Pt3Co核-Pt壳型纳米粒子的制备及磁性

Pt₃Co alloy nanoparticles were prepared by the reduction of H₂PtCl₆ and Co(OOCCH₃)₂ using NaBH₄ as a reducing agent. The Pt₃Co core-Pt shell nanoparticles (Pt₃Co@Pt) were synthesized using hydrogen absorption reduction and characterized by plasma-atomic emission spectrometry (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and SQUID magnetometer. The results show that average size of Pt₃Co@Pt nanoparticles is 3.6 nm with a standard deviation of 0.9 nm. Heating Pt₃Co nanoparticles in air at 700 ℃ for 1 h, Co in Pt₃Co nanoparticles was oxidized to Co₃O₄ and CoO; while no oxidation tendency was detected for Pt₃Co@Pt nanoparticles. The crystallize structure of Pt₃Co@Pt changed from the face centered cube (fcc) to the face centered tetragonal (fct) after the heating treatment. The coercivity of the heated Pt₃Co@Pt reached to 276 Oe at room temperature.     

MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

用ＴＥＭ和电位滴定法对不同配方和工艺条件得到的胶粒形态结构和羧基分别进行了表征。结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构,但是,核层在反应过程中由于聚合物簇的迁移会造成形变。由于胶粒中聚合物浓度高,粘度大,因而胶粒形态变化受动力学影响甚大,羧基分布主要是由动力学确定的。     

铝原子簇上化学吸附的尺度效应及其理论模型

对铝原子簇Al_n(n=1～10,12,13)已报导过的理论预测几何构型进行合理选择, 用量子化学CNDO/2法研究了单分子一氧化碳在这些簇上取不同吸附位形时的吸附作用。结果表明吸附强度随簇尺度的变化呈“幻数”特性: Al_2、Al_6、Al_(12)簇具有特别高的吸附能, 与实验观测结果相符。采用作者建议的推广电子壳模型可合理解释这一尺度效应。对Al_(12)和Al_(13)簇电子结构的分析进一步支持了壳模型的观点。随着簇的增大, 尺度效应逐步减弱并趋向于体相铝的性质。     

壳寡糖与镧、铈配合物的合成、表征及应用

合成了壳寡糖，镧和壳寡糖，铈配合物，用红外光谱和紫外光谱进行了表征，并证实了氮，金属(N-M)键的形成，元素分析证实配合物中各元素C：H：N：La或Ce的原子个数比分别接近于24：44：4：1，即相当于配位数为4。壳寡糖一镧和壳寡糖一铈较未配位的镧或铈具有更强的催化氧化能力。配合物除去废液中磷[(PO)^3-4]的效果比未配位的镧和铈提高10％。配合物可提高蔬菜、水稻种子的发芽率，促进作物的营养生长，提高水稻产量3，3％，提高黄瓜产量12％～15％，对十字花科蔬菜的病毒有一定的抑制作用。     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

Effects of Cone Angles on Nonlinear Vibration Responses of Functionally Graded Shells北大核心CSCD

The nonlinear vibration responses of functionally graded materials (FGMs) shells with different cone angles under external loads were studied. Firstly, the Voigt model was employed to describe the physical properties along the thickness direction of FGMs conical shells. Then, the motion equations were derived based on the 1st-order shear deformation theory, the von Kármán geometric nonlinearity and Hamilton’s principle. Next, the Galerkin method was applied to discretize the motion equations and the governing equations were simplified into a 1DOF nonlinear vibration differential equation under Volmir’s assumption. Finally, the nonlinear motion equations were solved with the harmonic balance method and the Runge-Kutta method, and the amplitude frequency response characteristic curves of the FGMs conical shells were obtained. The effects of different material distribution functions and different ceramic volume fraction exponents on the amplitude frequency response curves of conical shells were discussed. The bifurcation diagrams of conical shells with different cone angles, as well as time process diagrams and phase diagrams for different excitation amplitudes, were described. The motion characteristics were characterized by Poincaré maps. The results show that, the FGMs conical shells present the nonlinear characteristics of hardening springs. The chaotic motions of the FGMs conical shells are restrained and not prone to motion instability with the increase of the cone angle. The FGMs conical shell present a process from the periodic motion to the multi-periodic motion and then to chaos with the increase of the excitation amplitude. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

亮氨酸与异亮氨酸在金/银核-壳复合纳米粒子上的吸附状态

The Raman spectra and Surface enhanced Raman spectra (SERS) of leucine and isoleucine adsorbed on core-shell Au/Ag nanoparticles were obtained and assigned, and the different Raman peaks resulting from different vibrational models of the isomers忆groups were analysed. In Raman spectra, the leucine’s (ω(CH3)) is at 962, 945, 924 cm-1, (δas(CH3)) at 1408, 1454 cm-1; corresponding values for isoleucine are, 922 cm-1 and 1448, 1420, 1394 cm-1, respectwely. The difference in the peak positions of corresponding groups between leucine and isoleucine is more apparent in the SERS at acidic and basic conditions. The relationship between leucine and isoleucine’s concentration and SERS was interpreted preliminarily and the adsorption model on the core-shell Au/Ag nanoparticle surface was speculated.     

Au和SiO2多壳结构的制备和表征

利用自组装技术和胶体还原化学, 制备出金纳米壳Au@SiO₂以及SiO₂包裹的金纳米壳SiO₂@Au@SiO₂; 去除SiO₂@Au@SiO₂颗粒中的金壳层, 获得含有可移动SiO₂核的空心壳H-SiO₂@M-SiO₂. 结果显示: SiO₂@Au@SiO₂复合颗粒表面光滑, 并保留了金壳的近红外吸收特性; 通过改变复合颗粒外层SiO₂厚度, 可以调节其等离激元共振峰的位置; 王水可以有效地去除SiO₂@Au@SiO₂中的金壳, 相应的等离激元共振峰消失.     

反胶束法合成氧化锌微晶及其荧光特性

0引言材料的结构(微结构)、尺寸和形貌等因素对其特性及其实际应用具有重要的影响。对无机材料特别是氧化物半导体进行结构控制的研究近年来引起了人们极大的关注。氧化锌作为一种宽带隙(3.2eV)半导体材料,可广泛应用于压电材料、气体传感器、橡胶添加剂和光学器件等领域,而且还因其在室温下可产生激射现象使其成为纳米光学材料研究领域中的一大热点[1￣6]。目前,除了传统的固相-气相(V S)反应外,用于氧化锌微晶的制备方法主要有共沉淀法[7]、多羟基化合物水解法[8]、有机金属气相沉积法[9￣12]和水热法[13]等。通过选择不同的制备方法和…     

Synthesis of Fullerene-Acrylamide Copolymer Nanoball and Its Lubrication Properties

A novel fuUerene-acrylamide copolymer was synthesized via radical polymerization. It is soluble in polar solvents such as water, dimethyl sulfoxide etc. The product was characterized by FTIR, UV-Vis and GPC. TEM analysis shows that the average particle diameter is about 46 nm. Four-ball tests show that the addition of a certain concentration of the fullerene copolymer to base stock (2 wt% triethanolamine and 0.5 wt% OPZ aqueous solution) can effectively raise the load-carrying capacity (PB value) and the antiwear ability. SEM analysis shows that the addition results in reducing diameter of wear scar and decreasing wear.