1-平面图的线性荫度

图G的边分解是指将G分解成子图G₁,G₂,…,G_m,使得E(G)=E(G₁)∪…∪E(G_m),且对任意i≠j有E(G_i)∩E(G_j)=?.若一个森林的每个连通分支都是路,则称该森林为线性森林.图G的线性荫度la(G)是指使得G可以边分解为m个线性森林的最小整数m.本文利用权转移方法证明了Δ(G)≥25的1-平面图G的线性荫度为[Δ(G)/2],这里Δ(G)是图G的最大度.     

给定直径的单圈图的边修正Szeged指标的下界

连通图G的边修正Szeged指标Sz_e^*(G)定义为■,其中m_u(e|G),m_v(e|G),m₀(e|G)分别是G中到u点比到v点距离近的边的数目、到v点比到u点距离近的边的数目、以及到u,v两点距离同样近的边的数目.本文通过变换和计算得到了给定直径的单圈图的边修正Szeged指标的下界,并刻画了达到下界的极值图.     

相干梯度敏感干涉测量技术及在静态断裂力学实验中的应用

介绍了相干梯度敏感(CGS)干涉测量技术的基本原理及其在静态Ⅰ型断裂实验中的应用,验证了该方法对裂纹尖端局部变形场和断裂特性进行定量研究的可行性。给出了代表静态Ⅰ型裂纹尖端奇异场光力学信息的CGS控制方程,模拟并分析了Ⅰ型裂纹尖端的CGS条纹模式,对静态Ⅰ型裂纹尖端变形场和断裂特性进行了三点弯曲的CGS试验,并提取了应力强度因子KⅠ。结果表明,试验结果与理论分析结果相吻合。     

基于新型分子距边矢量ν与多元统计方法对于烷烃13C NMR化学位移和(CSS)估计与预测的深入研究

基于本实验室提出一种新型以势能形式表达的分子距边矢量, 深入地系统研究了核磁共振碳-13谱化学位移和(CSS)规律以及分子拓扑指数矢量在定量结构波谱关系(QSSR)中的应用. 借助多种计量化学方法包括多元线性回归、逐步多元回归、主成分回归、主筛选回归等进行分子拟模和定量相关研究, 发现烷烃¹³C NMR 化学位移和(CSS)与其分子距边矢量及路径长度指数有良好线性相关性, 回归方程及其统计参数为:CSS=bν+cp₃=∑_^mj=0b_jν_j+b₁₁p₃=b₀ν+b₁ν₁+b₂ν₂+b₃ν₃+b₄ν₄+b₅ν₅+b₆ν₆+b₇ν₇+b₈ν₈+b₉ν₉+b₁₀ν₁₀+b₁₁p₃=-13.576+22.179ν₁+28.407ν₂+25 .950ν₃+26.690ν₄+14.498ν₅+5.726ν₆-5.379ν₇-3.214ν₈-15.021ν₉ -25.710ν₁₀+12.278p₃ n=63, R=0.997, EV=99.68%, RMS=3.7348, SD=4.1 18, F= 773.116, U=144228.844, Q=864.938; CV: R²_CV=0.980, EV=98.83%, RMS=7.126 1, SD_CV=7.634, F_CV=221.720, U_CV=142121.891, Q_CV=2971 .896.结果良好.     

Phonon spectrum and related thermodynamic properties of microcrack in bcc-Fe

The phonon spectrum and the related thermodynamic properties of microcracks in bcc-Fe are studied with the recursion method by using the Finnis--Sinclair (F--S) N-body potential. The initial configuration of the microcracks is established from an anisotropic linear elastic solution and relaxed to an equilibrium by molecular dynamics method. It is shown that the local vibrational density of states of the atoms near a crack tip is considerably different from the bulk phonon spectrum, which is closely associated with the local stress field around the crack tip; meanwhile, the local vibrational energies of atoms near the crack tip are higher than those of atoms in a perfect crystal. These results imply that the crack tip zone is in a complex stress state and closely related to the structure evolution of cracks. It is also found that the phonon excitation is a kind of local effect induced by microcracks. In addition, the microcrack system has a higher vibrational entropy, which reflects the character of phonon spectrum related to the stress field induced by cracks.     

刃边法检测空间相机MTF的方法研究

空间相机的MTF是描述成像系统的空间频率响应特性的重要指标之一。在介绍刃边法计算空间相机MTF原理的基础上,描述了刃边法的计算过程,结合天绘一号卫星在轨传感器MTF检测,对高分辨率相机的MTF进行了计算。结果表明,刃边法检测卫星相机MTF的方法可行,能够获得较好的评价结果。     

FeS2多晶薄膜电子结构的实验研究

用磁控溅射方法制各纯Fe薄膜，并硫化合成FeS₂. 采用同步辐射X射线近边吸收谱与X射线光电子能谱研究了薄膜的电子结构. 结果表明，合成的FeS₂薄膜，在费米能级附近，有较强的Fe 3d态密度存在，同时，在价带谱中2—10eV处有强度较大的S 3p态密度存在；Fe的3d轨道在八面体配位场作用下分别为t_2g和e_g轨道，实验中由Fe的吸收谱计算得到两分裂能级之差为2.1eV;实验测得FeS₂价带结构中导带宽度约为2.4eV，导带上方仍存在第二能隙，其宽度约为2.8eV. 关键词： 磁控溅射 二硫化铁 X射线吸收近边结构 电子结构     

部分相干光束通过硬边光阑的推广光束传输M2因子

给出部分相干光通过硬边光阑后的强度二阶矩的计算公式，由此可得到部分相干光通过硬边光阑后的推广光束传输M^2因子。以部分相干高斯－谢尔模型光束为例，推导出相应的M^2因子，并作了数值计算和分析讨论。     

Elastic analysis of a mode II crack in a decagonal quasi—crystal

The elastic analysis of a mode II Griffith crack penetrating through a decagonal quasi-crystal along the periodic axis is made within the context of the continuum theory. By using a general solution obtained previously, the problem in the case of uniform shear stress at infinity is solved, and the analytical expressions for the entire stress field disturbed by an internal crack are derived in an explicit form. The asymptotic fields of the displacement and stress around a crack tip in both phonon and phason fields indicate that the stresses near a crack tip exhibit the square-root singularity. The formula for evaluating the energy release rate is also given. If imposing that the phason field is absent, the well-known results of a mode II crack in a conventional material are recovered from the present results.     

线弹簧模型法在含表面裂纹球壳中的应用

本文应用线弹簧模型法,基于Sih.G.C.含二维裂纹球壳理论建立了含表面裂纹球壳的控制方程,采用数值方法选取位移试函数及合理地处理了对偶奇异积分方程使计算大为简化,通过电算实现了计算求解过程,从而获得了球壳表面裂纹前沿各点的应力强度因子之值。 最后将计算结果与考虑“膨胀效应”后的Ncwoun-Raju 解进行了比较,同时研究了曲率因素对表面裂纹线弹性断裂性态的影响。