Synthesis and Characterization of Fluoro- and Chloro- bimetallic Alkoxides as Precursors for Luminescent Metal Oxide Materials via Sol-Gel Technique

Heterobimetallic alkoxides are broadly recognized as versatile precursors for luminescence materials, and efforts are being made to develop novel routes by applying the concept of geometrical molecular design, for their synthesis and to design a single source precursor suited to photoluminescent materials. Novel and new series of bimetallic alkoxides has been prepared by metathesis route. They exhibit a lower sensitivity towards hydrolysis and so they are easier to handle as compared to other alkoxides. All the compounds were characterized by elemental analysis, FT-IR and multinuclear NMR spectroscopies. FT-IR revealed that the molecular structure of these metal alkoxides was retained to a large extent in 4 ： 1 halogenated alcohol-benzene solution. The heteronuclear NMR spectroscopy provided useful information about chemical shifts for better understanding the likely structure based on interactions with their coordinate metals. The mass spectra show similar types of fragmentation pattern. SEM-EDS analyses showed consistency with the formulation. XRD patterns show an enhanced homogeneity at high temperature. TGA measurements show that thermal decomposition occured in steps that depended entirely on the chemical compositions and the synthesis routes. SEM observation reveals that the morphology and particle size strongly depend on synthesis routes for their precursors.     

铌酸锂晶体性能的组成依赖性(英文)

总结了铌酸锂晶体的各项性能指标,显示了其对晶体实际组成的强烈依赖性.利用化学键模型定量地解释了这种依赖性产生的根源,从而说明了制约该晶体性能提高的关键因素是晶体结构中的缺陷控制.     

17世纪名画“几何学寓言”中的几何命题探析

以17世纪的一幅名画“几何学寓言”为素材,探讨其中的几何命题的证明以及命题的推广,试图从中获得一些思想启迪,为初中几何教学提供参考.     

曲率流的参数化有限元逼近

许多物理现象可以在数学上描述为受曲率驱动的自由界面运动,例如薄膜和泡沫的演变、晶体生长,等等.这些薄膜和界面的运动常依赖于其表面曲率,从而可以用相应的曲率流来描述,其相关自由界面问题的数值计算和误差分析一直是计算数学领域中的难点.参数化有限元法是曲率流的一类有效计算方法,已经能够成功模拟一些曲面在几类基本的曲率流下的演化过程.本文重点讨论曲率流的参数化有限元逼近,它的产生、发展和当前的一些挑战.     

“几何图霸”在高中立体几何教学中的应用策略

“几何图霸”是一款用于绘制动态几何图形的计算机软件.随着信息技术2.0的到来,“几何图霸”在教学中的应用得到了越来越多教师的青睐.本文通过几个实例来探究“几何图霸”在高中立体几何教学中的应用策略,希望对在教学一线的数学教师有所帮助.     

用ab initio方法研究NaN_3的几何构型、电子结构和热力学、动力学性质

用ａｂｉｎｉｔｉｏＭＯ方法，在ＭＰ２（ｆｕｌ）／６３１１Ｇ水平下，全优化计算了叠氮化钠（ＮａＮ３）分子的线状和环状两种稳定构型及其转化过渡态的几何参数、电荷分布、分子总能量和振动频率，并研究了它们的热力学性质及转化速率常数和平衡常数．结果表明，线状比环状构型稍稳定（能量低６．０４ｋＪ／ｍｏｌ）；两者相互转化的能垒分别为１３．１５ｋＪ／ｍｏｌ（线型→环状）和７．１１ｋＪ／ｍｏｌ（环状→线型）．热力学和动力学计算均表明：ＮａＮ３通常主要以线型结构存在（占８５％以上），且随温度升高而增多（在１０００Ｋ大于９１％）．     

沙蚕毒系化合物的结构与生物活性关系

用ＭＮＤＯ－ＰＭ３方法对沙蚕毒系化合物二氢沙蚕毒，硫氰酸酯，巴丹，杀虫单及其异构件的几何构型进行了全自由度优化，并计算了其电子结构，讨论了生物活性与几何构型和电了结构的关系。     

镀液中Ce^3＋离子对锡镀层结构缺陷和可焊性的影响

应用荧光分析法、X光电子能谱法(XPS)及正电子湮没寿命谱法(PALS)等研究了从含硫酸铈添加剂的酸性光亮锡镀液获得的锡镀层结构缺陷与可焊性的关系。结果表明,电镀时Ce与Sn不发生共沉积,Ce~(3+)的主要作用是阻化Sn~(2+)的水解和氧化使镀液稳定,因而使锡镀层纯度提高、结构致密、表层氧含量减少,有利于提高镀层的可焊性。当Ce~(3+)浓度控制在3.5g/L左右时,可使镀层结构缺陷较少,可焊性较佳,说明结构缺陷是影响锡镀层可焊性的直接原因。     

优化几何构型对高级别从头算能量的影响

对《ＣＲＣ物理与化学手册》（第７７版）中第三周期以前的无机双原子分子,当其理论优化构型的相对误差大于２％时,分别在实验构型和最大偏差的理论构型下,计算了ＱＣＩＳＤ（Ｔ）／６－３１１＋Ｇ（３ｄｆ,２ｐ）能量并作了比较。结果表明,大多数能量的差别在４．２ｋＪ．ｍｏｌ＾－１以内。由此说明,目前一般采用的构型优化理论方法,多数情况下不至于明显影响单点高级别从头算的计算精度。同时还发现,Ｇ２（ＱＣＩ）的高级     

高氯酸二水邻菲咯啉合铜配合物的合成和晶体结构

Crystal structure of the title compound， Cu(phen)(H₂O)₂·ClO₄(phen=1，10-phenanthroline)， was deter-mined by X-ray crystallography. It crystallizes in the monoclinic system， space group C2/c with lattice parameters a=1.49071(4)nm， b=1.38594(4)nm， c=0.70292(1)nm， β=108.509(1)° and Z=4; The Cu(Ⅰ) ion is chelated by a phen ligand and two aqua ligands in cis arrangement and assumes a C2 symmetric square-planar geometry with the CuN₂O₂ core. Eight Cu(phen)(H₂O)₂·ClO₄ molecules are interconnected by strong hydrogen bonds between coordinated water molecules and uncoordinated perchlorate anions to form a molecular scale cavities along c axis. The bond distances of Cu-N and Cu-O are 0.2003(4)nm and 0.1973(3)nm， respectively. CCDC： 197600.