S₂，900-1400 K以As₂、AsS、AsN气体共存，2000 K以上全部转化为气态AsO。Se在1100 K以下主要以气态H₂Se存在，1100 K开始生成SeS和Se₂气体，1800 K时主要是气态Se和少量气态SeO；Pb在中低温时主要是PbS，1800 K以上气态Pb为主要存在形态。S在还原性气氛下增大了AsS（g）、PbS（g）、SeS（g）的比例，氧化性气氛下对As、Se、Pb形态分布基本无影响；Cl无论在氧化还是还原气氛下对As、Se影响均较小，但对Pb的形态分布影响较大。     

静电场中零电势点的确定和电势的计算

在静电场中,零电势点位置的确定,对电势计算的方便与否起着致关重要的作用.下面就4种情况,简述零电势点位置的确定及相应电势的计算公式.1 点电荷电场中各点电势的计算 例1 设一带电量为Q的点电荷,放在相对电容率为εT的无限大均匀电介质中,求空间各点的电势.     

用改进嵌入原子法计算Cu晶体的表面能

用改进嵌入原子法(MEAM)计算了Cu晶体12个晶面的表面能.结果表明，密排面(111)的表面能最小.其他晶面的表面能随其晶面与(111)晶面夹角的增加而增加，据此可以粗略地估计各晶面表面能的相对大小.给出的几何结构因子的确定方法及结果可以直接用于计算其他面心立方晶体的表面能及其他特性.在Cu,Ag等面心立方薄膜中出现(111)择优取向或织构的机理是表面能的最小化. 关键词： 改进嵌入原子法 铜 表面能 计算     

激光与材料参数对瞬态SBS 诱导的激光超声破坏效果的影响

 通过数值求解一维瞬态受激布里渊散射（SBS）声光耦合波方程，从理论上分析了泵浦激光参数及光学材料参数对SBS过程发生阈值的影响。以SBS过程中建立起来的应力场抗拉（压）强度和散射场的反射率为判据，分析了激光脉宽及作用区域长度对激光超声破坏材料效果的影响，探讨了短脉冲激光（约ns）引起的激光超声对材料的破坏机理；讨论了通过参数配置有效遏制SBS过程激光超声对光学材料的破坏问题。     

某类系统广义指数型E稳定性(英文)

研究某类系统广义指数型 E稳定性 ,推广了文献 [1 ],[2 ]的某些结果 .     

Calculation of the Specific Heats for the Ⅱ—Ⅲ and Ⅱ—Ⅳ Phase transitions in NH4I

This study gives our calculation for the specific heats CVI due to an Ising model using the observed Cp data for the Ⅱ-Ⅲ and Ⅱ-VI phase transitions in NH4I.By fitting to the CP data we determine the values of the critical exponent for the pressure of 0.14GPa(Ⅱ-Ⅲ phase transition)and for the pressures of 0.75,1.35and 1.97 GPa (II-IV phase transition)in NH4I.Our exponent values values are close to the predicted values of the specific heat in a three-dimensional Ising model.Our calculated CVI are in good agreement with the experimental CP for NH4I in most cases.     

THE COUPLING OF NATURAL BOUNDARY ELEMENT AND FINITE ELEMENT METHOD FOR 2D HYPERBOLIC EQUATIONS

In this paper, we investigate the coupling of natural boundary element and finite element methods of exterior initial boundary value problems for hyperbolic equations. The governing equation is first discretized in time, leading to a time-step scheme, where an exterior elliptic problem has to be solved in each time step. Second, a circular artificial boundary FR consisting of a circle of radius R is introduced, the original problem in an unbounded domain is transformed into the nonlocal boundary value problem in abounded subdomain. And the natural integral equation and the Poisson integral formula are obtained in the infinite domainΩ2 outside circle of radius R. The coupled variational formulation is given. Only the function itself, not its normal derivative at artificial boundary ΓR, appears in the variational equation, so that the unknown numbers are reducedand the boundary element stiffness matrix has a few different elements. Such a coupled method is superior to the one based on direct boundary element method. This paper discusses finite element discretization for variational problem and its corresponding numerical technique, and the convergence for the numerical solutions. Finally, the numerical example is presented to illustrate feasibility and efficiency of this method.     

Numerical Calculation and Analysis of Track Etching Process

Heavy ion irradiated polymers can be chemically etched to form track membrane with pores in the micro and sub-micro ranges. It has been reported that pore growth during etching can be related to track structures. A latent track has a track core inside and a track halo surrounding the track core. By single track etching it is observed that etching in the track core is much faster than in the track halo where the etching rate is even lower tlian that of bulk material. For multi-track etching, no such stages can be seen by the conductance measurements.