变形镜波前补偿能力的空间频域分析

 利用滤波器原理从空间频域分析了连续镜面分立驱动变形镜对波前的补偿能力。将变形镜等效为一高通滤波器，通过数值计算分析了滤波器函数与驱动器密度、高斯指数、交连值等变形镜主要参数的关系，解释了参数变化对波前拟合能力的影响。结果表明：驱动器密度是波前补偿能力的决定因素，增大高斯指数和交连值一定程度上有利于低空间频率波前的补偿。应用中应该根据待补偿波前的特征正确地选择和调整变形镜参数。     

激光清洗实时监测技术研究

针对目前在研激光清洗的实时监测问题进行实验和分析。得出两个结论:激光清洗具有传统方法无法具有的优越性,可以节省大量人力物力成为新型清洗方法而受到重视,激光清洗在设备维修保养中显示了良好的应用前景。激光清洗过程中产生的声发射信号包含了清洗过程的大量信息,利用声发射检测系统可以对激光清洗过程实时监控。     

Optimization of Metamorphic InGaAs Quantum Wells on GaAs Grown by Molecular Beam Epitaxy

We investigate the molecular beam epitaxy growth of metamorphic InxGal-xAs materials （x up to 0.5） on GaAs substrates systematically. Optimization of structure design and growth parameters is aimed at obtaining smooth surface and high optical qualdty. The optimized structures have an average surface roughness of 0.9-1.8 nm. It is also proven by PL measurements that the optical properties of high indium content （55%） InGaAs quantum wells are improved apparently by defect reduction technique and by introducing Sb as a surfactant. These provide us new ways for growing device quality metamorphic structures on GaAs substrates with long-wavelength emissions.     

光束旋转90°多程放大系统的波前误差校正

光束通过神光-Ⅲ原型装置四程放大系统发生了90°旋转和扩束。在四程放大系统腔镜处放置变形镜校正系统像差是一种新的自适应光学方案，推导出被校正像差与变形镜面形之间的数学关系。理论推导表明，在扩束比大于1的前提下，腔镜处变形镜可以校正系统输出的任意类型的像差，且变形镜对应的面形唯一。理论分析和计算仿真说明该方案的校正能力与像差类型和扩束比有关，扩束比增大将增强变形镜校正像散的能力，但系统旋光消像散的能力也将减弱。     

德国F125护卫舰将装备新型红外监视系统

为了增强德国海军新型F125护卫舰在稳定行动中的军队保护水平和安全性，德国国防采购局决定采购迪尔BGT防务公司的360。红外监视系统。这种新的红外监视系统具体的名称为SIMONE（船载红外监测、观察和导航装备）系统。据称，SIMONE系统可自动预警各种潜在的不对称威胁，如从陆地、海面或空中接近的特种部队、恐怖分子或海盗。     

变形双重介质分形油藏非达西流动分析

考虑与实际生产相符的介质的双重特性和分形特征,并考虑介质的变形,引入双重分形介质渗透率模数,建立应力敏感地层双重分形介质系统的流动方程.采用Douglas-Jones预估-校正法获得无限大地层定产量生产时变形双重分形介质模型的数值解和无限大地层定压生产时分形介质双孔模型的数值解,作出了典型的压力曲线图版.     

Effects of Radius and Orientation of Single-Walled Carbon Nanotubes on Their Nonlinear Tensile Deformation Behaviour

By capturing the atomic information and reflecting the behaviour governed by a nonlinear potential function, an analytical molecular mechanics approach is applied to establish the constitutive relation for single-walled carbon nanotubes （SWCNTs）. The nonlinear tensile deformation curves of zigzag and armchair nanotubes with different radii are predicted, and the elastic properties of these SWCNTs are obtained. A conclusion is made that the nanotube radius has little effect on the mechanical behaviour of SWCNTs subject to simple tension, while the nanotube orientation has larger influence.     

套管外压挤毁强度分析与计算

在对大量的套管全尺寸挤毁试验结果分析的基础上，提出套管外压失稳机理：实际工程中的套管截面不是理想圆，在外压作用下的非圆套管圆周方向上环向应力分布不均匀，有附加弯矩效应；随外压增加，在最大压缩环向应力处达到屈服；当屈服逸到一定程度时，材料由于强度承载力不足而失效，导致套管发生失稳挤毁。基于上述套管强度挤毁准则，分析了理想弹塑性套管在轴向载荷作用下的抗挤强度计算方法，得到较保守的套管挤毁压力计算公式。与试验结果对比表明：导出的计算公式偏差较小，计算精度满足工程要求，失稳强度准则是适用的。     

Subgrid-scale contributions to Lagrangian time correlations in isotropic turbulence

The application of large-eddy simulation （LES） to particle-laden turbulence raises such a fundamental question as whether the LES with a subgrid scale （SGS） model can correctly predict Lagrangian time correlations （LTCs）. Most of the currently existing SGS models are constructed based on the energy budget equations. Therefore, they are able to correctly predict energy spectra, but they may not ensure the correct prediction on the LTCs. Previous researches investigated the effect of the SGS modeling on the Eulerian time correlations. This paper is devoted to study the LTCs in LES. A direct numerical simulation （DNS） and the LES with a spectral eddy viscosity model are performed for isotropic turbulence and the LTCs are calculated using the passive vector method. Both a priori and a posteriori tests are carried out. It is observed that the subgrid;scale contributions to the LTCs cannot be simply ignored and the LES overpredicts the LTCs than the DNS. It is concluded from the straining hypothesis that an accurate prediction of enstrophy spectra is most critical to the prediction of the LTCs.