三点弯曲试件DSIF近似计算几种模型的比较

在目前的材料动态起裂韧性实验测试中，一般采用三点弯曲试件，并用试件裂纹起裂时的动态应力强度因子（DSIF）K1值表征材料的动态起裂韧性。但是，迄今为止，还没有较好的近似分析方法计算冲击加载下试件的DSIF以及准确判定试件的起裂时间，因此，也没有建立统一的标准测试材料的动态起裂韧性。     

Analytic solutions to a finite width strip with a single edge crack of two-dimensional quasicrystals

In this paper, we investigate the well-known problem of a finite width strip with a single edge crack, which is useful in basic engineering and material science. By extending the configuration to a two-dimensional decagonal quasicrystal, we obtain the analytic solutions of modes I and II using the transcendental function conformal mapping technique. Our calculation results provide an accurate estimate of the stress intensity factors K_I and K_II, which can be expressed in a quite simple form and are essential in the fracture theory of quasicrystals. Meanwhile, we suggest a generalized cohesive force model for the configuration to a two-dimensional decagonal quasicrystal. The results may provide theoretical guidance for the fracture theory of two-dimensional decagonal quasicrystals.     

静电场边值问题的矩量法解

本文采用修正格林函数积分方程的矩量法数值解技术求解静电场边值问题。这种方法具有较边界积分法积分域小的特点,不仅有高的计算效率和精度,尤其适用于有无限延伸导体边界的边值问题。本文着重讨论与传输线问题等效的边值问题,这是典型的二维静电场问题,对高频和微波技术有重要的实用价值。本文方法也适用于三维静电场问题和交变电磁场问题。     

碳纳米管的近边吸收谱研究

用X射线近边吸收谱研究了单壁, 双壁和多壁碳纳米管在超高真空系统中不同温度下退火处理后的行为.碳的K边吸收谱表明, 多壁管上吸附的杂质将在热处理过程中最先被去除, 其次是双壁管, 最后是单壁管.这种热处理下杂质去除的顺序说明了曲率越小杂质吸附得越牢靠, 即越容易吸附杂质.另外, 结果中显示, 经退火处理后3种碳纳米管在多重散射区域的峰结构呈现规律性的移动,由单壁管到多壁管, 谱峰向低能方向移动; 这是由于碳纳米管的层数不同造成的, 证明这部分谱峰结构直接受到碳纳米管层数的调制, 有利于鉴别3种碳纳米管.     

纳米氧化锌的过饱和控制生长与大小分布控制.

"在非水介质中合成了纳米氧化锌,测定了纳米氧化锌的紫外吸收光谱,并用有效质量模型计算了粒子大小,开发并命名了一种称之为纳米粒子过饱和控制生长的技术,该技术涉及将小的纳米粒子悬浊液加入到大的粒子悬浊液中,结果因为不同大小粒子间的溶解度差异小的粒子将全部溶解,大的粒子将整体长大,大粒子悬浊液的粒子数将保持不变,大粒子的生长速度显著比Ostwald老化的高．该技术最显著的特征是只要最初两悬浊液粒子大小的差异足够大,分布不是太宽,则粒子大小的分布将会因为粒子如此长大而变窄．"     

On the interaction between dislocations and cracks in one-dimensional hexagonal quasi-crystals

The solution of elasticity problems involving the interaction between dislocations and cracks plays a fundamental role in many practical and theoretical applications. Although elasticity problems involving dislocation or cracks in quasi-crystals have been investigated in many papers, the analysis is limited to a single defect. This paper investigates the interaction of defects in one-dimensional hexagonal quasi-crystals using the complex variable function method. The interaction force between two parallel dislocations is presented and the analytic solutions of elastic fields of interaction between a dislocation and a crack are obtained. A version of the well-known Peach－Koehler formula in one-dimensional hexagonal quasi-crystals is given.     

Large spot size and low-divergence angle operation of 917-nm edge-emitting semiconductor laser with an asymmetric waveguide structure

GaInAs/AlGaAs comprehensive-strained three-quantum-well lasers with asymmetric waveguide are designed and optimized. With this design, the optical field in the transverse direction is extended, and a semiconductor laser with large spot is obtained. For a 300-μm cavity length and 100-μm aperture device under continuous wave (CW) operation, the measured vertical and horizontal far-field divergence angles are 12.2° and 3.0°, respectively. The slope efficiency is 0.44 W/A and the lasing wavelength is 917 nm.The equivalent transverse spot size is 3 μm for the fundamental transverse mode, which is a sufficiently large value for the purpose of coupling and manipulation of light.     

Phonon spectrum and related thermodynamic properties of microcrack in bcc-Fe

The phonon spectrum and the related thermodynamic properties of microcracks in bcc-Fe are studied with the recursion method by using the Finnis--Sinclair (F--S) N-body potential. The initial configuration of the microcracks is established from an anisotropic linear elastic solution and relaxed to an equilibrium by molecular dynamics method. It is shown that the local vibrational density of states of the atoms near a crack tip is considerably different from the bulk phonon spectrum, which is closely associated with the local stress field around the crack tip; meanwhile, the local vibrational energies of atoms near the crack tip are higher than those of atoms in a perfect crystal. These results imply that the crack tip zone is in a complex stress state and closely related to the structure evolution of cracks. It is also found that the phonon excitation is a kind of local effect induced by microcracks. In addition, the microcrack system has a higher vibrational entropy, which reflects the character of phonon spectrum related to the stress field induced by cracks.     

光学元件亚表层裂纹成核临界条件研究

基于压痕实验和连续刚度测量法得到了熔石英材料硬度和弹性模量随压入深度的变化曲线, 系统分析了材料由延性到脆性转变的过程, 确定了熔石英晶体在静态/准静态印压和动态刻划时产生裂纹的临界载荷和临界深度。渐变载荷刻划实验结果表明, 划痕过程诱发的裂纹对法向载荷有很强的依赖性, 载荷较小时材料去除方式为延性域去除。随着法向载荷的增加, 首先产生垂直于试件表面的中位裂纹和平行于试件表面方向扩展的侧向裂纹, 而在试件表面上并没有产生明显的特征。载荷进一步增加后, 侧向裂纹扩展并形成了明亮区域, 最终诱发了沿垂直于或近似垂直于压头运动方向扩展的径向裂纹, 实现了材料的脆性去除。     

利用高压热处理技术提高Bi-2223/Ag高温超导带材临界电流

提高临界电流密度(Jc)对促进Bi-2223/Ag高温超导带材的应用有着重要意义.在常压热处理条件下所制备的带材中存在大量的裂纹、孔洞和第二相颗粒等,这些因素都会对带材的超导连接性能产生破坏作用.我们成功建立了一套可用氧气氛的热等静压设备,工作气压和温度可同时达到15MPa和850°C.通过引入裂纹愈合热处理过程,我们成功对带材进行了高压热处理,所得样品中第二相颗粒和裂纹数量大幅度降低,77K、自场下的临界电流相比常压热处理样品提高了20%左右.